[PATCH V2 2/5] ARM: BCM5301X: Specify USB controllers in DT

[Ray Jui]

On 12/6/2016 11:56 PM, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal at milecki.pl>
> 
> There are 3 separated controllers, one per USB /standard/. With PHY
> drivers in place they can be simply supported with generic drivers.
> 
> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
> ---
> V2: Fix node names and reorder ehci with ohci. Thanks Ray!
> ---
>  arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
>  1 file changed, 32 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
> index f09a2bb..a4614c9 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -248,8 +248,26 @@
>  
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> +			ranges;
>  
> -			phys = <&usb2_phy>;
> +			interrupt-parent = <&gic>;
> +
> +			ehci: ehci at 21000 {
> +				#usb-cells = <0>;
> +
> +				compatible = "generic-ehci";
> +				reg = <0x00021000 0x1000>;
> +				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb2_phy>;
> +			};
> +
> +			ohci: ohci at 22000 {
> +				#usb-cells = <0>;
> +
> +				compatible = "generic-ohci";
> +				reg = <0x00022000 0x1000>;
> +				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> +			};
>  		};
>  
>  		usb3: usb3 at 23000 {
> @@ -257,6 +275,19 @@
>  
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> +			ranges;
> +
> +			interrupt-parent = <&gic>;
> +
> +			xhci: xhci at 23000 {
> +				#usb-cells = <0>;
> +
> +				compatible = "generic-xhci";
> +				reg = <0x00023000 0x1000>;
> +				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb3_phy>;
> +				phy-names = "usb";
> +			};
>  		};
>  
>  		spi at 29000 {
> 

Looks good to me! Thanks!

Reviewed-by: Ray Jui <ray.jui at broadcom.com>