[PATCH v5 2/4] drm: bridge: add support for TI ths8135
Bartosz Golaszewski
bgolaszewski at baylibre.com
Wed Dec 7 02:42:43 PST 2016
THS8135 is a configurable video DAC. Add DT bindings for this chip and
use the dumb-vga-dac driver for now as no configuration is required to
make it work.
Signed-off-by: Bartosz Golaszewski <bgolaszewski at baylibre.com>
---
.../bindings/display/bridge/ti,ths8135.txt | 52 ++++++++++++++++++++++
drivers/gpu/drm/bridge/dumb-vga-dac.c | 1 +
2 files changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
new file mode 100644
index 0000000..23cd8ee
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt
@@ -0,0 +1,52 @@
+THS8135 Video DAC
+-----------------
+
+This is the binding for Texas Instruments THS8135 Video DAC bridge.
+
+Required properties:
+
+- compatible: Must be "ti,ths8135"
+
+Required nodes:
+
+This device has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for RGB input
+- Video port 1 for VGA output
+
+Example
+-------
+
+vga-bridge {
+ compatible = "ti,ths8135";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ vga_bridge_in: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&lcdc_out_vga>;
+ };
+ };
+
+ port at 1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ vga_bridge_out: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&vga_con_in>;
+ };
+ };
+ };
+};
diff --git a/drivers/gpu/drm/bridge/dumb-vga-dac.c b/drivers/gpu/drm/bridge/dumb-vga-dac.c
index afec232..498fa75 100644
--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c
+++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c
@@ -204,6 +204,7 @@ static int dumb_vga_remove(struct platform_device *pdev)
static const struct of_device_id dumb_vga_match[] = {
{ .compatible = "dumb-vga-dac" },
+ { .compatible = "ti,ths8135" },
{},
};
MODULE_DEVICE_TABLE(of, dumb_vga_match);
--
2.9.3
More information about the linux-arm-kernel
mailing list