[PATCH v2 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad
Fabio Estevam
festevam at gmail.com
Tue Dec 6 01:42:23 PST 2016
Hi Milo,
On Tue, Dec 6, 2016 at 5:08 AM, Milo Kim <woogyom.kim at gmail.com> wrote:
> Poslab Savageboard is i.MX6 SoC base, but BSP code from the vendor is
> not mainline u-boot and kernel. Personal reason of using this board is
> testing etnaviv user-space driver, so I re-write device tree files based on
> mainline kernel for the first step.
>
> This patchset includes common DT file, dual and quad board files.
>
> Supported components are
> - Display: HDMI and LVDS panel
> - eMMC and SD card
> - Ethernet
> - Pinmux configuration
> - SATA: only for Savageboard quad
> - UART1 for debug console
> - USB host
>
> Missing features are
> - Audio (WM8903)
> - USB OTG
> - PMIC WM8326: default settings are used so no issue to bring-up the system
> - MIPI DSI, CSI
>
> Patches are tested on the Savageboard quad but the dual version should work
> because the only difference between dual and quad is SATA support.
>
> More information in http://www.savageboard.org
>
> v2:
> Fix DT node for regulator, phy-reset-gpios and iomuxc node.
>
> Milo Kim (3):
> ARM: dts: imx6: Add Savageboard common file
> ARM: dts: imx6: Support Savageboard dual
> ARM: dts: imx6: Support Savageboard quad
>
> arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++
> arch/arm/boot/dts/imx6q-savageboard.dts | 54 ++++++
> arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++
You missed to add imx6q-savageboard.dtb and imx6dl-savageboard.dtb
entries into arch/arm/boot/dts/Makefile
More information about the linux-arm-kernel
mailing list