[PATCH v3 1/2] input: misc: Add generic input driver to read encoded GPIO lines
Dmitry Torokhov
dmitry.torokhov at gmail.com
Mon Aug 29 20:25:28 PDT 2016
On Mon, Aug 29, 2016 at 09:50:28AM +0530, Vignesh R wrote:
>
>
> On Thursday 25 August 2016 10:26 PM, Dmitry Torokhov wrote:
> > On Wed, Aug 24, 2016 at 01:28:58PM +0530, Vignesh R wrote:
> >> Add a driver to read group of GPIO lines and provide its status as a
> >> numerical value as input event to the system. This will help in
> >> interfacing devices, that can be connected over GPIOs, that provide
> >> input to the system by driving GPIO lines connected to them like a
> >> rotary dial or a switch.
> >>
> >> For example, a rotary switch can be connected to four GPIO lines. The
> >> status of the GPIO lines reflect the actual position of the rotary
> >> switch dial. For example, if dial points to 9, then the four GPIO lines
> >> connected to the switch will read HLLH(0b'1001 = 9). This value
> >> can be reported as an ABS_* event to the input subsystem.
> >>
> >> Signed-off-by: Vignesh R <vigneshr at ti.com>
> >> Acked-by: Rob Herring <robh at kernel.org>
> >> ---
> >>
> >> v3: Fix comments by Andrew and Dmitry
> >> Link to v2: https://lkml.org/lkml/2016/8/23/79
> >>
> >> .../devicetree/bindings/input/gpio-decoder.txt | 23 ++++
> >> drivers/input/misc/Kconfig | 12 ++
> >> drivers/input/misc/Makefile | 1 +
> >> drivers/input/misc/gpio_decoder.c | 134 +++++++++++++++++++++
> >> 4 files changed, 170 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/input/gpio-decoder.txt
> >> create mode 100644 drivers/input/misc/gpio_decoder.c
> >>
> >> diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt
> >> new file mode 100644
> >> index 000000000000..14a77fb96cf0
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt
> >> @@ -0,0 +1,23 @@
> >> +* GPIO Decoder DT bindings
> >> +
> >> +Required Properties:
> >> +- compatible: should be "gpio-decoder"
> >> +- gpios: a spec of gpios (at least two) to be decoded to a number with
> >> + first entry representing the MSB.
> >> +
> >> +Optional Properties:
> >> +- decoder-max-value: Maximum possible value that can be reported by
> >> + the gpios.
> >> +- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
> >> + Defaults to 0 (ABS_X).
> >> +
> >> +Example:
> >> + gpio-decoder0 {
> >> + compatible = "gpio-decoder";
> >> + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
> >> + <&pca9536 2 GPIO_ACTIVE_HIGH>,
> >> + <&pca9536 1 GPIO_ACTIVE_HIGH>,
> >> + <&pca9536 0 GPIO_ACTIVE_HIGH>;
> >> + linux,axis = <0>; /* ABS_X */
> >> + decoder-max-value = <9>;
> >> + };
> >> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> >> index efb0ca871327..7cdb89397d18 100644
> >> --- a/drivers/input/misc/Kconfig
> >> +++ b/drivers/input/misc/Kconfig
> >> @@ -292,6 +292,18 @@ config INPUT_GPIO_TILT_POLLED
> >> To compile this driver as a module, choose M here: the
> >> module will be called gpio_tilt_polled.
> >>
> >> +config INPUT_GPIO_DECODER
> >> + tristate "Polled GPIO Decoder Input driver"
> >> + depends on GPIOLIB || COMPILE_TEST
> >> + select INPUT_POLLDEV
> >> + help
> >> + Say Y here if you want driver to read status of multiple GPIO
> >> + lines and report the encoded value as an absolute integer to
> >> + input subsystem.
> >> +
> >> + To compile this driver as a module, choose M here: the module
> >> + will be called gpio_decoder.
> >> +
> >> config INPUT_IXP4XX_BEEPER
> >> tristate "IXP4XX Beeper support"
> >> depends on ARCH_IXP4XX
> >> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> >> index 6a1e5e20fc1c..0b6d025f0487 100644
> >> --- a/drivers/input/misc/Makefile
> >> +++ b/drivers/input/misc/Makefile
> >> @@ -35,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
> >> obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
> >> obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
> >> obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
> >> +obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
> >> obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
> >> obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
> >> obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> >> diff --git a/drivers/input/misc/gpio_decoder.c b/drivers/input/misc/gpio_decoder.c
> >> new file mode 100644
> >> index 000000000000..1c2191d4b143
> >> --- /dev/null
> >> +++ b/drivers/input/misc/gpio_decoder.c
> >> @@ -0,0 +1,134 @@
> >> +/*
> >> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> >> + *
> >> + * This program is free software; you can redistribute it and/or
> >> + * modify it under the terms of the GNU General Public License as
> >> + * published by the Free Software Foundation version 2.
> >> + *
> >> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> >> + * kind, whether express or implied; without even the implied warranty
> >> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> >> + * GNU General Public License for more details.
> >> + *
> >> + * A generic driver to read multiple gpio lines and translate the
> >> + * encoded numeric value into an input event.
> >> + */
> >> +
> >> +#include <linux/device.h>
> >> +#include <linux/gpio/consumer.h>
> >> +#include <linux/input.h>
> >> +#include <linux/input-polldev.h>
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/of.h>
> >> +#include <linux/platform_device.h>
> >> +
> >> +struct gpio_decoder {
> >> + struct input_polled_dev *poll_dev;
> >> + struct gpio_descs *input_gpios;
> >> + struct device *dev;
> >> + u32 axis;
> >> + u32 last_stable;
> >> +};
> >> +
> >> +static unsigned int gpio_decoder_get_gpios_state(struct gpio_decoder
> >> + *decoder)
> >> +{
> >> + struct gpio_descs *gpios = decoder->input_gpios;
> >> + unsigned int ret = 0;
> >> + int i, val;
> >> +
> >> + for (i = 0; i < gpios->ndescs; i++) {
> >> + val = gpiod_get_value_cansleep(gpios->desc[i]);
> >> + if (val >= 0) {
> >> + ret = (ret << 1) | !!val;
> >> + } else {
> >> + dev_err(decoder->dev, "Error reading gpio\n");
> >> + break;
> >
> > I think if we fail reading any one of gpio lines we should skip
> > reporting the event.
> >
>
> Ok.
>
> >> + }
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static void gpio_decoder_poll_gpios(struct input_polled_dev *poll_dev)
> >> +{
> >> + struct gpio_decoder *decoder = poll_dev->private;
> >> + unsigned int state = gpio_decoder_get_gpios_state(decoder);
> >> +
> >> + if (state != decoder->last_stable) {
> >> + input_report_abs(poll_dev->input, decoder->axis, state);
> >> + input_sync(poll_dev->input);
> >> + decoder->last_stable = state;
> >> + }
> >> +}
> >> +
> >> +static int gpio_decoder_probe(struct platform_device *pdev)
> >> +{
> >> + struct device *dev = &pdev->dev;
> >> + struct gpio_decoder *decoder;
> >> + struct input_polled_dev *poll_dev;
> >> + u32 max;
> >> + int err;
> >> +
> >> + decoder = devm_kzalloc(dev, sizeof(struct gpio_decoder), GFP_KERNEL);
> >> + if (!decoder)
> >> + return -ENOMEM;
> >> +
> >> + device_property_read_u32(dev, "linux,axis", &decoder->axis);
> >> + decoder->input_gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
> >> + if (IS_ERR(decoder->input_gpios)) {
> >> + dev_err(dev, "unable to acquire input gpios\n");
> >> + return PTR_ERR(decoder->input_gpios);
> >> + }
> >> + if (decoder->input_gpios->ndescs < 2) {
> >> + dev_err(dev, "not enough gpios found\n");
> >> + return -EINVAL;
> >> + }
> >> +
> >> + if (device_property_read_u32(dev, "decoder-max-value", &max))
> >> + max = BIT(decoder->input_gpios->ndescs);
> >
> > Shouldn't this be
> >
> > max = (1U << decoder->input_gpios->ndescs) - 1;
> >
> > ?
>
> Oops, you are right.
>
> >
> >> +
> >> + decoder->dev = dev;
> >> + poll_dev = devm_input_allocate_polled_device(decoder->dev);
> >> + if (!poll_dev)
> >> + return -ENOMEM;
> >> +
> >> + poll_dev->private = decoder;
> >> + poll_dev->poll = gpio_decoder_poll_gpios;
> >> + decoder->poll_dev = poll_dev;
> >> +
> >> + poll_dev->input->name = pdev->name;
> >> + poll_dev->input->id.bustype = BUS_HOST;
> >> + input_set_abs_params(poll_dev->input, decoder->axis, 0, max, 0, 1);
> >
> > Why do you need flat == 1? Do you actually use joydev for this device?
> >
>
> Sorry, I overlooked flat param when I copied this line from
> rotary-encoder.c.
>
> >> +
> >> + err = input_register_polled_device(poll_dev);
> >> + if (err) {
> >> + dev_err(dev, "failed to register polled device\n");
> >> + return err;
> >> + }
> >> + platform_set_drvdata(pdev, decoder);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +#ifdef CONFIG_OF
> >> +static const struct of_device_id gpio_decoder_of_match[] = {
> >> + { .compatible = "gpio-decoder", },
> >> + { },
> >> +};
> >> +MODULE_DEVICE_TABLE(of, gpio_decoder_of_match);
> >> +#endif
> >> +
> >> +static struct platform_driver gpio_decoder_driver = {
> >> + .probe = gpio_decoder_probe,
> >> + .driver = {
> >> + .name = "gpio-decoder",
> >> + .of_match_table = of_match_ptr(gpio_decoder_of_match),
> >> + }
> >> +};
> >> +module_platform_driver(gpio_decoder_driver);
> >> +
> >> +MODULE_DESCRIPTION("GPIO decoder input driver");
> >> +MODULE_AUTHOR("Vignesh R <vigneshr at ti.com>");
> >> +MODULE_LICENSE("GPL v2");
> >> --
> >> 2.9.2
> >>
> >
> > No need to resubmit, I can adjust on my side.
>
> Thanks a lot!
Applied, thank you.
DTS change should go through some other tree though.
--
Dmitry
More information about the linux-arm-kernel
mailing list