[PATCH v4 1/7] MFD: add bindings for STM32 General Purpose Timer driver

Benjamin Gaignard benjamin.gaignard at linaro.org
Tue Dec 6 04:38:43 PST 2016


Add bindings information for STM32 General Purpose Timer

version 2:
- rename stm32-mfd-timer to stm32-gptimer
- only keep one compatible string

Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
---
 .../bindings/mfd/stm32-general-purpose-timer.txt   | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt

diff --git a/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
new file mode 100644
index 0000000..e92c8be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stm32-general-purpose-timer.txt
@@ -0,0 +1,39 @@
+STM32 General Purpose Timer driver bindings
+
+Required parameters:
+- compatible: must be "st,stm32-gptimer"
+
+- reg:			Physical base address and length of the controller's
+			registers.
+- clock-names: 		Set to "clk_int".
+- clocks: 		Phandle to the clock used by the timer module.
+			For Clk properties, please refer to ../clock/clock-bindings.txt
+
+Optional parameters:
+- resets:		Phandle to the parent reset controller.
+			See ../reset/st,stm32-rcc.txt
+
+Optional subnodes:
+- pwm:			See ../pwm/pwm-stm32.txt
+- timer:		See ../iio/timer/stm32-timer-trigger.txt
+
+Example:
+	gptimer at 40010000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "st,stm32-gptimer";
+		reg = <0x40010000 0x400>;
+		clocks = <&rcc 0 160>;
+		clock-names = "clk_int";
+
+		pwm at 0 {
+			compatible = "st,stm32-pwm";
+			pinctrl-0	= <&pwm1_pins>;
+			pinctrl-names	= "default";
+		};
+
+		timer at 0 {
+			compatible = "st,stm32-timer-trigger";
+			reg = <0>;
+		};
+	};
-- 
1.9.1




More information about the linux-arm-kernel mailing list