[PATCH v3 1/3] ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup

[Andrey Smirnov]

Remove pwm0grp since it is:

	a) Not referenced anywhere in the DTS file (unlike Tower board it
	is based on, this board does not use/expose FTM0)

	b) Configures PTB2 and PTB3 in a way that contradicts
	pinctrl-mdio-mux

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---

Changes since v2:

	- None

 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index fa19cfd..2210811 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -677,15 +677,6 @@
 		>;
 	};
 
-	pinctrl_pwm0: pwm0grp {
-		fsl,pins = <
-			VF610_PAD_PTB0__FTM0_CH0	0x1582
-			VF610_PAD_PTB1__FTM0_CH1	0x1582
-			VF610_PAD_PTB2__FTM0_CH2	0x1582
-			VF610_PAD_PTB3__FTM0_CH3	0x1582
-		>;
-	};
-
 	pinctrl_qspi0: qspi0grp {
 		fsl,pins = <
 			VF610_PAD_PTD7__QSPI0_B_QSCK	0x31c3
-- 
2.5.5