[PATCH v3 7/7] ARM: dts: stm32: add stm32 general purpose timer driver in DT
Benjamin Gaignard
benjamin.gaignard at linaro.org
Fri Dec 2 02:17:22 PST 2016
Add general purpose timers and it sub-nodes into DT for stm32f4.
Define and enable pwm1 and pwm3 for stm32f469 discovery board
version 3:
- use "st,stm32-timer-trigger" in DT
version 2:
- use parameters to describe hardware capabilities
- do not use references for pwm and iio timer subnodes
Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
---
arch/arm/boot/dts/stm32f429.dtsi | 333 +++++++++++++++++++++++++++++++++-
arch/arm/boot/dts/stm32f469-disco.dts | 28 +++
2 files changed, 360 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index bca491d..8c50d03 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -48,7 +48,7 @@
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
-
+#include <dt-bindings/iio/timer/st,stm32-timer-triggers.h>
/ {
clocks {
clk_hse: clk-hse {
@@ -355,6 +355,21 @@
slew-rate = <2>;
};
};
+
+ pwm1_pins: pwm at 1 {
+ pins {
+ pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+ <STM32F429_PB13_FUNC_TIM1_CH1N>,
+ <STM32F429_PB12_FUNC_TIM1_BKIN>;
+ };
+ };
+
+ pwm3_pins: pwm at 3 {
+ pins {
+ pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+ <STM32F429_PB5_FUNC_TIM3_CH2>;
+ };
+ };
};
rcc: rcc at 40023810 {
@@ -426,6 +441,322 @@
interrupts = <80>;
clocks = <&rcc 0 38>;
};
+
+ gptimer1: gptimer1 at 40010000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 160>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm1 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ st,breakinput;
+ st,complementary;
+ status = "disabled";
+ };
+
+ timer1 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <27>;
+ st,input-triggers-names = TIM5_TRGO,
+ TIM2_TRGO,
+ TIM4_TRGO,
+ TIM3_TRGO;
+ st,output-triggers-names = TIM1_TRGO,
+ TIM1_CH1,
+ TIM1_CH2,
+ TIM1_CH3,
+ TIM1_CH4;
+ status = "disabled";
+ };
+ };
+
+ gptimer2: gptimer2 at 40000000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40000000 0x400>;
+ clocks = <&rcc 0 128>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm2 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ st,32bits-counter;
+ status = "disabled";
+ };
+
+ timer2 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <28>;
+ st,input-triggers-names = TIM1_TRGO,
+ TIM8_TRGO,
+ TIM3_TRGO,
+ TIM4_TRGO;
+ st,output-triggers-names = TIM2_TRGO,
+ TIM2_CH1,
+ TIM2_CH2,
+ TIM2_CH3,
+ TIM2_CH4;
+ status = "disabled";
+ };
+ };
+
+ gptimer3: gptimer3 at 40000400 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40000400 0x400>;
+ clocks = <&rcc 0 129>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm3 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ status = "disabled";
+ };
+
+ timer3 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <29>;
+ st,input-triggers-names = TIM1_TRGO,
+ TIM8_TRGO,
+ TIM5_TRGO,
+ TIM4_TRGO;
+ st,output-triggers-names = TIM3_TRGO,
+ TIM3_CH1,
+ TIM3_CH2,
+ TIM3_CH3,
+ TIM3_CH4;
+ status = "disabled";
+ };
+ };
+
+ gptimer4: gptimer4 at 40000800 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40000800 0x400>;
+ clocks = <&rcc 0 130>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm4 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ status = "disabled";
+ };
+
+ timer4 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <30>;
+ st,input-triggers-names = TIM1_TRGO,
+ TIM2_TRGO,
+ TIM3_TRGO,
+ TIM8_TRGO;
+ st,output-triggers-names = TIM4_TRGO,
+ TIM4_CH1,
+ TIM4_CH2,
+ TIM4_CH3,
+ TIM4_CH4;
+ status = "disabled";
+ };
+ };
+
+ gptimer5: gptimer5 at 40000C00 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40000C00 0x400>;
+ clocks = <&rcc 0 131>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm5 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ st,32bits-counter;
+ status = "disabled";
+ };
+
+ timer5 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <50>;
+ st,input-triggers-names = TIM2_TRGO,
+ TIM3_TRGO,
+ TIM4_TRGO,
+ TIM8_TRGO;
+ st,output-triggers-names = TIM5_TRGO,
+ TIM5_CH1,
+ TIM5_CH2,
+ TIM5_CH3,
+ TIM5_CH4;
+ status = "disabled";
+ };
+ };
+
+ gptimer6: gptimer6 at 40001000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40001000 0x400>;
+ clocks = <&rcc 0 132>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ timer6 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <54>;
+ st,output-triggers-names = TIM6_TRGO;
+ status = "disabled";
+ };
+ };
+
+ gptimer7: gptimer7 at 40001400 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40001400 0x400>;
+ clocks = <&rcc 0 133>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ timer7 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <55>;
+ st,output-triggers-names = TIM7_TRGO;
+ status = "disabled";
+ };
+ };
+
+ gptimer8: gptimer8 at 40010400 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40010400 0x400>;
+ clocks = <&rcc 0 161>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm8 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ st,complementary;
+ st,breakinput;
+ status = "disabled";
+ };
+
+ timer8 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <46>;
+ st,input-triggers-names = TIM1_TRGO,
+ TIM2_TRGO,
+ TIM4_TRGO,
+ TIM5_TRGO;
+ st,output-triggers-names = TIM8_TRGO,
+ TIM8_CH1,
+ TIM8_CH2,
+ TIM8_CH3,
+ TIM8_CH4;
+ status = "disabled";
+ };
+ };
+
+ gptimer9: gptimer9 at 40014000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40014000 0x400>;
+ clocks = <&rcc 0 176>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm9 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <2>;
+ status = "disabled";
+ };
+
+ timer9 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <24>;
+ st,input-triggers-names = TIM2_TRGO,
+ TIM3_TRGO;
+ st,output-triggers-names = TIM9_TRGO,
+ TIM9_CH1,
+ TIM9_CH2;
+ status = "disabled";
+ };
+ };
+
+ gptimer10: gptimer10 at 40014400 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40014400 0x400>;
+ clocks = <&rcc 0 177>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm10 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <1>;
+ status = "disabled";
+ };
+ };
+
+ gptimer11: gptimer11 at 40014800 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40014800 0x400>;
+ clocks = <&rcc 0 178>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm11 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <1>;
+ status = "disabled";
+ };
+ };
+
+ gptimer12: gptimer12 at 40001800 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40001800 0x400>;
+ clocks = <&rcc 0 134>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm12 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <2>;
+ status = "disabled";
+ };
+
+ timer12 at 0 {
+ compatible = "st,stm32-timer-trigger";
+ interrupts = <43>;
+ st,input-triggers-names = TIM4_TRGO,
+ TIM5_TRGO;
+ st,output-triggers-names = TIM12_TRGO,
+ TIM12_CH1,
+ TIM12_CH2;
+ status = "disabled";
+ };
+ };
+
+ gptimer13: gptimer13 at 40001C00 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40001C00 0x400>;
+ clocks = <&rcc 0 135>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm13 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <1>;
+ status = "disabled";
+ };
+ };
+
+ gptimer14: gptimer14 at 40002000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40002000 0x400>;
+ clocks = <&rcc 0 136>;
+ clock-names = "clk_int";
+ status = "disabled";
+
+ pwm14 at 0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <1>;
+ status = "disabled";
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 8a163d7..df4ca7e 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -81,3 +81,31 @@
&usart3 {
status = "okay";
};
+
+&gptimer1 {
+ status = "okay";
+
+ pwm1 at 0 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer1 at 0 {
+ status = "okay";
+ };
+};
+
+&gptimer3 {
+ status = "okay";
+
+ pwm3 at 0 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ timer3 at 0 {
+ status = "okay";
+ };
+};
--
1.9.1
More information about the linux-arm-kernel
mailing list