[PATCH RFC 4/5] drm/bridge: add dw-hdmi cec driver using Hans Verkil's CEC code
Russell King - ARM Linux
linux at armlinux.org.uk
Wed Aug 31 05:28:35 PDT 2016
On Tue, Aug 23, 2016 at 10:05:45AM +0200, Hans Verkuil wrote:
>
>
> On 08/23/16 09:59, Russell King - ARM Linux wrote:
> > On Tue, Aug 23, 2016 at 09:21:17AM +0200, Hans Verkuil wrote:
> >> Hi Russell,
> >>
> >> On 08/12/2016 04:15 PM, Russell King wrote:
> >>> Add a CEC driver for the dw-hdmi hardware using Hans Verkil's CEC
> >>> implementation.
> >>>
> >>> Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
> >>> ---
> >>> drivers/gpu/drm/bridge/Kconfig | 7 +
> >>> drivers/gpu/drm/bridge/Makefile | 1 +
> >>> drivers/gpu/drm/bridge/dw-hdmi-cec.c | 344 ++++++++++++++++++++++++++++++
> >>> drivers/gpu/drm/bridge/dw-hdmi.c | 64 +++++-
> >>> include/linux/platform_data/dw_hdmi-cec.h | 16 ++
> >>> 5 files changed, 421 insertions(+), 11 deletions(-)
> >>> create mode 100644 drivers/gpu/drm/bridge/dw-hdmi-cec.c
> >>> create mode 100644 include/linux/platform_data/dw_hdmi-cec.h
> >>>
> >>
> >> <snip>
> >>
> >>> +static unsigned int parse_hdmi_addr(const struct edid *edid)
> >>> +{
> >>> + if (!edid || edid->extensions == 0)
> >>> + return (u16)~0;
> >>> +
> >>> + return cec_get_edid_phys_addr((u8 *)edid,
> >>> + EDID_LENGTH * (edid->extensions + 1), NULL);
> >>> +}
> >>> +
> >>> +static int dw_hdmi_cec_notify(struct notifier_block *nb, unsigned long event,
> >>> + void *data)
> >>> +{
> >>> + struct dw_hdmi_cec *cec = container_of(nb, struct dw_hdmi_cec, nb);
> >>> + union hdmi_event *event_block = data;
> >>> + unsigned int phys;
> >>> +
> >>> + dev_info(event_block->base.source, "event %lu\n", event);
> >>> +
> >>> + if (event_block->base.source != cec->adap->devnode.parent)
> >>> + return NOTIFY_OK;
> >>> +
> >>> + switch (event) {
> >>> + case HDMI_CONNECTED:
> >>> + break;
> >>> +
> >>> + case HDMI_DISCONNECTED:
> >>> + cec_s_phys_addr(cec->adap, CEC_PHYS_ADDR_INVALID, false);
> >>> + break;
> >>> +
> >>> + case HDMI_NEW_EDID:
> >>> + phys = parse_hdmi_addr(event_block->edid.edid);
> >>> + cec_s_phys_addr(cec->adap, phys, false);
> >>> + break;
> >>> + }
> >>> +
> >>> + return NOTIFY_OK;
> >>> +}
> >>
> >> Wouldn't it make a lot of sense to integrate this into the cec framework?
> >>
> >> All you need is to pass an hdmi_notifier_dev as argument to cec_allocate_adapter()
> >> and you can integrate this.
> >>
> >> If you are OK with that, then I can make patches for that.
> >
> > It's not just about CEC. It's also used for passing information between
> > the video and audio parts, so tying this into CEC is wrong.
>
> I'm not saying that the hdmi notifier should be integrated, just that the
> CEC core can register itself as a notifier and handle cec_s_phys_addr.
Yes, that would decrease the amount of code duplication.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
More information about the linux-arm-kernel
mailing list