[PATCH 1/1] mach-hisi: Make Hi3620 explicit, remove wildcard
Marty Plummer
netz.kernel at gmail.com
Tue Aug 30 12:29:36 PDT 2016
On 08/30/2016 02:17 PM, Jason Cooper wrote:
> Hi Marty,
>
> Not bad for a first patch. :-)
>
> Please Cc folks who were in the earlier conversations as well. It's a
> lot easier to see it amongst 50-100 email/day vice 800-1500. I added
> Arnd and Russell.
>
> On Tue, Aug 30, 2016 at 12:38:27PM -0500, Marty Plummer wrote:
>
> Please put an explanation in the commit log that gives future readers
> (and reviewers) the "why".
>
> e.g. "This is a preparatory series for adding the ARMv5 hisi35xx SoCs.
> Assumptions were made when adding hisi 36xx that don't hold water in
> light of adding support for the ARMv5 SoC. Fix the issue by renaming
> config options and other namespaces to avoid collisions with the new
> work.
>
> Only internal APIs are modified with this series."
>
> Or something like that.
>
Ah, well since it pretty much only consists of renames and no actual
changes in behavior I though it fell under the category of a trivial
patch.
>> Signed-off-by: Marty Plummer <netz.kernel at gmail.com>
>> ---
>
> This needs to be split up into a series of patches:
>
>> arch/arm/Kconfig.debug | 2 +-
>
>> arch/arm/boot/dts/Makefile | 2 +-
>
>> arch/arm/configs/hisi_defconfig | 2 +-
>
>> arch/arm/configs/multi_v7_defconfig | 2 +-
>
>> arch/arm/mach-hisi/Kconfig | 6 +++---
>> arch/arm/mach-hisi/core.h | 10 +++++-----
>> arch/arm/mach-hisi/hisilicon.c | 4 ++--
>> arch/arm/mach-hisi/hotplug.c | 16 ++++++++--------
>> arch/arm/mach-hisi/platsmp.c | 24 ++++++++++++------------
>
>> drivers/clk/hisilicon/Makefile | 2 +-
>
>> drivers/dma/Kconfig | 2 +-
>
> Most likely, the subsystem maintainers will Ack the relevant patch and
> then they'll go in together to avoid bisection issues.
>
Ah, ok. Once again, I thought since it made little in the way of 'real'
changes it was more or less irrelevant. I used `git format-patch' to
make the patch, and it was all one commit. should I instead then break
it down into multiple commits, then?
>> 11 files changed, 36 insertions(+), 36 deletions(-)
>>
>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
>> index a9693b6..9094ca6 100644
>> --- a/arch/arm/Kconfig.debug
>> +++ b/arch/arm/Kconfig.debug
>> @@ -280,7 +280,7 @@ choice
>>
>> config DEBUG_HI3620_UART
>> bool "Hisilicon HI3620 Debug UART"
>> - depends on ARCH_HI3xxx
>> + depends on ARCH_HI3620
>
> Is there a general rule like
>
> ARCH_HI36xx = ARMv7
> ARCH_HI35xx = ARMv5
>
> ?
Unsure about all Hi35xx chipsets, I've not had reason to look into those
yet for lack of hardware. However, ARCH_HI3520 is ARMv6/ARMv5, it has
two cores, arm1176/arm926
>
> If so, that might make a more sensible config option.
>
>> select DEBUG_UART_PL01X
>> help
>> Say Y here if you want kernel low-level debugging support
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index faacd52..7ffd3a3 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -154,7 +154,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
>> exynos5440-sd5v1.dtb \
>> exynos5440-ssdk5440.dtb \
>> exynos5800-peach-pi.dtb
>> -dtb-$(CONFIG_ARCH_HI3xxx) += \
>> +dtb-$(CONFIG_ARCH_HI3620) += \
>> hi3620-hi4511.dtb
>> dtb-$(CONFIG_ARCH_HIGHBANK) += \
>> highbank.dtb \
>> diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
>> index b2e340b..14c8da6 100644
>> --- a/arch/arm/configs/hisi_defconfig
>> +++ b/arch/arm/configs/hisi_defconfig
>> @@ -4,7 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
>> CONFIG_BLK_DEV_INITRD=y
>> CONFIG_RD_LZMA=y
>> CONFIG_ARCH_HISI=y
>> -CONFIG_ARCH_HI3xxx=y
>> +CONFIG_ARCH_HI3620=y
>> CONFIG_PARTITION_ADVANCED=y
>> CONFIG_CMDLINE_PARTITION=y
>> CONFIG_ARCH_HIX5HD2=y
>> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
>> index 2c8665c..a63865e 100644
>> --- a/arch/arm/configs/multi_v7_defconfig
>> +++ b/arch/arm/configs/multi_v7_defconfig
>> @@ -45,7 +45,7 @@ CONFIG_MACH_BERLIN_BG2Q=y
>> CONFIG_ARCH_DIGICOLOR=y
>> CONFIG_ARCH_HIGHBANK=y
>> CONFIG_ARCH_HISI=y
>> -CONFIG_ARCH_HI3xxx=y
>> +CONFIG_ARCH_HI3620=y
>> CONFIG_ARCH_HIX5HD2=y
>> CONFIG_ARCH_HIP01=y
>> CONFIG_ARCH_HIP04=y
>> diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
>> index a3b091a..08871e0 100644
>> --- a/arch/arm/mach-hisi/Kconfig
>> +++ b/arch/arm/mach-hisi/Kconfig
>> @@ -12,8 +12,8 @@ if ARCH_HISI
>>
>> menu "Hisilicon platform type"
>>
>> -config ARCH_HI3xxx
>> - bool "Hisilicon Hi36xx family"
>> +config ARCH_HI3620
>> + bool "Hisilicon Hi3620 family"
>
> Which would then help here.
>
> thx,
>
> Jason.
>
>> depends on ARCH_MULTI_V7
>> select CACHE_L2X0
>> select HAVE_ARM_SCU if SMP
>> @@ -21,7 +21,7 @@ config ARCH_HI3xxx
>> select PINCTRL
>> select PINCTRL_SINGLE
>> help
>> - Support for Hisilicon Hi36xx SoC family
>> + Support for Hisilicon Hi3620 SoC family
>>
>> config ARCH_HIP01
>> bool "Hisilicon HIP01 family"
>> diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h
>> index e883583..cb7bc84 100644
>> --- a/arch/arm/mach-hisi/core.h
>> +++ b/arch/arm/mach-hisi/core.h
>> @@ -3,13 +3,13 @@
>>
>> #include <linux/reboot.h>
>>
>> -extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr);
>> -extern int hi3xxx_get_cpu_jump(int cpu);
>> +extern void hi3620_set_cpu_jump(int cpu, void *jump_addr);
>> +extern int hi3620_get_cpu_jump(int cpu);
>> extern void secondary_startup(void);
>>
>> -extern void hi3xxx_cpu_die(unsigned int cpu);
>> -extern int hi3xxx_cpu_kill(unsigned int cpu);
>> -extern void hi3xxx_set_cpu(int cpu, bool enable);
>> +extern void hi3620_cpu_die(unsigned int cpu);
>> +extern int hi3620_cpu_kill(unsigned int cpu);
>> +extern void hi3620_set_cpu(int cpu, bool enable);
>>
>> extern void hix5hd2_set_cpu(int cpu, bool enable);
>> extern void hix5hd2_cpu_die(unsigned int cpu);
>> diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
>> index c08c44e..0aea7e9 100644
>> --- a/arch/arm/mach-hisi/hisilicon.c
>> +++ b/arch/arm/mach-hisi/hisilicon.c
>> @@ -44,12 +44,12 @@ static void __init hi3620_map_io(void)
>> iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
>> }
>>
>> -static const char *const hi3xxx_compat[] __initconst = {
>> +static const char *const hi3620_compat[] __initconst = {
>> "hisilicon,hi3620-hi4511",
>> NULL,
>> };
>>
>> DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
>> .map_io = hi3620_map_io,
>> - .dt_compat = hi3xxx_compat,
>> + .dt_compat = hi3620_compat,
>> MACHINE_END
>> diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
>> index a129aae..f06b428 100644
>> --- a/arch/arm/mach-hisi/hotplug.c
>> +++ b/arch/arm/mach-hisi/hotplug.c
>> @@ -143,7 +143,7 @@ static void set_cpu_hi3620(int cpu, bool enable)
>> }
>> }
>>
>> -static int hi3xxx_hotplug_init(void)
>> +static int hi3620_hotplug_init(void)
>> {
>> struct device_node *node;
>>
>> @@ -157,10 +157,10 @@ static int hi3xxx_hotplug_init(void)
>> return -ENOENT;
>> }
>>
>> -void hi3xxx_set_cpu(int cpu, bool enable)
>> +void hi3620_set_cpu(int cpu, bool enable)
>> {
>> if (!ctrl_base) {
>> - if (hi3xxx_hotplug_init() < 0)
>> + if (hi3620_hotplug_init() < 0)
>> return;
>> }
>>
>> @@ -262,24 +262,24 @@ static inline void cpu_enter_lowpower(void)
>> }
>>
>> #ifdef CONFIG_HOTPLUG_CPU
>> -void hi3xxx_cpu_die(unsigned int cpu)
>> +void hi3620_cpu_die(unsigned int cpu)
>> {
>> cpu_enter_lowpower();
>> - hi3xxx_set_cpu_jump(cpu, phys_to_virt(0));
>> + hi3620_set_cpu_jump(cpu, phys_to_virt(0));
>> cpu_do_idle();
>>
>> /* We should have never returned from idle */
>> panic("cpu %d unexpectedly exit from shutdown\n", cpu);
>> }
>>
>> -int hi3xxx_cpu_kill(unsigned int cpu)
>> +int hi3620_cpu_kill(unsigned int cpu)
>> {
>> unsigned long timeout = jiffies + msecs_to_jiffies(50);
>>
>> - while (hi3xxx_get_cpu_jump(cpu))
>> + while (hi3620_get_cpu_jump(cpu))
>> if (time_after(jiffies, timeout))
>> return 0;
>> - hi3xxx_set_cpu(cpu, false);
>> + hi3620_set_cpu(cpu, false);
>> return 1;
>> }
>>
>> diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
>> index e1d6764..e36783e 100644
>> --- a/arch/arm/mach-hisi/platsmp.c
>> +++ b/arch/arm/mach-hisi/platsmp.c
>> @@ -23,7 +23,7 @@
>>
>> static void __iomem *ctrl_base;
>>
>> -void hi3xxx_set_cpu_jump(int cpu, void *jump_addr)
>> +void hi3620_set_cpu_jump(int cpu, void *jump_addr)
>> {
>> cpu = cpu_logical_map(cpu);
>> if (!cpu || !ctrl_base)
>> @@ -31,7 +31,7 @@ void hi3xxx_set_cpu_jump(int cpu, void *jump_addr)
>> writel_relaxed(virt_to_phys(jump_addr), ctrl_base + ((cpu - 1) << 2));
>> }
>>
>> -int hi3xxx_get_cpu_jump(int cpu)
>> +int hi3620_get_cpu_jump(int cpu)
>> {
>> cpu = cpu_logical_map(cpu);
>> if (!cpu || !ctrl_base)
>> @@ -56,7 +56,7 @@ static void __init hisi_enable_scu_a9(void)
>> }
>> }
>>
>> -static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
>> +static void __init hi3620_smp_prepare_cpus(unsigned int max_cpus)
>> {
>> struct device_node *np = NULL;
>> u32 offset = 0;
>> @@ -81,20 +81,20 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
>> }
>> }
>>
>> -static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle)
>> +static int hi3620_boot_secondary(unsigned int cpu, struct task_struct *idle)
>> {
>> - hi3xxx_set_cpu(cpu, true);
>> - hi3xxx_set_cpu_jump(cpu, secondary_startup);
>> + hi3620_set_cpu(cpu, true);
>> + hi3620_set_cpu_jump(cpu, secondary_startup);
>> arch_send_wakeup_ipi_mask(cpumask_of(cpu));
>> return 0;
>> }
>>
>> -static const struct smp_operations hi3xxx_smp_ops __initconst = {
>> - .smp_prepare_cpus = hi3xxx_smp_prepare_cpus,
>> - .smp_boot_secondary = hi3xxx_boot_secondary,
>> +static const struct smp_operations hi3620_smp_ops __initconst = {
>> + .smp_prepare_cpus = hi3620_smp_prepare_cpus,
>> + .smp_boot_secondary = hi3620_boot_secondary,
>> #ifdef CONFIG_HOTPLUG_CPU
>> - .cpu_die = hi3xxx_cpu_die,
>> - .cpu_kill = hi3xxx_cpu_kill,
>> + .cpu_die = hi3620_cpu_die,
>> + .cpu_kill = hi3620_cpu_kill,
>> #endif
>> };
>>
>> @@ -181,6 +181,6 @@ static const struct smp_operations hip01_smp_ops __initconst = {
>> .smp_boot_secondary = hip01_boot_secondary,
>> };
>>
>> -CPU_METHOD_OF_DECLARE(hi3xxx_smp, "hisilicon,hi3620-smp", &hi3xxx_smp_ops);
>> +CPU_METHOD_OF_DECLARE(hi3620_smp, "hisilicon,hi3620-smp", &hi3620_smp_ops);
>> CPU_METHOD_OF_DECLARE(hix5hd2_smp, "hisilicon,hix5hd2-smp", &hix5hd2_smp_ops);
>> CPU_METHOD_OF_DECLARE(hip01_smp, "hisilicon,hip01-smp", &hip01_smp_ops);
>> diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
>> index e169ec7..2edf3b5 100644
>> --- a/drivers/clk/hisilicon/Makefile
>> +++ b/drivers/clk/hisilicon/Makefile
>> @@ -4,7 +4,7 @@
>>
>> obj-y += clk.o clkgate-separated.o clkdivider-hi6220.o
>>
>> -obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
>> +obj-$(CONFIG_ARCH_HI3620) += clk-hi3620.o
>> obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
>> obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
>> obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o
>> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
>> index 739f797..74bab9d0 100644
>> --- a/drivers/dma/Kconfig
>> +++ b/drivers/dma/Kconfig
>> @@ -279,7 +279,7 @@ config INTEL_MIC_X100_DMA
>>
>> config K3_DMA
>> tristate "Hisilicon K3 DMA support"
>> - depends on ARCH_HI3xxx
>> + depends on ARCH_HI3620
>> select DMA_ENGINE
>> select DMA_VIRTUAL_CHANNELS
>> help
>> --
>> 2.9.3
>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
I'm always willing to learn more, but as you mentioned, first time doing
this sort of thing.
Also, there is one area I'd simply like to reorder some struct
initialization so it matches the definition, iirc it was the struct
map_desc.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160830/808ac90f/attachment.sig>
More information about the linux-arm-kernel
mailing list