[PATCH v6 5/5] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc
Bartosz Golaszewski
bgolaszewski at baylibre.com
Mon Dec 12 05:05:42 PST 2016
At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
is 37.5 MHz[1]. We must filter out any mode for which the calculated
pixel clock rate would exceed this value.
Specify the max-pixelclock property for the display node for
da850-lcdk.
[1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques
Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
arch/arm/boot/dts/da850.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 3f51e59..ba5bf80 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -452,6 +452,7 @@
compatible = "ti,da850-tilcdc";
reg = <0x213000 0x1000>;
interrupts = <52>;
+ max-pixelclock = <37500>;
status = "disabled";
};
};
--
2.9.3
More information about the linux-arm-kernel
mailing list