[PATCH v3 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K

[Gregory CLEMENT]

Hi Russell King,
 
 On ven., déc. 09 2016, Russell King - ARM Linux <linux at armlinux.org.uk> wrote:

> On Fri, Dec 09, 2016 at 11:30:07AM +0100, Gregory CLEMENT wrote:
>> Also enable it on the Armada 7040 DB board
>> 
>> Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
>
> Hi,
>
> Can this also be added to the cp110 on the 7k/8k SoCs as well, or does
> it rely on other unmerged support?

I did not add this one because until now I had not the hardware setup
available to test it.

But at least I can add the ressources in the device tree and now I can
test it partially.

Gregory

>
> Thanks.
>
> -- 
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com