[PATCH v3 1/2] ARM: ep93xx: Register ts73xx-fpga manager driver for TS-7300
Florian Fainelli
f.fainelli at gmail.com
Wed Dec 14 10:47:07 PST 2016
On 12/13/2016 10:14 PM, Moritz Fischer wrote:
> Hi Florian,
>
> On Tue, Dec 13, 2016 at 6:35 PM, Florian Fainelli <f.fainelli at gmail.com> wrote:
>> Register the TS-7300 FPGA manager device drivers which allows us to load
>> bitstreams into the on-board Altera Cyclone II FPGA.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
>> ---
>> arch/arm/mach-ep93xx/ts72xx.c | 26 ++++++++++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
>> index 3b39ea353d30..acf72ea670ef 100644
>> --- a/arch/arm/mach-ep93xx/ts72xx.c
>> +++ b/arch/arm/mach-ep93xx/ts72xx.c
>> @@ -230,6 +230,28 @@ static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
>> .phy_id = 1,
>> };
>>
>> +#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
>> +
>> +/* Relative to EP93XX_CS1_PHYS_BASE */
>> +#define TS73XX_FPGA_LOADER_BASE 0x03c00000
>> +
>> +static struct resource ts73xx_fpga_resources[] = {
>> + {
>> + .start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
>> + .end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
>> + .flags = IORESOURCE_MEM,
>> + },
>> +};
>> +
>> +static struct platform_device ts73xx_fpga_device = {
>> + .name = "ts73xx-fpga-mgr",
>> + .id = -1,
>> + .resource = ts73xx_fpga_resources,
>> + .num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
>> +};
>> +
>> +#endif
>> +
>> static void __init ts72xx_init_machine(void)
>> {
>> ep93xx_init_devices();
>> @@ -238,6 +260,10 @@ static void __init ts72xx_init_machine(void)
>> platform_device_register(&ts72xx_wdt_device);
>>
>> ep93xx_register_eth(&ts72xx_eth_data, 1);
>> +#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
>> + if (board_is_ts7300())
>> + platform_device_register(&ts73xx_fpga_device);
>> +#endif
>> }
>>
>> MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
>> --
>> 2.9.3
>>
>
> I think this is backwards, shouldn't this be your [PATCH 2/2]?
> Otherwise you're using
> the driver before you added it.
I can definitively re-order the patches, although I don't think this
really makes a difference, a driver without device does nothing, and
vice versa.
--
Florian
More information about the linux-arm-kernel
mailing list