[PATCH V3 RFT 3/5] ARM64: dts: bcm283x: Use dtsi for USB host mode

[Stefan Wahren]

Hi Gerd,

Am 21.08.2016 um 17:10 schrieb Stefan Wahren:
> In case dr_mode isn't passed via DT, the dwc2 driver defaults
> to OTG mode. But the Raspberry Pi 3 is designed only for host mode.
> So fix this issue by linking to the dtsi file which set the dr_mode
> to host.

this patch is pending and the rest has been merged. Since i don't have a
RPi 3 it's only compile tested.

Could you please test it (requires patch 1 and 2 of this series) on your
RPi 3?

Regards
Stefan

>
> Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
> ---
>  arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts   |    1 +
>  .../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi    |    1 +
>  2 files changed, 2 insertions(+)
>  create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
>
> diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
> index 7841b72..7625e57 100644
> --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
> +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
> @@ -2,6 +2,7 @@
>  #include "bcm2837.dtsi"
>  #include "bcm2835-rpi.dtsi"
>  #include "bcm283x-rpi-smsc9514.dtsi"
> +#include "bcm283x-rpi-usb-host.dtsi"
>  
>  / {
>  	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
> diff --git a/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
> new file mode 120000
> index 0000000..cbeebe3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
> @@ -0,0 +1 @@
> +../../../../arm/boot/dts/bcm283x-rpi-usb-host.dtsi
> \ No newline at end of file