[PATCH v8 14/18] ARM: STi: DT: STiH407: Add uniperif player dt nodes

Lee Jones lee.jones at linaro.org
Tue Aug 30 03:02:58 PDT 2016


On Fri, 26 Aug 2016, Peter Griffin wrote:

> This patch adds the DT nodes for the uniperif player
> IP blocks found on STiH407 family silicon.
> 
> Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen at st.com>
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 76 +++++++++++++++++++++++++++++++++++
>  1 file changed, 76 insertions(+)

Same comments as in patch 14.

> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index d1258d5..d263c96 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -880,5 +880,81 @@
>  			status = "disabled";
>  			st,syscfg = <&syscfg_core>;
>  		};
> +
> +		sti_uni_player0: sti-uni-player at 0 {
> +			compatible = "st,sti-uni-player";
> +			status = "disabled";
> +			#sound-dai-cells = <0>;
> +			st,syscfg = <&syscfg_core>;
> +			clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
> +			assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
> +			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
> +			assigned-clock-rates = <50000000>;
> +			reg = <0x8D80000 0x158>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>;
> +			dmas = <&fdma0 2 0 1>;
> +			dai-name = "Uni Player #0 (HDMI)";
> +			dma-names = "tx";
> +			st,uniperiph-id = <0>;
> +			st,version = <5>;
> +			st,mode = "HDMI";
> +		};
> +
> +		sti_uni_player1: sti-uni-player at 1 {
> +			compatible = "st,sti-uni-player";
> +			status = "disabled";
> +			#sound-dai-cells = <0>;
> +			st,syscfg = <&syscfg_core>;
> +			clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
> +			assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
> +			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
> +			assigned-clock-rates = <50000000>;
> +			reg = <0x8D81000 0x158>;
> +			interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
> +			dmas = <&fdma0 3 0 1>;
> +			dai-name = "Uni Player #1 (PIO)";
> +			dma-names = "tx";
> +			st,uniperiph-id = <1>;
> +			st,version = <5>;
> +			st,mode = "PCM";
> +		};
> +
> +		sti_uni_player2: sti-uni-player at 2 {
> +			compatible = "st,sti-uni-player";
> +			status = "disabled";
> +			#sound-dai-cells = <0>;
> +			st,syscfg = <&syscfg_core>;
> +			clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
> +			assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
> +			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
> +			assigned-clock-rates = <50000000>;
> +			reg = <0x8D82000 0x158>;
> +			interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
> +			dmas = <&fdma0 4 0 1>;
> +			dai-name = "Uni Player #1 (DAC)";
> +			dma-names = "tx";
> +			st,uniperiph-id = <2>;
> +			st,version = <5>;
> +			st,mode = "PCM";
> +		};
> +
> +		sti_uni_player3: sti-uni-player at 3 {
> +			compatible = "st,sti-uni-player";
> +			status = "disabled";
> +			#sound-dai-cells = <0>;
> +			st,syscfg = <&syscfg_core>;
> +			clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
> +			assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
> +			assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
> +			assigned-clock-rates = <50000000>;
> +			reg = <0x8D85000 0x158>;
> +			interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
> +			dmas = <&fdma0 7 0 1>;
> +			dma-names = "tx";
> +			dai-name = "Uni Player #1 (PIO)";
> +			st,uniperiph-id = <3>;
> +			st,version = <5>;
> +			st,mode = "SPDIF";
> +		};
>  	};
>  };

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list