[PATCH 2/5] ARM: BCM5301X: Specify USB controllers in DT

[Rafał Miłecki]

On 6 December 2016 at 18:28, Ray Jui <ray.jui at broadcom.com> wrote:
> On 12/6/2016 9:17 AM, Rafał Miłecki wrote:
>> From: Rafał Miłecki <rafal at milecki.pl>
>>
>> There are 3 separated controllers, one per USB /standard/. With PHY
>> drivers in place they can be simply supported with generic drivers.
>>
>> Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
>> ---
>>  arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
>>  1 file changed, 32 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
>> index f09a2bb..bfc98d19 100644
>> --- a/arch/arm/boot/dts/bcm5301x.dtsi
>> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
>> @@ -248,8 +248,26 @@
>>
>>                       #address-cells = <1>;
>>                       #size-cells = <1>;
>> +                     ranges;
>>
>> -                     phys = <&usb2_phy>;
>> +                     interrupt-parent = <&gic>;
>> +
>> +                     ohci: ohci at 21000 {
>> +                             #usb-cells = <0>;
>> +
>> +                             compatible = "generic-ohci";
>> +                             reg = <0x00022000 0x1000>;
>
> Your label ohci at 21000 does not match the 'reg' at 0x22000.
>
>> +                             interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
>> +                     };
>> +
>> +                     ehci: ehci at 22000 {
>> +                             #usb-cells = <0>;
>> +
>> +                             compatible = "generic-ehci";
>> +                             reg = <0x00021000 0x1000>;
>
> Looks like you got the label of ohci and ehci reversed?

Nice catch, thanks! I'll fix it in V2 (just let me wait a day to see
if there will be other comments).

-- 
Rafał