[PATCH] ARM: dts: imx6sx-udoo-neo: Pass the 'phy-reset-duration' property
Fabio Estevam
festevam at gmail.com
Mon Dec 5 11:28:39 PST 2016
From: Fabio Estevam <fabio.estevam at nxp.com>
imx6sx-udoo-neo has a KSZ8091 Ethernet PHY, which requires the reset
signal to be low for at least 10ms.
Pass the 'phy-reset-duration' property to reflect such requirement.
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 2b65d26..d1ce9af 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -86,6 +86,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
+ phy-reset-duration = <10>;
phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
--
2.7.4
More information about the linux-arm-kernel
mailing list