[PATCH v6 1/8] MFD: add bindings for STM32 Timers driver
Lee Jones
lee.jones at linaro.org
Sun Dec 11 23:46:54 PST 2016
On Fri, 09 Dec 2016, Benjamin Gaignard wrote:
> Add bindings information for STM32 Timers
>
> version 6:
> - rename stm32-gtimer to stm32-timers
> - change compatible
> - add description about the IPs
>
> version 2:
> - rename stm32-mfd-timer to stm32-gptimer
> - only keep one compatible string
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
> ---
> .../devicetree/bindings/mfd/stm32-timers.txt | 46 ++++++++++++++++++++++
> 1 file changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/stm32-timers.txt
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones at linaro.org>
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-timers.txt b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> new file mode 100644
> index 0000000..b30868e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-timers.txt
> @@ -0,0 +1,46 @@
> +STM32 Timers driver bindings
> +
> +This IP provides 3 types of timer along with PWM functionality:
> +- advanced-control timers consist of a 16-bit auto-reload counter driven by a programmable
> + prescaler, break input feature, PWM outputs and complementary PWM ouputs channels.
> +- general-purpose timers consist of a 16-bit or 32-bit auto-reload counter driven by a
> + programmable prescaler and PWM outputs.
> +- basic timers consist of a 16-bit auto-reload counter driven by a programmable prescaler.
> +
> +Required parameters:
> +- compatible: must be "st,stm32-timers"
> +
> +- reg: Physical base address and length of the controller's
> + registers.
> +- clock-names: Set to "clk_int".
> +- clocks: Phandle to the clock used by the timer module.
> + For Clk properties, please refer to ../clock/clock-bindings.txt
> +
> +Optional parameters:
> +- resets: Phandle to the parent reset controller.
> + See ../reset/st,stm32-rcc.txt
> +
> +Optional subnodes:
> +- pwm: See ../pwm/pwm-stm32.txt
> +- timer: See ../iio/timer/stm32-timer-trigger.txt
> +
> +Example:
> + timers at 40010000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "st,stm32-timers";
> + reg = <0x40010000 0x400>;
> + clocks = <&rcc 0 160>;
> + clock-names = "clk_int";
> +
> + pwm {
> + compatible = "st,stm32-pwm";
> + pinctrl-0 = <&pwm1_pins>;
> + pinctrl-names = "default";
> + };
> +
> + timer {
> + compatible = "st,stm32-timer-trigger";
> + reg = <0>;
> + };
> + };
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the linux-arm-kernel
mailing list