[PATCH 31/33] ARM: pxa/lubbock: convert PCMCIA to use MAX1600 driver
Russell King
rmk+kernel at armlinux.org.uk
Mon Aug 29 03:26:44 PDT 2016
As Lubbock now provides GPIOs via gpiolib for controlling the socket
power, we can use the MAX1600 driver. Switch Lubbock to use this
driver, which simplifies the code.
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
arch/arm/mach-pxa/lubbock.c | 16 ++++++
drivers/pcmcia/Kconfig | 1 +
drivers/pcmcia/sa1111_lubbock.c | 110 ++++++++--------------------------------
3 files changed, 38 insertions(+), 89 deletions(-)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e974d1eb0f88..8686c5d0dc3b 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -136,6 +136,20 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
// no D+ pullup; lubbock can't connect/disconnect in software
};
+/* GPIOs for SA1111 PCMCIA */
+static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
+ .dev_id = "1800",
+ .table = {
+ { "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
+ { "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
+ { "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
+ { "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
+ { "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
+ { "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
+ { },
+ },
+};
+
static struct resource sa1111_resources[] = {
[0] = {
.start = 0x10000000,
@@ -475,6 +489,8 @@ static void __init lubbock_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
+ gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
+
clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
pxa_set_udc_info(&udc_info);
pxa_set_fb_info(NULL, &sharp_lm8v31);
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index 1441c1945088..1b4b641a1e04 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -195,6 +195,7 @@ config PCMCIA_SA1111
select PCMCIA_SA11XX_BASE if ARCH_SA1100
select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111
select PCMCIA_MAX1600 if ASSABET_NEPONSET
+ select PCMCIA_MAX1600 if ARCH_LUBBOCK && SA1111
help
Say Y here to include support for SA1111-based PCMCIA or CF
sockets, found on the Jornada 720, Graphicsmaster and other
diff --git a/drivers/pcmcia/sa1111_lubbock.c b/drivers/pcmcia/sa1111_lubbock.c
index c5caf5790451..9d5ffc71ae51 100644
--- a/drivers/pcmcia/sa1111_lubbock.c
+++ b/drivers/pcmcia/sa1111_lubbock.c
@@ -24,20 +24,33 @@
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
-#include <mach/lubbock.h>
#include "sa1111_generic.h"
+#include "max1600.h"
+
+static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ struct sa1111_pcmcia_socket *s = to_skt(skt);
+ struct max1600 *m;
+ int ret;
+
+ ret = max1600_init(skt->socket.dev.parent, &m,
+ skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
+ MAX1600_CODE_HIGH);
+ if (ret == 0)
+ s->driver_data = m;
+
+ return ret;
+}
static int
lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned int pa_dwr_mask, pa_dwr_set, misc_mask, misc_set;
+ struct max1600 *m = s->driver_data;
int ret = 0;
- pa_dwr_mask = pa_dwr_set = misc_mask = misc_set = 0;
-
/* Lubbock uses the Maxim MAX1602, with the following connections:
*
* Socket 0 (PCMCIA):
@@ -71,74 +84,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
again:
switch (skt->nr) {
case 0:
- pa_dwr_mask = GPIO_A0 | GPIO_A1 | GPIO_A2 | GPIO_A3;
-
- switch (state->Vcc) {
- case 0: /* Hi-Z */
- break;
-
- case 33: /* VY */
- pa_dwr_set |= GPIO_A3;
- break;
-
- case 50: /* VX */
- pa_dwr_set |= GPIO_A2;
- break;
-
- default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __func__, state->Vcc);
- ret = -1;
- }
-
- switch (state->Vpp) {
- case 0: /* Hi-Z */
- break;
-
- case 120: /* 12IN */
- pa_dwr_set |= GPIO_A1;
- break;
-
- default: /* VCC */
- if (state->Vpp == state->Vcc)
- pa_dwr_set |= GPIO_A0;
- else {
- printk(KERN_ERR "%s(): unrecognized Vpp %u\n",
- __func__, state->Vpp);
- ret = -1;
- break;
- }
- }
- break;
-
case 1:
- misc_mask = (1 << 15) | (1 << 14);
-
- switch (state->Vcc) {
- case 0: /* Hi-Z */
- break;
-
- case 33: /* VY */
- misc_set |= 1 << 15;
- break;
-
- case 50: /* VX */
- misc_set |= 1 << 14;
- break;
-
- default:
- printk(KERN_ERR "%s(): unrecognized Vcc %u\n",
- __func__, state->Vcc);
- ret = -1;
- break;
- }
-
- if (state->Vpp != state->Vcc && state->Vpp != 0) {
- printk(KERN_ERR "%s(): CF slot cannot support Vpp %u\n",
- __func__, state->Vpp);
- ret = -1;
- break;
- }
break;
default:
@@ -147,11 +93,8 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
if (ret == 0)
ret = sa1111_pcmcia_configure_socket(skt, state);
-
- if (ret == 0) {
- lubbock_set_misc_wr(misc_mask, misc_set);
- sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
- }
+ if (ret == 0)
+ ret = max1600_configure(m, state->Vcc, state->Vpp);
#if 1
if (ret == 0 && state->Vcc == 33) {
@@ -175,8 +118,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
/*
* Switch to 5V, Configure socket with 5V voltage
*/
- lubbock_set_misc_wr(misc_mask, 0);
- sa1111_set_io(s->dev, pa_dwr_mask, 0);
+ max1600_configure(m, 0, 0);
/*
* It takes about 100ms to turn off Vcc.
@@ -201,6 +143,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
static struct pcmcia_low_level lubbock_pcmcia_ops = {
.owner = THIS_MODULE,
+ .hw_init = lubbock_pcmcia_hw_init,
.configure_socket = lubbock_pcmcia_configure_socket,
.first = 0,
.nr = 2,
@@ -213,17 +156,6 @@ int pcmcia_lubbock_init(struct sa1111_dev *sadev)
int ret = -ENODEV;
if (machine_is_lubbock()) {
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
-
- /* Set CF Socket 1 power to standby mode. */
- lubbock_set_misc_wr((1 << 15) | (1 << 14), 0);
-
pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
pxa2xx_configure_sockets(&sadev->dev);
ret = sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
--
2.1.0
More information about the linux-arm-kernel
mailing list