[PATCH 3/8] rtc: add STM32 RTC driver
Amelie DELAUNAY
amelie.delaunay at st.com
Mon Dec 12 02:19:36 PST 2016
Hi,
Thanks for the review.
On 12/07/2016 08:08 PM, Alexandre Belloni wrote:
> Hi,
>
> It seems mostly fine.
>
> On 02/12/2016 at 15:09:56 +0100, Amelie Delaunay wrote :
>> This patch adds support for the STM32 RTC.
>>
>> Signed-off-by: Amelie Delaunay <amelie.delaunay at st.com>
>> ---
>> drivers/rtc/Kconfig | 10 +
>> drivers/rtc/Makefile | 1 +
>> drivers/rtc/rtc-stm32.c | 777 ++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 788 insertions(+)
>> create mode 100644 drivers/rtc/rtc-stm32.c
>>
>> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
>> index e859d14..dd8b218 100644
>> --- a/drivers/rtc/Kconfig
>> +++ b/drivers/rtc/Kconfig
>> @@ -1706,6 +1706,16 @@ config RTC_DRV_PIC32
>> This driver can also be built as a module. If so, the module
>> will be called rtc-pic32
>>
>> +config RTC_DRV_STM32
>> + tristate "STM32 On-Chip RTC"
>> + depends on ARCH_STM32
>
> Can you add COMPILE_TEST? Looking at it, nothing seemed to be
> architecture specific and this nicely increases compile test coverage.
>
> It should also probably select REGMAP_MMIO.
>
Ok.
>> diff --git a/drivers/rtc/rtc-stm32.c b/drivers/rtc/rtc-stm32.c
>> new file mode 100644
>> index 0000000..9e710ff
>> --- /dev/null
>> +++ b/drivers/rtc/rtc-stm32.c
>> @@ -0,0 +1,777 @@
>> +/*
>> + * Copyright (C) Amelie Delaunay 2015
>> + * Author: Amelie Delaunay <adelaunay.stm32 at gmail.com>
>
> This differs from your SoB. I don't really care but it seems odd.
>
Yes, I've already changed it in my upcoming V2!
>> + * License terms: GNU General Public License (GPL), version 2
>> + */
>> +
>> +#include <linux/bcd.h>
>> +#include <linux/clk.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/ioport.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regmap.h>
>> +#include <linux/rtc.h>
>> +#include <linux/spinlock.h>
>> +
>
> I have the feeling that some of those headers are not necessary maybe
> some cleanup should be done.
>
Ok I'll have a look.
>> +static struct regmap *dbp;
>> +
>> +struct stm32_rtc {
>> + struct rtc_device *rtc_dev;
>> + void __iomem *base;
>> + struct clk *pclk;
>> + struct clk *ck_rtc;
>> + unsigned int clksrc;
>> + spinlock_t lock; /* Protects registers accesses */
>
> That comment makes checkpatch happy but is not super useful :) Anyway...
>
Lack of inspiration :)
>> +static irqreturn_t stm32_rtc_alarm_irq(int irq, void *dev_id)
>> +{
>
> ...can you make that one a threaded IRQ? If that's the case, just take
> the rtc_device mutex here and remove the spinlock. All the other
> function are already protected.
>
Ok I'll study this point.
>> +static int stm32_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
>> +{
>> + struct stm32_rtc *rtc = dev_get_drvdata(dev);
>> + struct rtc_time *tm = &alrm->time;
>> + unsigned int alrmar, cr, isr;
>> + unsigned long irqflags;
>> +
>> + spin_lock_irqsave(&rtc->lock, irqflags);
>> +
>> + alrmar = stm32_rtc_readl(rtc, STM32_RTC_ALRMAR);
>> + cr = stm32_rtc_readl(rtc, STM32_RTC_CR);
>> + isr = stm32_rtc_readl(rtc, STM32_RTC_ISR);
>> +
>> + spin_unlock_irqrestore(&rtc->lock, irqflags);
>> +
>> + if (alrmar & STM32_RTC_ALRMXR_DATE_MASK) {
>> + /*
>> + * Date/day don't care in Alarm comparison so alarm triggers
>
> I guess you meant "doesn't matter" (that is also valid for the other
> usages of "don't care".
>
>> + * every day
>> + */
>> + tm->tm_mday = -1;
>> + tm->tm_wday = -1;
>> + } else {
>> + if (alrmar & STM32_RTC_ALRMXR_WDSEL) {
>> + /* Alarm is set to a day of week */
>> + tm->tm_mday = -1;
>> + tm->tm_wday = (alrmar & STM32_RTC_ALRMXR_WDAY) >>
>> + STM32_RTC_ALRMXR_WDAY_SHIFT;
>> + tm->tm_wday %= 7;
>> + } else {
>> + /* Alarm is set to a day of month */
>> + tm->tm_wday = -1;
>> + tm->tm_mday = (alrmar & STM32_RTC_ALRMXR_DATE) >>
>> + STM32_RTC_ALRMXR_DATE_SHIFT;
>> + }
>> + }
>> +
>> + if (alrmar & STM32_RTC_ALRMXR_HOUR_MASK) {
>> + /* Hours don't care in Alarm comparison */
>> + tm->tm_hour = -1;
>> + } else {
>> + tm->tm_hour = (alrmar & STM32_RTC_ALRMXR_HOUR) >>
>> + STM32_RTC_ALRMXR_HOUR_SHIFT;
>> + if (alrmar & STM32_RTC_ALRMXR_PM)
>> + tm->tm_hour += 12;
>> + }
>> +
>> + if (alrmar & STM32_RTC_ALRMXR_MIN_MASK) {
>> + /* Minutes don't care in Alarm comparison */
>> + tm->tm_min = -1;
>> + } else {
>> + tm->tm_min = (alrmar & STM32_RTC_ALRMXR_MIN) >>
>> + STM32_RTC_ALRMXR_MIN_SHIFT;
>> + }
>> +
>> + if (alrmar & STM32_RTC_ALRMXR_SEC_MASK) {
>> + /* Seconds don't care in Alarm comparison */
>> + tm->tm_sec = -1;
>> + } else {
>> + tm->tm_sec = (alrmar & STM32_RTC_ALRMXR_SEC) >>
>> + STM32_RTC_ALRMXR_SEC_SHIFT;
>> + }
>> +
> I'm not sure those multiple cases (including STM32_RTC_ALRMXR_WDSEL) are
> useful because the core will always give you valid tm_sec, tm_min,
> tm_hour and tm_mday (it is actually checked up to four times!) so you
> should always end up in the same configuration.
>
> If you think some code other than Linux may set an alarm (e.g. the
> bootloader) then you may keep them in read_alarm but at least you can
> remove them from set_alarm.
>
>
Ok I'll clean this part.
>> +static int stm32_rtc_probe(struct platform_device *pdev)
>> +{
>> + struct stm32_rtc *rtc;
>> + struct resource *res;
>> + int ret;
>> +
>> + rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
>> + if (!rtc)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + rtc->base = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(rtc->base))
>> + return PTR_ERR(rtc->base);
>> +
>> + dbp = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "st,syscfg");
>> + if (IS_ERR(dbp)) {
>> + dev_err(&pdev->dev, "no st,syscfg\n");
>> + return PTR_ERR(dbp);
>> + }
>> +
>> + spin_lock_init(&rtc->lock);
>> +
>> + rtc->ck_rtc = devm_clk_get(&pdev->dev, "ck_rtc");
>> + if (IS_ERR(rtc->ck_rtc)) {
>> + dev_err(&pdev->dev, "no ck_rtc clock");
>> + return PTR_ERR(rtc->ck_rtc);
>> + }
>> +
>> + ret = clk_prepare_enable(rtc->ck_rtc);
>> + if (ret)
>> + return ret;
>> +
>> + if (dbp)
>> + regmap_update_bits(dbp, PWR_CR, PWR_CR_DBP, PWR_CR_DBP);
>> +
>> + ret = stm32_rtc_init(pdev, rtc);
>> + if (ret)
>> + goto err;
>> +
>
> Isn't that RTC backuped in some way, do you really need to reinit it
> each time the system reboots?
>
>
Indeed, RTC is backuped. I need to reinit it only if RTC parent clock
has changed.
Best Regards,
Amelie
More information about the linux-arm-kernel
mailing list