[PATCH v4 00/12] mmc: Add support to Marvell Xenon SD Host Controller
Marcin Wojtas
mw at semihalf.com
Wed Dec 14 11:02:57 PST 2016
Resend in plain text, sorry for noise.
2016-12-14 20:02 GMT+01:00 Marcin Wojtas <mw at semihalf.com>:
> Hi Gregory,
>
> Checked a3700 and a7k (both interfaces, CP - one after changing to use eMMC
> variant in DT). Everything works fine. You can add:
>
> Tested-by: Marcin Wojtas <mw at semihalf.com>
>
> Best regards,
> Marcin
>
> 2016-12-13 18:48 GMT+01:00 Gregory CLEMENT
> <gregory.clement at free-electrons.com>:
>>
>> Hello,
>>
>> This the forth version of the series adding support for the SDHCI
>> Xenon controller. It can be currently found on the Armada 37xx and the
>> Armada 7K/8K but will be also used in more Marvell SoC (and not only
>> the mvebu ones actually).
>>
>> v3 -> v4:
>> For this version a few change have been done:
>> - fixes 2 bug reported by kbuild-bot
>> - remove extra of_node_put()
>> - convert 0 in false for function returning boolean
>>
>> - add a device tree node for the sdhci controller present on the CP
>> master for A7K/A8K. It also led to rename the sdhci0 node on AP to
>> ap_sdhci0 to make a distinction with the one present on CP master.
>>
>> v2 -> v3
>> I think that now most (if not all) the remarks had been taking into
>> account since the second version. According to Ziji Hu, here are the
>> following changes:
>> " Changes in V3:
>> Adjust and improve Xenon DT bindings. Move some caps setting from driver
>> into
>> DT. Use mmc-card sub-node to represent eMMC type.
>> Remove PHY Sampling Fixed Delay Line scan in lower speed mode.
>> Improve Xenon probe and ->init_card() functions.
>> Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control.
>> Split PHY patch into two smaller patches.
>> Temporarily remove AXI clock before its implementation is improved."
>>
>> Besides this changes I also
>> - Removed the sdhci-xenon-phy.h and moved its content in the
>> shc-xenon-phy.c file.
>> - Fixed the tuning-count usage
>> - Managed the error case for clk_prepare_enable
>>
>> For the record the change from v1 was:
>> " Changes in V2:
>> rebase on v4.9-rc2.
>> Re-write Xenon bindings. Ajust Xenon DT property naming.
>> Add a new DT property to indicate eMMC card type, instead of using
>> variable card_candidate.
>> Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data
>> Add support to HS400 retuning."
>>
>> Thanks,
>>
>> Gregory
>>
>> Gregory CLEMENT (3):
>> arm64: dts: marvell: add eMMC support for Armada 37xx
>> arm64: dts: marvell: add sdhci support for Armada 7K/8K
>> arm64: configs: enable SDHCI driver for Xenon
>>
>> Hu Ziji (9):
>> mmc: sdhci: Export sdhci_set_ios() from sdhci.c
>> mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
>> mmc: sdhci: Export sdhci_execute_tuning() in sdhci.c
>> mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
>> MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
>> dt: bindings: Add bindings for Marvell Xenon SD Host Controller
>> mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
>> mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
>> mmc: sdhci-xenon: Add SOC PHY PAD voltage control
>>
>> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 197 ++-
>> MAINTAINERS | 7 +-
>> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 17 +-
>> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +-
>> arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +-
>> arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 9 +-
>> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 10 +-
>> arch/arm64/configs/defconfig | 1 +-
>> drivers/mmc/host/Kconfig | 9 +-
>> drivers/mmc/host/Makefile | 3 +-
>> drivers/mmc/host/sdhci-xenon-phy.c | 908
>> +++++++-
>> drivers/mmc/host/sdhci-xenon.c | 615
>> +++++-
>> drivers/mmc/host/sdhci-xenon.h | 111 +-
>> drivers/mmc/host/sdhci.c | 14 +-
>> drivers/mmc/host/sdhci.h | 5 +-
>> 15 files changed, 1926 insertions(+), 5 deletions(-)
>> create mode 100644
>> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
>> create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
>> create mode 100644 drivers/mmc/host/sdhci-xenon.c
>> create mode 100644 drivers/mmc/host/sdhci-xenon.h
>>
>> base-commit: 9fe68cad6e74967b88d0c6aeca7d9cd6b6e91942
>> --
>> git-series 0.9.1
>
>
More information about the linux-arm-kernel
mailing list