[PATCH v5 1/7] MFD: add bindings for STM32 General Purpose Timer driver

[Lee Jones]

Sorry to do this Ben.  Not much to do now though!

> Add bindings information for STM32 General Purpose Timer
> 
> version 2:
> - rename stm32-mfd-timer to stm32-gptimer
> - only keep one compatible string
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
> ---
>  .../bindings/mfd/stm32-general-purpose-timer.txt   | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> new file mode 100644
> index 0000000..ce67755
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
> @@ -0,0 +1,39 @@
> +STM32 General Purpose Timer driver bindings

This is a great place to describe what we're *actually* trying to
achieve with this driver, and the worst place to use the term "general
purpose", since this IP is so much more than that.


"STM32 Timers

This IP provides 3 types of timer along with PWM functionality.

[...]"

... then go on to explain what the 3 types are and how they can be
used.

> +Required parameters:
> +- compatible: must be "st,stm32-gptimer"

I vehemently disagree that this entire IP is a GP Timer.  It contains
GP timers, sure, but it also contains Advanced and Basic timers.

IMHO this compatible should be "st,stm32-timers".

And the file name of both this and the *.c file should reflect that
too.

Remainder looks nice.

> +- reg:			Physical base address and length of the controller's
> +			registers.
> +- clock-names: 		Set to "clk_int".
> +- clocks: 		Phandle to the clock used by the timer module.
> +			For Clk properties, please refer to ../clock/clock-bindings.txt
> +
> +Optional parameters:
> +- resets:		Phandle to the parent reset controller.
> +			See ../reset/st,stm32-rcc.txt
> +
> +Optional subnodes:
> +- pwm:			See ../pwm/pwm-stm32.txt
> +- timer:		See ../iio/timer/stm32-timer-trigger.txt
> +
> +Example:
> +	timers at 40010000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "st,stm32-gptimer";
> +		reg = <0x40010000 0x400>;
> +		clocks = <&rcc 0 160>;
> +		clock-names = "clk_int";
> +
> +		pwm at 0 {

Out of interest, do you use the "@0", "@1" for anything now?

> +			compatible = "st,stm32-pwm";
> +			pinctrl-0	= <&pwm1_pins>;
> +			pinctrl-names	= "default";
> +		};
> +
> +		timer at 0 {
> +			compatible = "st,stm32-timer-trigger";
> +			reg = <0>;
> +		};
> +	};

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog