[PATCH V7 4/8] common: DMA-mapping: add DMA_ATTR_PRIVILEGED attribute
Robin Murphy
robin.murphy at arm.com
Tue Dec 13 05:55:46 PST 2016
On 12/12/16 18:38, Sricharan R wrote:
> From: Mitchel Humpherys <mitchelh at codeaurora.org>
>
> This patch adds the DMA_ATTR_PRIVILEGED attribute to the DMA-mapping
> subsystem.
>
> Some advanced peripherals such as remote processors and GPUs perform
> accesses to DMA buffers in both privileged "supervisor" and unprivileged
> "user" modes. This attribute is used to indicate to the DMA-mapping
> subsystem that the buffer is fully accessible at the elevated privilege
> level (and ideally inaccessible or at least read-only at the
> lesser-privileged levels).
>
> Cc: linux-doc at vger.kernel.org
> Reviewed-by: Robin Murphy <robin.murphy at arm.com>
> Tested-by: Robin Murphy <robin.murphy at arm.com>
> Acked-by: Will Deacon <will.deacon at arm.com>
> Signed-off-by: Mitchel Humpherys <mitchelh at codeaurora.org>
> ---
> Documentation/DMA-attributes.txt | 10 ++++++++++
> include/linux/dma-mapping.h | 7 +++++++
> 2 files changed, 17 insertions(+)
>
> diff --git a/Documentation/DMA-attributes.txt b/Documentation/DMA-attributes.txt
> index 98bf7ac..44c6bc4 100644
> --- a/Documentation/DMA-attributes.txt
> +++ b/Documentation/DMA-attributes.txt
> @@ -143,3 +143,13 @@ So, this provides a way for drivers to avoid those error messages on calls
> where allocation failures are not a problem, and shouldn't bother the logs.
>
> NOTE: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.
> +
> +DMA_ATTR_PRIVILEGED
> +------------------------------
> +
> +Some advanced peripherals such as remote processors and GPUs perform
> +accesses to DMA buffers in both privileged "supervisor" and unprivileged
> +"user" modes. This attribute is used to indicate to the DMA-mapping
> +subsystem that the buffer is fully accessible at the elevated privilege
> +level (and ideally inaccessible or at least read-only at the
> +lesser-privileged levels).
> diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
> index 6f3e6ca..ee31ea1 100644
> --- a/include/linux/dma-mapping.h
> +++ b/include/linux/dma-mapping.h
> @@ -63,6 +63,13 @@
> #define DMA_ATTR_NO_WARN (1UL << 8)
>
> /*
> + * DMA_ATTR_PRIVILEGED: used to indicate that the buffer is fully
> + * accessible at an elevated privilege level (and ideally inaccessible or
> + * at least read-only at lesser-privileged levels).
> + */
> +#define DMA_ATTR_PRIVILEGED (1UL << 8)
Oops, I spoke slightly too soon - there's a value conflict here which
has been missed in the rebase.
Robin
> +
> +/*
> * A dma_addr_t can hold any valid DMA or bus address for the platform.
> * It can be given to a device to use as a DMA source or target. A CPU cannot
> * reference a dma_addr_t directly because there may be translation between
>
More information about the linux-arm-kernel
mailing list