[PATCH v3 1/3] soc: zte: pm_domains: Prepare for supporting ARMv8 2967 family
Shawn Guo
shawnguo at kernel.org
Wed Dec 7 04:41:32 PST 2016
On Wed, Dec 07, 2016 at 02:13:22PM +0800, Baoyou Xie wrote:
> The ARMv8 2967 family (296718, 296716 etc) uses different value
> for controlling the power domain on/off registers, Choose the
> value depending on the compatible.
>
> Multiple domains are prepared for the family, this patch prepares
> the common functions.
>
> Signed-off-by: Baoyou Xie <baoyou.xie at linaro.org>
> ---
> drivers/soc/Kconfig | 1 +
> drivers/soc/Makefile | 1 +
> drivers/soc/zte/Kconfig | 13 ++++
> drivers/soc/zte/Makefile | 4 ++
> drivers/soc/zte/pm_domains.c | 150 +++++++++++++++++++++++++++++++++++++++++++
> drivers/soc/zte/pm_domains.h | 48 ++++++++++++++
> 6 files changed, 217 insertions(+)
> create mode 100644 drivers/soc/zte/Kconfig
> create mode 100644 drivers/soc/zte/Makefile
> create mode 100644 drivers/soc/zte/pm_domains.c
> create mode 100644 drivers/soc/zte/pm_domains.h
>
> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
> index f31bceb..f09023f 100644
> --- a/drivers/soc/Kconfig
> +++ b/drivers/soc/Kconfig
> @@ -11,5 +11,6 @@ source "drivers/soc/tegra/Kconfig"
> source "drivers/soc/ti/Kconfig"
> source "drivers/soc/ux500/Kconfig"
> source "drivers/soc/versatile/Kconfig"
> +source "drivers/soc/zte/Kconfig"
>
> endmenu
> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
> index 50c23d0..05eae52 100644
> --- a/drivers/soc/Makefile
> +++ b/drivers/soc/Makefile
> @@ -16,3 +16,4 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
> obj-$(CONFIG_SOC_TI) += ti/
> obj-$(CONFIG_ARCH_U8500) += ux500/
> obj-$(CONFIG_PLAT_VERSATILE) += versatile/
> +obj-$(CONFIG_ARCH_ZX) += zte/
> diff --git a/drivers/soc/zte/Kconfig b/drivers/soc/zte/Kconfig
> new file mode 100644
> index 0000000..4953c3fa
> --- /dev/null
> +++ b/drivers/soc/zte/Kconfig
> @@ -0,0 +1,13 @@
> +#
> +# zx SoC drivers
> +#
> +menuconfig SOC_ZX
Can we use SOC_ZTE to reflect the folder name 'zte'? If we take
drivers/soc/samsung/Kconfig as example, SAMSUNG is like ZTE, while
EXYNOS is like ZX, I guess.
> + bool "zx SoC driver support"
> +
> +if SOC_ZX
> +
> +config ZX_PM_DOMAINS
> + bool "zx PM domains"
> + depends on PM_GENERIC_DOMAINS
> +
> +endif
> diff --git a/drivers/soc/zte/Makefile b/drivers/soc/zte/Makefile
> new file mode 100644
> index 0000000..97ac8ea
> --- /dev/null
> +++ b/drivers/soc/zte/Makefile
> @@ -0,0 +1,4 @@
> +#
> +# zx SOC drivers
> +#
> +obj-$(CONFIG_ZX_PM_DOMAINS) += pm_domains.o
> diff --git a/drivers/soc/zte/pm_domains.c b/drivers/soc/zte/pm_domains.c
> new file mode 100644
> index 0000000..e4d1235
> --- /dev/null
> +++ b/drivers/soc/zte/pm_domains.c
> @@ -0,0 +1,150 @@
> +/*
> + * Copyright (C) 2015 ZTE Ltd.
Do we at least need year 2016?
> + *
> + * Author: Baoyou Xie <baoyou.xie at linaro.org>
> + * License terms: GNU General Public License (GPL) version 2
I see drivers/soc/zte/pm_domains.h use a different licence format. Can
we make them unified?
> + */
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include "pm_domains.h"
> +
> +#define PCU_DM_CLKEN(zpd) ((zpd)->reg_offset[REG_CLKEN])
> +#define PCU_DM_ISOEN(zpd) ((zpd)->reg_offset[REG_ISOEN])
> +#define PCU_DM_RSTEN(zpd) ((zpd)->reg_offset[REG_RSTEN])
> +#define PCU_DM_PWREN(zpd) ((zpd)->reg_offset[REG_PWREN])
> +#define PCU_DM_PWRDN(zpd) ((zpd)->reg_offset[REG_PWRDN])
> +#define PCU_DM_ACK_SYNC(zpd) ((zpd)->reg_offset[REG_ACK_SYNC])
> +
> +static void __iomem *pcubase;
> +
> +int zx_normal_power_on(struct generic_pm_domain *domain)
What does 'normal' in the function name mean?
> +{
> + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain;
> + unsigned long loop = 1000;
> + u32 val;
> +
> + if (zpd->polarity == PWREN) {
> + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd));
> + val |= BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd));
> + } else {
> + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd));
> + }
> +
> + do {
> + udelay(1);
> + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd))
> + & BIT(zpd->bit);
> + } while (--loop && !val);
> +
> + if (!loop) {
> + pr_err("Error: %s %s fail\n", __func__, domain->name);
> + return -EIO;
> + }
> +
> + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_RSTEN(zpd));
For a single bit setting, it can be as simple as the following, right?
val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
val |= BIT(zpd->bit);
writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_ISOEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_CLKEN(zpd));
Ditto
> + udelay(5);
> +
> + pr_info("normal poweron %s\n", domain->name);
Do we really want to see a message on every single power domain on/off
function call? A pr_debug is better?
> +
> + return 0;
> +}
> +
> +int zx_normal_power_off(struct generic_pm_domain *domain)
> +{
> + struct zx_pm_domain *zpd = (struct zx_pm_domain *)domain;
> + unsigned long loop = 1000;
> + u32 val;
> +
> + val = readl_relaxed(pcubase + PCU_DM_CLKEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_CLKEN(zpd));
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_ISOEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val | BIT(zpd->bit), pcubase + PCU_DM_ISOEN(zpd));
Same here.
> + udelay(5);
> +
> + val = readl_relaxed(pcubase + PCU_DM_RSTEN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_RSTEN(zpd));
> + udelay(5);
> +
> + if (zpd->polarity == PWREN) {
> + val = readl_relaxed(pcubase + PCU_DM_PWREN(zpd));
> + val &= ~BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_PWREN(zpd));
> + } else {
> + val = readl_relaxed(pcubase + PCU_DM_PWRDN(zpd));
> + val |= BIT(zpd->bit);
> + writel_relaxed(val, pcubase + PCU_DM_PWRDN(zpd));
> + }
> +
> + do {
> + udelay(1);
> + val = readl_relaxed(pcubase + PCU_DM_ACK_SYNC(zpd))
> + & BIT(zpd->bit);
> + } while (--loop && val);
> +
> + if (!loop) {
> + pr_err("Error: %s %s fail\n", __func__, domain->name);
> + return -EIO;
> + }
> +
> + pr_info("normal poweroff %s\n", domain->name);
pr_debug
> +
> + return 0;
> +}
> +
> +int
> +zx_pd_probe(struct platform_device *pdev,
I do not see the need to break above two lines.
> + struct generic_pm_domain **zx_pm_domains,
> + int domain_num)
As long as the line doesn't exceed column 80, we do not need to break
the line into two.
> +{
> + struct genpd_onecell_data *genpd_data;
> + struct resource *res;
> + int i;
> +
> + genpd_data = devm_kzalloc(&pdev->dev, sizeof(*genpd_data), GFP_KERNEL);
> + if (!genpd_data)
> + return -ENOMEM;
> +
> + genpd_data->domains = zx_pm_domains;
> + genpd_data->num_domains = domain_num;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "no memory resource defined\n");
> + return -ENODEV;
> + }
The error check on 'res' is not really necessary, as
devm_ioremap_resource() will do that for you.
> +
> + pcubase = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(pcubase)) {
> + dev_err(&pdev->dev, "ioremap fail.\n");
> + return -EIO;
PTR_ERR(pcubase) should be returned as error code here.
> + }
> +
> + for (i = 0; i < domain_num; ++i)
> + pm_genpd_init(zx_pm_domains[i], NULL, false);
> +
> + of_genpd_add_provider_onecell(pdev->dev.of_node, genpd_data);
> + dev_info(&pdev->dev, "powerdomain init ok\n");
> + return 0;
> +}
> diff --git a/drivers/soc/zte/pm_domains.h b/drivers/soc/zte/pm_domains.h
> new file mode 100644
> index 0000000..d3a52fd
> --- /dev/null
> +++ b/drivers/soc/zte/pm_domains.h
> @@ -0,0 +1,48 @@
> +/*
> + * Copyright (c) 2015 ZTE Co., Ltd.
> + * http://www.zte.com.cn
> + *
> + * Header for ZTE's Power Domain Driver support
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __ZTE_PM_DOMAIN_H
> +#define __ZTE_PM_DOMAIN_H
> +
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +
> +enum {
> + REG_CLKEN,
> + REG_ISOEN,
> + REG_RSTEN,
> + REG_PWREN,
> + REG_PWRDN,
> + REG_ACK_SYNC,
> +
> + /* The size of the array - must be last */
> + REG_ARRAY_SIZE,
> +};
> +
> +enum zx_power_polarity {
> + PWREN,
> + PWRDN,
> +};
> +
> +struct zx_pm_domain {
> + struct generic_pm_domain dm;
You can chose to have more tabs between 'generic_pm_domain' and 'dm'
for indention, but there should always be one space between 'struct' and
'generic_pm_domain'.
> + const u16 bit;
> + const enum zx_power_polarity polarity;
> + const u16 *reg_offset;
> +};
> +
> +extern int zx_normal_power_on(struct generic_pm_domain *domain);
> +extern int zx_normal_power_off(struct generic_pm_domain *domain);
> +extern int
> +zx_pd_probe(struct platform_device *pdev,
> + struct generic_pm_domain **zx_pm_domains,
> + int domain_num);
We do not need to break it into so many lines.
> +#endif /* __ZTE_PM_DOMAIN_H */
> --
> 2.7.4
>
More information about the linux-arm-kernel
mailing list