[PATCH v4 08/12] mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC.
Gregory CLEMENT
gregory.clement at free-electrons.com
Tue Dec 13 09:48:37 PST 2016
From: Hu Ziji <huziji at marvell.com>
Marvell Xenon eMMC/SD/SDIO Host Controller contains PHY.
Multiple types of PHYs are supported.
Add support to multiple types of PHYs init and configuration.
Add register definitions of PHYs.
Xenon PHY cannot fit in kernel common PHY framework.
Xenon SDHC PHY register is a part of Xenon SDHC register set.
Besides, MMC initialization has to call several PHY functions
to complete timing setting.
Those PHY setting functions have to access SDHC registers
and know current MMC setting, such as bus width, clock frequency
and speed mode.
As a result, implement Xenon PHY in MMC host directory.
Signed-off-by: Hu Ziji <huziji at marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
drivers/mmc/host/Makefile | 2 +-
drivers/mmc/host/sdhci-xenon-phy.c | 799 ++++++++++++++++++++++++++++++-
drivers/mmc/host/sdhci-xenon.c | 3 +-
drivers/mmc/host/sdhci-xenon.h | 39 +-
4 files changed, 841 insertions(+), 2 deletions(-)
create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 75eaf743486c..4f2854556ff7 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -82,4 +82,4 @@ ifeq ($(CONFIG_CB710_DEBUG),y)
endif
obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o
-sdhci-xenon-driver-y += sdhci-xenon.o
+sdhci-xenon-driver-y += sdhci-xenon.o sdhci-xenon-phy.o
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c b/drivers/mmc/host/sdhci-xenon-phy.c
new file mode 100644
index 000000000000..453c5076761c
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -0,0 +1,799 @@
+/*
+ * PHY support for Xenon SDHC
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author: Hu Ziji <huziji at marvell.com>
+ * Date: 2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/of_address.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+/* Register base for eMMC PHY 5.0 Version */
+#define SDHCI_EMMC_5_0_PHY_REG_BASE 0x0160
+/* Register base for eMMC PHY 5.1 Version */
+#define SDHCI_EMMC_PHY_REG_BASE 0x0170
+
+#define SDHCI_EMMC_PHY_TIMING_ADJUST SDHCI_EMMC_PHY_REG_BASE
+#define SDHCI_EMMC_5_0_PHY_TIMING_ADJUST SDHCI_EMMC_5_0_PHY_REG_BASE
+#define SDHCI_TIMING_ADJUST_SLOW_MODE BIT(29)
+#define SDHCI_TIMING_ADJUST_SDIO_MODE BIT(28)
+#define SDHCI_OUTPUT_QSN_PHASE_SELECT BIT(17)
+#define SDHCI_SAMPL_INV_QSP_PHASE_SELECT BIT(18)
+#define SDHCI_SAMPL_INV_QSP_PHASE_SELECT_SHIFT 18
+#define SDHCI_PHY_INITIALIZAION BIT(31)
+#define SDHCI_WAIT_CYCLE_BEFORE_USING_MASK 0xF
+#define SDHCI_WAIT_CYCLE_BEFORE_USING_SHIFT 12
+#define SDHCI_FC_SYNC_EN_DURATION_MASK 0xF
+#define SDHCI_FC_SYNC_EN_DURATION_SHIFT 8
+#define SDHCI_FC_SYNC_RST_EN_DURATION_MASK 0xF
+#define SDHCI_FC_SYNC_RST_EN_DURATION_SHIFT 4
+#define SDHCI_FC_SYNC_RST_DURATION_MASK 0xF
+#define SDHCI_FC_SYNC_RST_DURATION_SHIFT 0
+
+#define SDHCI_EMMC_PHY_FUNC_CONTROL (SDHCI_EMMC_PHY_REG_BASE + 0x4)
+#define SDHCI_EMMC_5_0_PHY_FUNC_CONTROL \
+ (SDHCI_EMMC_5_0_PHY_REG_BASE + 0x4)
+#define SDHCI_ASYNC_DDRMODE_MASK BIT(23)
+#define SDHCI_ASYNC_DDRMODE_SHIFT 23
+#define SDHCI_CMD_DDR_MODE BIT(16)
+#define SDHCI_DQ_DDR_MODE_SHIFT 8
+#define SDHCI_DQ_DDR_MODE_MASK 0xFF
+#define SDHCI_DQ_ASYNC_MODE BIT(4)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL (SDHCI_EMMC_PHY_REG_BASE + 0x8)
+#define SDHCI_EMMC_5_0_PHY_PAD_CONTROL \
+ (SDHCI_EMMC_5_0_PHY_REG_BASE + 0x8)
+#define SDHCI_REC_EN_SHIFT 24
+#define SDHCI_REC_EN_MASK 0xF
+#define SDHCI_FC_DQ_RECEN BIT(24)
+#define SDHCI_FC_CMD_RECEN BIT(25)
+#define SDHCI_FC_QSP_RECEN BIT(26)
+#define SDHCI_FC_QSN_RECEN BIT(27)
+#define SDHCI_OEN_QSN BIT(28)
+#define SDHCI_AUTO_RECEN_CTRL BIT(30)
+#define SDHCI_FC_ALL_CMOS_RECEIVER 0xF000
+
+#define SDHCI_EMMC5_FC_QSP_PD BIT(18)
+#define SDHCI_EMMC5_FC_QSP_PU BIT(22)
+#define SDHCI_EMMC5_FC_CMD_PD BIT(17)
+#define SDHCI_EMMC5_FC_CMD_PU BIT(21)
+#define SDHCI_EMMC5_FC_DQ_PD BIT(16)
+#define SDHCI_EMMC5_FC_DQ_PU BIT(20)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL1 (SDHCI_EMMC_PHY_REG_BASE + 0xC)
+#define SDHCI_EMMC5_1_FC_QSP_PD BIT(9)
+#define SDHCI_EMMC5_1_FC_QSP_PU BIT(25)
+#define SDHCI_EMMC5_1_FC_CMD_PD BIT(8)
+#define SDHCI_EMMC5_1_FC_CMD_PU BIT(24)
+#define SDHCI_EMMC5_1_FC_DQ_PD 0xFF
+#define SDHCI_EMMC5_1_FC_DQ_PU (0xFF << 16)
+
+#define SDHCI_EMMC_PHY_PAD_CONTROL2 (SDHCI_EMMC_PHY_REG_BASE + 0x10)
+#define SDHCI_EMMC_5_0_PHY_PAD_CONTROL2 \
+ (SDHCI_EMMC_5_0_PHY_REG_BASE + 0xC)
+#define SDHCI_ZNR_MASK 0x1F
+#define SDHCI_ZNR_SHIFT 8
+#define SDHCI_ZPR_MASK 0x1F
+/* Perferred ZNR and ZPR value vary between different boards.
+ * The specific ZNR and ZPR value should be defined here
+ * according to board actual timing.
+ */
+#define SDHCI_ZNR_DEF_VALUE 0xF
+#define SDHCI_ZPR_DEF_VALUE 0xF
+
+#define SDHCI_EMMC_PHY_DLL_CONTROL (SDHCI_EMMC_PHY_REG_BASE + 0x14)
+#define SDHCI_EMMC_5_0_PHY_DLL_CONTROL \
+ (SDHCI_EMMC_5_0_PHY_REG_BASE + 0x10)
+#define SDHCI_DLL_ENABLE BIT(31)
+#define SDHCI_DLL_UPDATE_STROBE_5_0 BIT(30)
+#define SDHCI_DLL_REFCLK_SEL BIT(30)
+#define SDHCI_DLL_UPDATE BIT(23)
+#define SDHCI_DLL_PHSEL1_SHIFT 24
+#define SDHCI_DLL_PHSEL0_SHIFT 16
+#define SDHCI_DLL_PHASE_MASK 0x3F
+#define SDHCI_DLL_PHASE_90_DEGREE 0x1F
+#define SDHCI_DLL_FAST_LOCK BIT(5)
+#define SDHCI_DLL_GAIN2X BIT(3)
+#define SDHCI_DLL_BYPASS_EN BIT(0)
+
+#define SDHCI_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST \
+ (SDHCI_EMMC_5_0_PHY_REG_BASE + 0x14)
+#define SDHCI_EMMC_PHY_LOGIC_TIMING_ADJUST (SDHCI_EMMC_PHY_REG_BASE + 0x18)
+#define SDHCI_LOGIC_TIMING_VALUE 0x00AA8977
+
+enum soc_pad_ctrl_type {
+ SOC_PAD_SD,
+ SOC_PAD_FIXED_1_8V,
+};
+
+/*
+ * List offset of PHY registers and some special register values
+ * in eMMC PHY 5.0 or eMMC PHY 5.1
+ */
+struct xenon_emmc_phy_regs {
+ /* Offset of Timing Adjust register */
+ u16 timing_adj;
+ /* Offset of Func Control register */
+ u16 func_ctrl;
+ /* Offset of Pad Control register */
+ u16 pad_ctrl;
+ /* Offset of Pad Control register 2 */
+ u16 pad_ctrl2;
+ /* Offset of DLL Control register */
+ u16 dll_ctrl;
+ /* Offset of Logic Timing Adjust register */
+ u16 logic_timing_adj;
+ /* DLL Update Enable bit */
+ u32 dll_update;
+};
+
+static const char * const phy_types[] = {
+ "emmc 5.0 phy",
+ "emmc 5.1 phy"
+};
+
+enum phy_type_enum {
+ EMMC_5_0_PHY,
+ EMMC_5_1_PHY,
+ NR_PHY_TYPES
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_0_phy_regs = {
+ .timing_adj = SDHCI_EMMC_5_0_PHY_TIMING_ADJUST,
+ .func_ctrl = SDHCI_EMMC_5_0_PHY_FUNC_CONTROL,
+ .pad_ctrl = SDHCI_EMMC_5_0_PHY_PAD_CONTROL,
+ .pad_ctrl2 = SDHCI_EMMC_5_0_PHY_PAD_CONTROL2,
+ .dll_ctrl = SDHCI_EMMC_5_0_PHY_DLL_CONTROL,
+ .logic_timing_adj = SDHCI_EMMC_5_0_PHY_LOGIC_TIMING_ADJUST,
+ .dll_update = SDHCI_DLL_UPDATE_STROBE_5_0,
+};
+
+static struct xenon_emmc_phy_regs xenon_emmc_5_1_phy_regs = {
+ .timing_adj = SDHCI_EMMC_PHY_TIMING_ADJUST,
+ .func_ctrl = SDHCI_EMMC_PHY_FUNC_CONTROL,
+ .pad_ctrl = SDHCI_EMMC_PHY_PAD_CONTROL,
+ .pad_ctrl2 = SDHCI_EMMC_PHY_PAD_CONTROL2,
+ .dll_ctrl = SDHCI_EMMC_PHY_DLL_CONTROL,
+ .logic_timing_adj = SDHCI_EMMC_PHY_LOGIC_TIMING_ADJUST,
+ .dll_update = SDHCI_DLL_UPDATE,
+};
+
+/*
+ * eMMC PHY configuration and operations
+ */
+struct emmc_phy_params {
+ bool slow_mode;
+
+ u8 znr;
+ u8 zpr;
+
+ /* Nr of consecutive Sampling Points of a Valid Sampling Window */
+ u8 nr_tun_times;
+ /* Divider for calculating Tuning Step */
+ u8 tun_step_divider;
+};
+
+static int alloc_emmc_phy(struct sdhci_xenon_priv *priv)
+{
+ struct emmc_phy_params *params;
+
+ params = kzalloc(sizeof(*params), GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ priv->phy_params = params;
+ if (priv->phy_type == EMMC_5_0_PHY)
+ priv->emmc_phy_regs = &xenon_emmc_5_0_phy_regs;
+ else
+ priv->emmc_phy_regs = &xenon_emmc_5_1_phy_regs;
+
+ return 0;
+}
+
+/*
+ * eMMC 5.0/5.1 PHY init/re-init.
+ * eMMC PHY init should be executed after:
+ * 1. SDCLK frequecny changes.
+ * 2. SDCLK is stopped and re-enabled.
+ * 3. config in emmc_phy_regs->timing_adj and emmc_phy_regs->func_ctrl
+ * are changed
+ */
+static int emmc_phy_init(struct sdhci_host *host)
+{
+ u32 reg;
+ u32 wait, clock;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg |= SDHCI_PHY_INITIALIZAION;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+
+ /* Add duration of FC_SYNC_RST */
+ wait = ((reg >> SDHCI_FC_SYNC_RST_DURATION_SHIFT) &
+ SDHCI_FC_SYNC_RST_DURATION_MASK);
+ /* Add interval between FC_SYNC_EN and FC_SYNC_RST */
+ wait += ((reg >> SDHCI_FC_SYNC_RST_EN_DURATION_SHIFT) &
+ SDHCI_FC_SYNC_RST_EN_DURATION_MASK);
+ /* Add duration of asserting FC_SYNC_EN */
+ wait += ((reg >> SDHCI_FC_SYNC_EN_DURATION_SHIFT) &
+ SDHCI_FC_SYNC_EN_DURATION_MASK);
+ /* Add duration of waiting for PHY */
+ wait += ((reg >> SDHCI_WAIT_CYCLE_BEFORE_USING_SHIFT) &
+ SDHCI_WAIT_CYCLE_BEFORE_USING_MASK);
+ /* 4 addtional bus clock and 4 AXI bus clock are required */
+ wait += 8;
+ wait <<= 20;
+
+ clock = host->clock;
+ if (!clock)
+ /* Use the possibly slowest bus frequency value */
+ clock = SDHCI_LOWEST_SDCLK_FREQ;
+ /* get the wait time */
+ wait /= clock;
+ wait++;
+ /* wait for host eMMC PHY init completes */
+ udelay(wait);
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= SDHCI_PHY_INITIALIZAION;
+ if (reg) {
+ dev_err(mmc_dev(host->mmc), "eMMC PHY init cannot complete after %d us\n",
+ wait);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * Enable eMMC PHY HW DLL
+ * DLL should be enabled and stable before HS200/SDR104 tuning,
+ * and before HS400 data strobe setting.
+ */
+static int emmc_phy_enable_dll(struct sdhci_host *host)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ u8 timeout;
+
+ if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+ return -EINVAL;
+
+ reg = sdhci_readl(host, phy_regs->dll_ctrl);
+ if (reg & SDHCI_DLL_ENABLE)
+ return 0;
+
+ /* Enable DLL */
+ reg = sdhci_readl(host, phy_regs->dll_ctrl);
+ reg |= (SDHCI_DLL_ENABLE | SDHCI_DLL_FAST_LOCK);
+
+ /*
+ * Set Phase as 90 degree, which is most common value.
+ * Might set another value if necessary.
+ * The granularity is 1 degree.
+ */
+ reg &= ~((SDHCI_DLL_PHASE_MASK << SDHCI_DLL_PHSEL0_SHIFT) |
+ (SDHCI_DLL_PHASE_MASK << SDHCI_DLL_PHSEL1_SHIFT));
+ reg |= ((SDHCI_DLL_PHASE_90_DEGREE << SDHCI_DLL_PHSEL0_SHIFT) |
+ (SDHCI_DLL_PHASE_90_DEGREE << SDHCI_DLL_PHSEL1_SHIFT));
+
+ reg &= ~SDHCI_DLL_BYPASS_EN;
+ reg |= phy_regs->dll_update;
+ if (priv->phy_type == EMMC_5_1_PHY)
+ reg &= ~SDHCI_DLL_REFCLK_SEL;
+ sdhci_writel(host, reg, phy_regs->dll_ctrl);
+
+ /* Wait max 32 ms */
+ timeout = 32;
+ while (!(sdhci_readw(host, SDHCI_SLOT_EXT_PRESENT_STATE) &
+ SDHCI_DLL_LOCK_STATE)) {
+ if (!timeout) {
+ dev_err(mmc_dev(host->mmc), "Wait for DLL Lock time-out\n");
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ mdelay(1);
+ }
+ return 0;
+}
+
+/*
+ * Config to eMMC PHY to prepare for tuning.
+ * Enable HW DLL and set the TUNING_STEP
+ */
+static int emmc_phy_config_tuning(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+ u32 reg, tuning_step;
+ int ret;
+ unsigned long flags;
+
+ if (WARN_ON(host->clock <= MMC_HIGH_52_MAX_DTR))
+ return -EINVAL;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ ret = emmc_phy_enable_dll(host);
+ if (ret) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return ret;
+ }
+
+ /* Achieve TUNGING_STEP with HW DLL help */
+ reg = sdhci_readl(host, SDHCI_SLOT_DLL_CUR_DLY_VAL);
+ tuning_step = reg / params->tun_step_divider;
+ if (unlikely(tuning_step > SDHCI_TUNING_STEP_MASK)) {
+ dev_warn(mmc_dev(host->mmc),
+ "HS200 TUNING_STEP %d is larger than MAX value\n",
+ tuning_step);
+ tuning_step = SDHCI_TUNING_STEP_MASK;
+ }
+
+ /* Set TUNING_STEP for later tuning */
+ reg = sdhci_readl(host, SDHCI_SLOT_OP_STATUS_CTRL);
+ reg &= ~(SDHCI_TUN_CONSECUTIVE_TIMES_MASK <<
+ SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT);
+ reg |= (params->nr_tun_times << SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT);
+ reg &= ~(SDHCI_TUNING_STEP_MASK << SDHCI_TUNING_STEP_SHIFT);
+ reg |= (tuning_step << SDHCI_TUNING_STEP_SHIFT);
+ sdhci_writel(host, reg, SDHCI_SLOT_OP_STATUS_CTRL);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+ return 0;
+}
+
+static void __emmc_phy_disable_data_strobe(struct sdhci_host *host)
+{
+ u32 reg;
+
+ /* Disable SDHC Data Strobe */
+ reg = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+ reg &= ~SDHCI_ENABLE_DATA_STROBE;
+ sdhci_writel(host, reg, SDHCI_SLOT_EMMC_CTRL);
+}
+
+/* Set HS400 Data Strobe */
+static void emmc_phy_strobe_delay_adj(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ unsigned long flags;
+ u32 reg;
+
+ if (WARN_ON(host->timing != MMC_TIMING_MMC_HS400))
+ return;
+
+ if (host->clock <= MMC_HIGH_52_MAX_DTR)
+ return;
+
+ dev_dbg(mmc_dev(host->mmc), "starts HS400 strobe delay adjustment\n");
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ emmc_phy_enable_dll(host);
+
+ /* Enable SDHC Data Strobe */
+ reg = sdhci_readl(host, SDHCI_SLOT_EMMC_CTRL);
+ reg |= SDHCI_ENABLE_DATA_STROBE;
+ sdhci_writel(host, reg, SDHCI_SLOT_EMMC_CTRL);
+
+ /* Set Data Strobe Pull down */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+ reg |= SDHCI_EMMC5_FC_QSP_PD;
+ reg &= ~SDHCI_EMMC5_FC_QSP_PU;
+ sdhci_writel(host, reg, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, SDHCI_EMMC_PHY_PAD_CONTROL1);
+ reg |= SDHCI_EMMC5_1_FC_QSP_PD;
+ reg &= ~SDHCI_EMMC5_1_FC_QSP_PU;
+ sdhci_writel(host, reg, SDHCI_EMMC_PHY_PAD_CONTROL1);
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static inline bool temp_stage_hs200_to_hs400(struct sdhci_host *host,
+ struct sdhci_xenon_priv *priv)
+{
+ /*
+ * Tmep stages from HS200 to HS400
+ * from HS200 to HS in 200MHz
+ * from 200MHz to 52MHz
+ */
+ if (((priv->timing == MMC_TIMING_MMC_HS200) &&
+ (host->timing == MMC_TIMING_MMC_HS)) ||
+ ((host->timing == MMC_TIMING_MMC_HS) &&
+ (priv->clock > host->clock)))
+ return true;
+
+ return false;
+}
+
+static inline bool temp_stage_hs400_to_h200(struct sdhci_host *host,
+ struct sdhci_xenon_priv *priv)
+{
+ /*
+ * Temp stages from HS400 t0 HS200:
+ * from 200MHz to 52MHz in HS400
+ * from HS400 to HS DDR in 52MHz
+ * from HS DDR to HS in 52MHz
+ * from HS to HS200 in 52MHz
+ */
+ if (((priv->timing == MMC_TIMING_MMC_HS400) &&
+ ((host->clock == MMC_HIGH_52_MAX_DTR) ||
+ (host->timing == MMC_TIMING_MMC_DDR52))) ||
+ ((priv->timing == MMC_TIMING_MMC_DDR52) &&
+ (host->timing == MMC_TIMING_MMC_HS)) ||
+ ((host->timing == MMC_TIMING_MMC_HS200) &&
+ (host->clock == MMC_HIGH_52_MAX_DTR)))
+ return true;
+
+ return false;
+}
+
+/*
+ * If eMMC PHY Slow Mode is required in lower speed mode in SDR mode
+ * (SDLCK < 55MHz), enable Slow Mode to bypass eMMC PHY.
+ * SDIO slower SDR mode also requires Slow Mode.
+ *
+ * If Slow Mode is enabled, return true.
+ * Otherwise, return false.
+ */
+static bool emmc_phy_slow_mode(struct sdhci_host *host,
+ unsigned char timing)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ u32 reg;
+
+ /* Skip temp stages from HS200 to HS400 */
+ if (temp_stage_hs200_to_hs400(host, priv))
+ return false;
+
+ /* Skip temp stages from HS400 t0 HS200 */
+ if (temp_stage_hs400_to_h200(host, priv))
+ return false;
+
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ /* Enable Slow Mode for SDIO in slower SDR mode */
+ if ((priv->init_card_type == MMC_TYPE_SDIO) &&
+ ((timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_UHS_SDR12) ||
+ (timing == MMC_TIMING_SD_HS) ||
+ (timing == MMC_TIMING_LEGACY))) {
+ reg |= SDHCI_TIMING_ADJUST_SLOW_MODE;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ return true;
+ }
+
+ /* Check if Slow Mode is required in lower speed mode in SDR mode */
+ if (((timing == MMC_TIMING_UHS_SDR50) ||
+ (timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_UHS_SDR12) ||
+ (timing == MMC_TIMING_SD_HS) ||
+ (timing == MMC_TIMING_MMC_HS) ||
+ (timing == MMC_TIMING_LEGACY)) && params->slow_mode) {
+ reg |= SDHCI_TIMING_ADJUST_SLOW_MODE;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ return true;
+ }
+
+ reg &= ~SDHCI_TIMING_ADJUST_SLOW_MODE;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ return false;
+}
+
+/*
+ * Set-up eMMC 5.0/5.1 PHY.
+ * Specific onfiguration depends on the current speed mode in use.
+ */
+static void emmc_phy_set(struct sdhci_host *host,
+ unsigned char timing)
+{
+ u32 reg;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct emmc_phy_params *params = priv->phy_params;
+ struct xenon_emmc_phy_regs *phy_regs = priv->emmc_phy_regs;
+ unsigned long flags;
+
+ dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting starts\n");
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ reg = sdhci_readl(host, SDHCI_SYS_EXT_OP_CTRL);
+ reg |= SDHCI_MASK_CMD_CONFLICT_ERROR;
+ sdhci_writel(host, reg, SDHCI_SYS_EXT_OP_CTRL);
+
+ /* Setup pad, set bit[28] and bits[26:24] */
+ reg = sdhci_readl(host, phy_regs->pad_ctrl);
+ reg |= (SDHCI_FC_DQ_RECEN | SDHCI_FC_CMD_RECEN |
+ SDHCI_FC_QSP_RECEN | SDHCI_OEN_QSN);
+ /* All FC_XX_RECEIVCE should be set as CMOS Type */
+ reg |= SDHCI_FC_ALL_CMOS_RECEIVER;
+ sdhci_writel(host, reg, phy_regs->pad_ctrl);
+
+ /* Set CMD and DQ Pull Up */
+ if (priv->phy_type == EMMC_5_0_PHY) {
+ reg = sdhci_readl(host, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+ reg |= (SDHCI_EMMC5_FC_CMD_PU | SDHCI_EMMC5_FC_DQ_PU);
+ reg &= ~(SDHCI_EMMC5_FC_CMD_PD | SDHCI_EMMC5_FC_DQ_PD);
+ sdhci_writel(host, reg, SDHCI_EMMC_5_0_PHY_PAD_CONTROL);
+ } else {
+ reg = sdhci_readl(host, SDHCI_EMMC_PHY_PAD_CONTROL1);
+ reg |= (SDHCI_EMMC5_1_FC_CMD_PU | SDHCI_EMMC5_1_FC_DQ_PU);
+ reg &= ~(SDHCI_EMMC5_1_FC_CMD_PD | SDHCI_EMMC5_1_FC_DQ_PD);
+ sdhci_writel(host, reg, SDHCI_EMMC_PHY_PAD_CONTROL1);
+ }
+
+ if (timing == MMC_TIMING_LEGACY)
+ goto phy_init;
+
+ /*
+ * FIXME: should depends on the specific board timing.
+ */
+ if ((timing == MMC_TIMING_MMC_HS400) ||
+ (timing == MMC_TIMING_MMC_HS200) ||
+ (timing == MMC_TIMING_UHS_SDR50) ||
+ (timing == MMC_TIMING_UHS_SDR104) ||
+ (timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_UHS_SDR25) ||
+ (timing == MMC_TIMING_MMC_DDR52)) {
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ reg &= ~SDHCI_OUTPUT_QSN_PHASE_SELECT;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+ }
+
+ /*
+ * If SDIO card, set SDIO Mode
+ * Otherwise, clear SDIO Mode
+ */
+ reg = sdhci_readl(host, phy_regs->timing_adj);
+ if (priv->init_card_type == MMC_TYPE_SDIO)
+ reg |= SDHCI_TIMING_ADJUST_SDIO_MODE;
+ else
+ reg &= ~SDHCI_TIMING_ADJUST_SDIO_MODE;
+ sdhci_writel(host, reg, phy_regs->timing_adj);
+
+ if (emmc_phy_slow_mode(host, timing))
+ goto phy_init;
+
+ /*
+ * Set preferred ZNR and ZPR value
+ * The ZNR and ZPR value vary between different boards.
+ * Define them both in sdhci-xenon-emmc-phy.h.
+ */
+ reg = sdhci_readl(host, phy_regs->pad_ctrl2);
+ reg &= ~((SDHCI_ZNR_MASK << SDHCI_ZNR_SHIFT) | SDHCI_ZPR_MASK);
+ reg |= ((params->znr << SDHCI_ZNR_SHIFT) | params->zpr);
+ sdhci_writel(host, reg, phy_regs->pad_ctrl2);
+
+ /*
+ * When setting EMMC_PHY_FUNC_CONTROL register,
+ * SD clock should be disabled
+ */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg &= ~SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ reg = sdhci_readl(host, phy_regs->func_ctrl);
+ if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_HS400) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ reg |= (SDHCI_DQ_DDR_MODE_MASK << SDHCI_DQ_DDR_MODE_SHIFT) |
+ SDHCI_CMD_DDR_MODE;
+ else
+ reg &= ~((SDHCI_DQ_DDR_MODE_MASK << SDHCI_DQ_DDR_MODE_SHIFT) |
+ SDHCI_CMD_DDR_MODE);
+
+ if (timing == MMC_TIMING_MMC_HS400)
+ reg &= ~SDHCI_DQ_ASYNC_MODE;
+ else
+ reg |= SDHCI_DQ_ASYNC_MODE;
+ sdhci_writel(host, reg, phy_regs->func_ctrl);
+
+ /* Enable bus clock */
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg |= SDHCI_CLOCK_CARD_EN;
+ sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+ if (timing == MMC_TIMING_MMC_HS400)
+ /* Hardware team recommend a value for HS400 */
+ sdhci_writel(host, SDHCI_LOGIC_TIMING_VALUE,
+ phy_regs->logic_timing_adj);
+ else
+ __emmc_phy_disable_data_strobe(host);
+
+phy_init:
+ emmc_phy_init(host);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ dev_dbg(mmc_dev(host->mmc), "eMMC PHY setting completes\n");
+}
+
+static int emmc_phy_parse_param_dt(struct sdhci_host *host,
+ struct device_node *np,
+ struct emmc_phy_params *params)
+{
+ u32 value;
+
+ if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+ params->slow_mode = true;
+ else
+ params->slow_mode = false;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+ params->znr = value & SDHCI_ZNR_MASK;
+ else
+ params->znr = SDHCI_ZNR_DEF_VALUE;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+ params->zpr = value & SDHCI_ZPR_MASK;
+ else
+ params->zpr = SDHCI_ZPR_DEF_VALUE;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
+ &value))
+ params->nr_tun_times = value & SDHCI_TUN_CONSECUTIVE_TIMES_MASK;
+ else
+ params->nr_tun_times = SDHCI_TUN_CONSECUTIVE_TIMES;
+
+ if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
+ &value))
+ params->tun_step_divider = value & 0xFF;
+ else
+ params->tun_step_divider = SDHCI_TUNING_STEP_DIVIDER;
+
+ return 0;
+}
+
+/*
+ * Setting PHY when card is working in High Speed Mode.
+ * HS400 set data strobe line.
+ * HS200/SDR104 set tuning config to prepare for tuning.
+ */
+static int xenon_hs_delay_adj(struct sdhci_host *host)
+{
+ int ret = 0;
+
+ if (WARN_ON(host->clock <= SDHCI_DEFAULT_SDCLK_FREQ))
+ return -EINVAL;
+
+ if (host->timing == MMC_TIMING_MMC_HS400) {
+ emmc_phy_strobe_delay_adj(host);
+ return 0;
+ }
+
+ if ((host->timing == MMC_TIMING_MMC_HS200) ||
+ (host->timing == MMC_TIMING_UHS_SDR104)) {
+ ret = emmc_phy_config_tuning(host);
+ if (!ret)
+ return 0;
+ }
+
+ /*
+ * DDR Mode requires driver to scan Sampling Fixed Delay Line,
+ * to find out a perfect operation sampling point.
+ * It is hard to implement such a scan in host driver since initiating
+ * commands by host driver is not safe.
+ * Thus so far just keep PHY Sampling Fixed Delay in default value
+ * in DDR mode.
+ *
+ * If any timing issue occrus in DDR mode on Marvell products,
+ * please contact maintainer to ask for internal support in Marvell.
+ */
+ if ((host->timing == MMC_TIMING_MMC_DDR52) ||
+ (host->timing == MMC_TIMING_UHS_DDR50))
+ dev_warn(mmc_dev(host->mmc), "Timing issue might occur in DDR mode\n");
+ return ret;
+}
+
+/*
+ * Adjust PHY setting.
+ * PHY setting should be adjusted when SDCLK frequency, Bus Width
+ * or Speed Mode is changed.
+ * Addtional config are required when card is working in High Speed mode,
+ * after leaving Legacy Mode.
+ */
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int ret = 0;
+
+ if (!host->clock) {
+ priv->clock = 0;
+ return 0;
+ }
+
+ /*
+ * The timing, frequency or bus width is changed,
+ * better to set eMMC PHY based on current setting
+ * and adjust Xenon SDHC delay.
+ */
+ if ((host->clock == priv->clock) &&
+ (ios->bus_width == priv->bus_width) &&
+ (ios->timing == priv->timing))
+ return 0;
+
+ emmc_phy_set(host, ios->timing);
+
+ /* Update the record */
+ priv->bus_width = ios->bus_width;
+
+ /* Skip temp stages from HS200 to HS400 */
+ if (temp_stage_hs200_to_hs400(host, priv))
+ return 0;
+
+ /* Skip temp stages from HS400 t0 HS200 */
+ if (temp_stage_hs400_to_h200(host, priv))
+ return 0;
+
+ priv->timing = ios->timing;
+ priv->clock = host->clock;
+
+ /* Legacy mode is a special case */
+ if (ios->timing == MMC_TIMING_LEGACY)
+ return 0;
+
+ if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ)
+ ret = xenon_hs_delay_adj(host);
+ return ret;
+}
+
+static int add_xenon_phy(struct device_node *np, struct sdhci_host *host,
+ const char *phy_name)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int i, ret;
+
+ for (i = 0; i < NR_PHY_TYPES; i++) {
+ if (!strcmp(phy_name, phy_types[i])) {
+ priv->phy_type = i;
+ break;
+ }
+ }
+ if (i == NR_PHY_TYPES) {
+ dev_err(mmc_dev(host->mmc),
+ "Unable to determine PHY name %s. Use default eMMC 5.1 PHY\n",
+ phy_name);
+ priv->phy_type = EMMC_5_1_PHY;
+ }
+
+ ret = alloc_emmc_phy(priv);
+ if (ret)
+ return ret;
+
+ return emmc_phy_parse_param_dt(host, np, priv->phy_params);
+}
+
+int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+{
+ const char *phy_type = NULL;
+
+ if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
+ return add_xenon_phy(np, host, phy_type);
+
+ dev_info(mmc_dev(host->mmc), "Fail to get Xenon PHY type. Use default eMMC 5.1 PHY\n");
+ return add_xenon_phy(np, host, "emmc 5.1 phy");
+}
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index c71439fbc308..0347de533777 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -244,6 +244,7 @@ static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_unlock_irqrestore(&host->lock, flags);
sdhci_set_ios(mmc, ios);
+ xenon_phy_adj(host, ios);
if (host->clock > SDHCI_DEFAULT_SDCLK_FREQ) {
spin_lock_irqsave(&host->lock, flags);
@@ -481,7 +482,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
}
priv->tuning_count = tuning_count;
- return err;
+ return xenon_phy_parse_dt(np, host);
}
static int xenon_sdhc_probe(struct sdhci_host *host)
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index d50cd663a265..86b5d2b1f1aa 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -23,8 +23,19 @@
#define SDHCI_SLOT_ENABLE_SHIFT 0
#define SDHCI_SYS_EXT_OP_CTRL 0x010C
+#define SDHCI_MASK_CMD_CONFLICT_ERROR BIT(8)
+
+#define SDHCI_SLOT_OP_STATUS_CTRL 0x0128
+
+#define SDHCI_TUN_CONSECUTIVE_TIMES_SHIFT 16
+#define SDHCI_TUN_CONSECUTIVE_TIMES_MASK 0x7
+#define SDHCI_TUN_CONSECUTIVE_TIMES 0x4
+#define SDHCI_TUNING_STEP_SHIFT 12
+#define SDHCI_TUNING_STEP_MASK 0xF
+#define SDHCI_TUNING_STEP_DIVIDER BIT(6)
#define SDHCI_SLOT_EMMC_CTRL 0x0130
+#define SDHCI_ENABLE_DATA_STROBE BIT(24)
#define SDHCI_EMMC_VCCQ_MASK 0x3
#define SDHCI_EMMC_VCCQ_1_8V 0x1
#define SDHCI_EMMC_VCCQ_3_3V 0x3
@@ -33,11 +44,17 @@
/* retuning compatible */
#define SDHCI_RETUNING_COMPATIBLE 0x1
+#define SDHCI_SLOT_EXT_PRESENT_STATE 0x014C
+#define SDHCI_DLL_LOCK_STATE 0x1
+
+#define SDHCI_SLOT_DLL_CUR_DLY_VAL 0x0150
+
/* Tuning Parameter */
#define SDHCI_TMR_RETUN_NO_PRESENT 0xF
#define SDHCI_DEF_TUNING_COUNT 0x9
#define SDHCI_DEFAULT_SDCLK_FREQ (400000)
+#define SDHCI_LOWEST_SDCLK_FREQ (100000)
/* Xenon specific Mode Select value */
#define SDHCI_XENON_CTRL_HS200 0x5
@@ -65,6 +82,28 @@ struct sdhci_xenon_priv {
* initialization completes.
*/
unsigned int init_card_type;
+
+ /*
+ * The bus_width, timing, and clock fields in below
+ * record the current ios setting of Xenon SDHC.
+ * Driver will adjust PHY setting if any change to
+ * ios affects PHY timing.
+ */
+ unsigned char bus_width;
+ unsigned char timing;
+ unsigned int clock;
+
+ int phy_type;
+ /*
+ * Contains board-specific PHY parameters
+ * passed from device tree.
+ */
+ void *phy_params;
+ struct xenon_emmc_phy_regs *emmc_phy_regs;
};
+
+int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
+int xenon_phy_parse_dt(struct device_node *np,
+ struct sdhci_host *host);
#endif
--
git-series 0.9.1
More information about the linux-arm-kernel
mailing list