[PATCH v2 3/4] pinctrl: sunxi: Remove unsupported PWM channel pinmux in H3

[Milo Kim]

H3 has single PWM channel. The second PWM channel is not supported,
so the pinctrl function should be removed.

Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Maxime Ripard <maxime.ripard at free-electrons.com>
Cc: Chen-Yu Tsai <wens at csie.org>
Cc: Icenowy Zheng <icenowy at aosc.xyz>
Cc: Jens Kuske <jenskuske at gmail.com>
Cc: Krzysztof Adamski <k at japko.eu>
Cc: linux-gpio at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Milo Kim <woogyom.kim at gmail.com>
---
 drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
index 26a2ad3..518a92d 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-h3.c
@@ -60,7 +60,6 @@ static const struct sunxi_desc_pin sun8i_h3_pins[] = {
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
 		  SUNXI_FUNCTION(0x1, "gpio_out"),
 		  SUNXI_FUNCTION(0x2, "sim"),		/* PWREN */
-		  SUNXI_FUNCTION(0x3, "pwm1"),
 		  SUNXI_FUNCTION_IRQ_BANK(0x6, 0, 6)),	/* PA_EINT6 */
 	SUNXI_PIN(SUNXI_PINCTRL_PIN(A, 7),
 		  SUNXI_FUNCTION(0x0, "gpio_in"),
-- 
2.9.3