[PATCH] serial: mxs-auart: support CMSPAR termios cflag

[Stefan Wahren]

Hi Wolfgang,

> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -95,6 +95,7 @@
>  #define AUART_LINECTRL_BAUD_DIVFRAC_SHIFT	8
>  #define AUART_LINECTRL_BAUD_DIVFRAC_MASK	0x00003f00
>  #define AUART_LINECTRL_BAUD_DIVFRAC(v)		(((v) & 0x3f) << 8)
> +#define AUART_LINECTRL_SPS			(1 << 7)
>  #define AUART_LINECTRL_WLEN_MASK		0x00000060
>  #define AUART_LINECTRL_WLEN(v)			(((v) & 0x3) << 5)
>  #define AUART_LINECTRL_FEN			(1 << 4)
> @@ -1010,10 +1011,12 @@ static void mxs_auart_settermios(struct uart_port *u,
> 	ctrl |= AUART_LINECTRL_WLEN(bm);
> 
> 	/* parity */
> -	if (cflag & PARENB) {
> +	if (cflag & (PARENB|CMSPAR)) {

does it make sense to enable stick parity in case parity is disabled?

The i.MX28 reference manual doesn't describe this case explicit.

Stefan