[PATCH v4 02/12] mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
Gregory CLEMENT
gregory.clement at free-electrons.com
Tue Dec 13 09:48:31 PST 2016
From: Hu Ziji <huziji at marvell.com>
Export sdhci_start_signal_voltage_switch() from sdhci.c.
Thus vendor sdhci driver can implement its own signal voltage
switch routine.
Signed-off-by: Hu Ziji <huziji at marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
drivers/mmc/host/sdhci.c | 5 +++--
drivers/mmc/host/sdhci.h | 2 ++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ea06faf8a437..8e6e4e37e3b4 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1832,8 +1832,8 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
spin_unlock_irqrestore(&host->lock, flags);
}
-static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
- struct mmc_ios *ios)
+int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
{
struct sdhci_host *host = mmc_priv(mmc);
u16 ctrl;
@@ -1925,6 +1925,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
return 0;
}
}
+EXPORT_SYMBOL_GPL(sdhci_start_signal_voltage_switch);
static int sdhci_card_busy(struct mmc_host *mmc)
{
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 37771de4cafa..cd18b6f19c3b 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -689,6 +689,8 @@ void sdhci_set_bus_width(struct sdhci_host *host, int width);
void sdhci_reset(struct sdhci_host *host, u8 mask);
void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing);
void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios);
+int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios);
#ifdef CONFIG_PM
extern int sdhci_suspend_host(struct sdhci_host *host);
--
git-series 0.9.1
More information about the linux-arm-kernel
mailing list