[PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll

[Jacky Bai]

> Subject: Re: [PATCH 10/11] Document: dt: binding: imx: update doc for imx6sll
> 
> On 12/02, Bai Ping wrote:
> > Add necessary document update for i.MX6SLL support.
> >
> > Signed-off-by: Bai Ping <ping.bai at nxp.com>
> > ---
> >  .../devicetree/bindings/clock/imx6sll-clock.txt    | 13 ++++++++
> >  .../bindings/pinctrl/fsl,imx6sll-pinctrl.txt       | 37 ++++++++++++++++++++++
> 
> Please split the bindings into different patches and put them closer to the
> drivers that use them in the series.

Ok, I will fix it in V2.

> 
> >  2 files changed, 50 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/pinctrl/fsl,imx6sll-pinctrl.txt
> >
> > diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > new file mode 100644
> > index 0000000..4f52efa
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> > @@ -0,0 +1,13 @@
> > +* Clock bindings for Freescale i.MX6 UltraLite
> > +
> > +Required properties:
> > +- compatible: Should be "fsl,imx6sll-ccm"
> > +- reg: Address and length of the register set
> > +- #clock-cells: Should be <1>
> > +- clocks: list of clock specifiers, must contain an entry for each
> > +required
> > +  entry in clock-names
> > +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> > +
> > +The clock consumer should specify the desired clock by having the
> > +clock ID in its "clocks" phandle cell.  See
> > +include/dt-bindings/clock/imx6sll-clock.h
> > +for the full list of i.MX6 SLL clock IDs.
> 
> Can you add an example node here?
> 

Thanks for review, I will add it in V2. 

> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux
> Foundation Collaborative Project