[PATCH v7 2/4] i2c: pxa: Add support for the I2C units found in Armada 3700
Romain Perier
romain.perier at free-electrons.com
Thu Dec 1 03:04:38 PST 2016
The Armada 3700 has two I2C controllers that is compliant with the I2C
Bus Specificiation 2.1, supports multi-master and different bus speed:
Standard mode (up to 100 KHz), Fast mode (up to 400 KHz),
High speed mode (up to 3.4 Mhz).
This IP block has a lot of similarity with the PXA, except some register
offsets and bitfield. This commits adds a basic support for this I2C
unit.
Signed-off-by: Romain Perier <romain.perier at free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
Changes in v6:
- Revert back A3700_REGS, as asked by Wolfram and define fm_mask
and hs_mask in the register layout. I moved the generic code
for fm_mask and hs_mask to a seperated commit (1/4)
Changes in v5:
- Don't define registers for armada-3700, we can re-use the ones
for PXA3XX.
- Define registers mask when OF is not used, in probe_pdata.
Changes in v4:
- Replaced the type of hs_mask and fm_mask by u32, instead of
unsigned int, As writel() take an u32 as first argument...
Changes in v3:
- Replaced the type of hs_mask and fm_mask by unsigned int,
instead of unsigned long.
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-pxa.c | 15 +++++++++++++++
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d252276..2f56a26 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -763,7 +763,7 @@ config I2C_PUV3
config I2C_PXA
tristate "Intel PXA2XX I2C adapter"
- depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
+ depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index b4ac235..6cf333e 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -57,8 +57,12 @@ enum pxa_i2c_types {
REGS_PXA3XX,
REGS_CE4100,
REGS_PXA910,
+ REGS_A3700,
};
+#define ICR_BUSMODE_FM (1 << 16) /* shifted fast mode for armada-3700 */
+#define ICR_BUSMODE_HS (1 << 17) /* shifted high speed mode for armada-3700 */
+
/*
* I2C registers definitions
*/
@@ -93,6 +97,15 @@ static struct pxa_reg_layout pxa_reg_layout[] = {
.ilcr = 0x28,
.iwcr = 0x30,
},
+ [REGS_A3700] = {
+ .ibmr = 0x00,
+ .idbr = 0x04,
+ .icr = 0x08,
+ .isr = 0x0c,
+ .isar = 0x10,
+ .fm = ICR_BUSMODE_FM,
+ .hs = ICR_BUSMODE_HS,
+ },
};
static const struct platform_device_id i2c_pxa_id_table[] = {
@@ -100,6 +113,7 @@ static const struct platform_device_id i2c_pxa_id_table[] = {
{ "pxa3xx-pwri2c", REGS_PXA3XX },
{ "ce4100-i2c", REGS_CE4100 },
{ "pxa910-i2c", REGS_PXA910 },
+ { "armada-3700-i2c", REGS_A3700 },
{ },
};
MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
@@ -1141,6 +1155,7 @@ static const struct of_device_id i2c_pxa_dt_ids[] = {
{ .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX },
{ .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX },
{ .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA910 },
+ { .compatible = "marvell,armada-3700-i2c", .data = (void *)REGS_A3700 },
{}
};
MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids);
--
2.9.3
More information about the linux-arm-kernel
mailing list