[PATCH 1/1] mach-hisi: Make Hi3620 explicit, remove wildcard
Marty Plummer
netz.kernel at gmail.com
Tue Aug 30 10:38:27 PDT 2016
Signed-off-by: Marty Plummer <netz.kernel at gmail.com>
---
arch/arm/Kconfig.debug | 2 +-
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/configs/hisi_defconfig | 2 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
arch/arm/mach-hisi/Kconfig | 6 +++---
arch/arm/mach-hisi/core.h | 10 +++++-----
arch/arm/mach-hisi/hisilicon.c | 4 ++--
arch/arm/mach-hisi/hotplug.c | 16 ++++++++--------
arch/arm/mach-hisi/platsmp.c | 24 ++++++++++++------------
drivers/clk/hisilicon/Makefile | 2 +-
drivers/dma/Kconfig | 2 +-
11 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a9693b6..9094ca6 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -280,7 +280,7 @@ choice
config DEBUG_HI3620_UART
bool "Hisilicon HI3620 Debug UART"
- depends on ARCH_HI3xxx
+ depends on ARCH_HI3620
select DEBUG_UART_PL01X
help
Say Y here if you want kernel low-level debugging support
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..7ffd3a3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -154,7 +154,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
-dtb-$(CONFIG_ARCH_HI3xxx) += \
+dtb-$(CONFIG_ARCH_HI3620) += \
hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += \
highbank.dtb \
diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig
index b2e340b..14c8da6 100644
--- a/arch/arm/configs/hisi_defconfig
+++ b/arch/arm/configs/hisi_defconfig
@@ -4,7 +4,7 @@ CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_RD_LZMA=y
CONFIG_ARCH_HISI=y
-CONFIG_ARCH_HI3xxx=y
+CONFIG_ARCH_HI3620=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_HIX5HD2=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 2c8665c..a63865e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -45,7 +45,7 @@ CONFIG_MACH_BERLIN_BG2Q=y
CONFIG_ARCH_DIGICOLOR=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_HISI=y
-CONFIG_ARCH_HI3xxx=y
+CONFIG_ARCH_HI3620=y
CONFIG_ARCH_HIX5HD2=y
CONFIG_ARCH_HIP01=y
CONFIG_ARCH_HIP04=y
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index a3b091a..08871e0 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -12,8 +12,8 @@ if ARCH_HISI
menu "Hisilicon platform type"
-config ARCH_HI3xxx
- bool "Hisilicon Hi36xx family"
+config ARCH_HI3620
+ bool "Hisilicon Hi3620 family"
depends on ARCH_MULTI_V7
select CACHE_L2X0
select HAVE_ARM_SCU if SMP
@@ -21,7 +21,7 @@ config ARCH_HI3xxx
select PINCTRL
select PINCTRL_SINGLE
help
- Support for Hisilicon Hi36xx SoC family
+ Support for Hisilicon Hi3620 SoC family
config ARCH_HIP01
bool "Hisilicon HIP01 family"
diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h
index e883583..cb7bc84 100644
--- a/arch/arm/mach-hisi/core.h
+++ b/arch/arm/mach-hisi/core.h
@@ -3,13 +3,13 @@
#include <linux/reboot.h>
-extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr);
-extern int hi3xxx_get_cpu_jump(int cpu);
+extern void hi3620_set_cpu_jump(int cpu, void *jump_addr);
+extern int hi3620_get_cpu_jump(int cpu);
extern void secondary_startup(void);
-extern void hi3xxx_cpu_die(unsigned int cpu);
-extern int hi3xxx_cpu_kill(unsigned int cpu);
-extern void hi3xxx_set_cpu(int cpu, bool enable);
+extern void hi3620_cpu_die(unsigned int cpu);
+extern int hi3620_cpu_kill(unsigned int cpu);
+extern void hi3620_set_cpu(int cpu, bool enable);
extern void hix5hd2_set_cpu(int cpu, bool enable);
extern void hix5hd2_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c
index c08c44e..0aea7e9 100644
--- a/arch/arm/mach-hisi/hisilicon.c
+++ b/arch/arm/mach-hisi/hisilicon.c
@@ -44,12 +44,12 @@ static void __init hi3620_map_io(void)
iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc));
}
-static const char *const hi3xxx_compat[] __initconst = {
+static const char *const hi3620_compat[] __initconst = {
"hisilicon,hi3620-hi4511",
NULL,
};
DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)")
.map_io = hi3620_map_io,
- .dt_compat = hi3xxx_compat,
+ .dt_compat = hi3620_compat,
MACHINE_END
diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c
index a129aae..f06b428 100644
--- a/arch/arm/mach-hisi/hotplug.c
+++ b/arch/arm/mach-hisi/hotplug.c
@@ -143,7 +143,7 @@ static void set_cpu_hi3620(int cpu, bool enable)
}
}
-static int hi3xxx_hotplug_init(void)
+static int hi3620_hotplug_init(void)
{
struct device_node *node;
@@ -157,10 +157,10 @@ static int hi3xxx_hotplug_init(void)
return -ENOENT;
}
-void hi3xxx_set_cpu(int cpu, bool enable)
+void hi3620_set_cpu(int cpu, bool enable)
{
if (!ctrl_base) {
- if (hi3xxx_hotplug_init() < 0)
+ if (hi3620_hotplug_init() < 0)
return;
}
@@ -262,24 +262,24 @@ static inline void cpu_enter_lowpower(void)
}
#ifdef CONFIG_HOTPLUG_CPU
-void hi3xxx_cpu_die(unsigned int cpu)
+void hi3620_cpu_die(unsigned int cpu)
{
cpu_enter_lowpower();
- hi3xxx_set_cpu_jump(cpu, phys_to_virt(0));
+ hi3620_set_cpu_jump(cpu, phys_to_virt(0));
cpu_do_idle();
/* We should have never returned from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
}
-int hi3xxx_cpu_kill(unsigned int cpu)
+int hi3620_cpu_kill(unsigned int cpu)
{
unsigned long timeout = jiffies + msecs_to_jiffies(50);
- while (hi3xxx_get_cpu_jump(cpu))
+ while (hi3620_get_cpu_jump(cpu))
if (time_after(jiffies, timeout))
return 0;
- hi3xxx_set_cpu(cpu, false);
+ hi3620_set_cpu(cpu, false);
return 1;
}
diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c
index e1d6764..e36783e 100644
--- a/arch/arm/mach-hisi/platsmp.c
+++ b/arch/arm/mach-hisi/platsmp.c
@@ -23,7 +23,7 @@
static void __iomem *ctrl_base;
-void hi3xxx_set_cpu_jump(int cpu, void *jump_addr)
+void hi3620_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = cpu_logical_map(cpu);
if (!cpu || !ctrl_base)
@@ -31,7 +31,7 @@ void hi3xxx_set_cpu_jump(int cpu, void *jump_addr)
writel_relaxed(virt_to_phys(jump_addr), ctrl_base + ((cpu - 1) << 2));
}
-int hi3xxx_get_cpu_jump(int cpu)
+int hi3620_get_cpu_jump(int cpu)
{
cpu = cpu_logical_map(cpu);
if (!cpu || !ctrl_base)
@@ -56,7 +56,7 @@ static void __init hisi_enable_scu_a9(void)
}
}
-static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
+static void __init hi3620_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *np = NULL;
u32 offset = 0;
@@ -81,20 +81,20 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus)
}
}
-static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int hi3620_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- hi3xxx_set_cpu(cpu, true);
- hi3xxx_set_cpu_jump(cpu, secondary_startup);
+ hi3620_set_cpu(cpu, true);
+ hi3620_set_cpu_jump(cpu, secondary_startup);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
-static const struct smp_operations hi3xxx_smp_ops __initconst = {
- .smp_prepare_cpus = hi3xxx_smp_prepare_cpus,
- .smp_boot_secondary = hi3xxx_boot_secondary,
+static const struct smp_operations hi3620_smp_ops __initconst = {
+ .smp_prepare_cpus = hi3620_smp_prepare_cpus,
+ .smp_boot_secondary = hi3620_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = hi3xxx_cpu_die,
- .cpu_kill = hi3xxx_cpu_kill,
+ .cpu_die = hi3620_cpu_die,
+ .cpu_kill = hi3620_cpu_kill,
#endif
};
@@ -181,6 +181,6 @@ static const struct smp_operations hip01_smp_ops __initconst = {
.smp_boot_secondary = hip01_boot_secondary,
};
-CPU_METHOD_OF_DECLARE(hi3xxx_smp, "hisilicon,hi3620-smp", &hi3xxx_smp_ops);
+CPU_METHOD_OF_DECLARE(hi3620_smp, "hisilicon,hi3620-smp", &hi3620_smp_ops);
CPU_METHOD_OF_DECLARE(hix5hd2_smp, "hisilicon,hix5hd2-smp", &hix5hd2_smp_ops);
CPU_METHOD_OF_DECLARE(hip01_smp, "hisilicon,hip01-smp", &hip01_smp_ops);
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
index e169ec7..2edf3b5 100644
--- a/drivers/clk/hisilicon/Makefile
+++ b/drivers/clk/hisilicon/Makefile
@@ -4,7 +4,7 @@
obj-y += clk.o clkgate-separated.o clkdivider-hi6220.o
-obj-$(CONFIG_ARCH_HI3xxx) += clk-hi3620.o
+obj-$(CONFIG_ARCH_HI3620) += clk-hi3620.o
obj-$(CONFIG_ARCH_HIP04) += clk-hip04.o
obj-$(CONFIG_ARCH_HIX5HD2) += clk-hix5hd2.o
obj-$(CONFIG_COMMON_CLK_HI3519) += clk-hi3519.o
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 739f797..74bab9d0 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -279,7 +279,7 @@ config INTEL_MIC_X100_DMA
config K3_DMA
tristate "Hisilicon K3 DMA support"
- depends on ARCH_HI3xxx
+ depends on ARCH_HI3620
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
--
2.9.3
More information about the linux-arm-kernel
mailing list