[PATCH v3 0/5] meson: Meson8b and GXBB DWMAC glue driver

[Martin Blumenstingl]

This adds a DWMAC glue driver for the PRG_ETHERNET registers found in
Meson8b and GXBB SoCs. Based on the "old" meson6b-dwmac glue driver
the register layout is completely different.
Thus I introduced a separate driver.


Changes since v2:
- fixed unloading the glue driver when built as module. This pulls in a
  patch from Joachim Eastwood (thanks) to get our private data structure
  (bsp_priv).

Joachim Eastwood (1):
  stmmac: introduce get_stmmac_bsp_priv() helper

Martin Blumenstingl (4):
  net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
  clk: gxbb: expose MPLL2 clock for use by DT
  net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
  ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver

 .../devicetree/bindings/net/meson-dwmac.txt        |  45 ++-
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   8 +-
 drivers/clk/meson/gxbb.h                           |   2 +-
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c    | 327 +++++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_platform.h  |   8 +
 include/dt-bindings/clock/gxbb-clkc.h              |   1 +
 7 files changed, 380 insertions(+), 13 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c

-- 
2.9.3