[PATCH 4/8] ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h

[Maxime Ripard]

On Tue, Aug 23, 2016 at 05:59:50PM +0200, Hans de Goede wrote:
> Hi,
> 
> On 08/23/2016 05:17 PM, Maxime Ripard wrote:
> >On Tue, Aug 23, 2016 at 11:39:06AM +0200, Hans de Goede wrote:
> >>Hi,
> >>
> >>On 23-08-16 11:26, Maxime Ripard wrote:
> >>>On Mon, Aug 22, 2016 at 09:03:57PM +0200, Hans de Goede wrote:
> >>>>Hi,
> >>>>
> >>>>On 22-08-16 20:30, Maxime Ripard wrote:
> >>>>>On Mon, Aug 08, 2016 at 09:43:14PM +0200, Hans de Goede wrote:
> >>>>>>The gt90h tablet has a gsl3675 touchscreen, add a dt node describing it.
> >>>>>>
> >>>>>>Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> >>>>>>---
> >>>>>>arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts | 8 ++++++++
> >>>>>>1 file changed, 8 insertions(+)
> >>>>>>
> >>>>>>diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
> >>>>>>index f27ebbb..da55b5a 100644
> >>>>>>--- a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
> >>>>>>+++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
> >>>>>>@@ -53,6 +53,14 @@
> >>>>>>	status = "okay";
> >>>>>>};
> >>>>>>
> >>>>>>+&gsl1680 {
> >>>>>>+	compatible = "silead,gsl3675";
> >>>>>>+	touchscreen-fw-name = "silead/gsl3675-gt90h.fw";
> >>>>>
> >>>>>That's not documented anywhere, and looks really suspicious.
> >>>>
> >>>>Ugh, that should have been in:
> >>>>
> >>>>Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
> >>>>
> >>>>But somehow it is not (I believe it was there in earlier revisions of
> >>>>the patch), I'll send a patch to fix this.
> >>>>
> >>>>About it being suspicious, this is not really firmware it is a bunch
> >>>>of configuration data / lookup tables for the controller which tell
> >>>>it in which order the touchscreen horizontal / vertical sensor
> >>>>lines are connected to its sense pins, and what values to send
> >>>>for finger x% between line z and line z+1, which differs per
> >>>>tablet model, since not all tablets use the same digitizer.
> >>>
> >>>It's not really the firmware itself that I find suspicious, but more
> >>>the encoding of a path to a file in the DT,
> >>
> >>It is not a path it is a filename. We could drop the "silead/" prefix
> >>and put that in the driver instead to really make it a filename.
> >>
> >>>especially when you can
> >>>apparently derive it from other informations already found in the DT
> >>>(<vendor>/<compatible>-<board>.fw)
> >>
> >>That will not work, sometimes different boards use the same digitizer
> >>and thus the same firmware. Also in case of the q8 tablets, we need
> >>different firmware for different variants (this is to be dealt with
> >>by the q8-hardware-manager I'm working on), since although they
> >>all use the same digitizer they do not wire it up to the controllers
> >>pins the same in all models, so we need different firmware files
> >>corresponding to different wirings.
> >>
> >>TL;DR: There is no 1:1 mapping between board and the firmware filename.
> >
> >The point still holds. It's exactly the same case than the broadcom
> >nvram filename discussion, and it raised the same issues.
> 
> No it is not, in this case we also want to be able to specify
> different fw names on devices using the same base dts, here
> is a tablet for all the q8 tablets with gsl1680 I've:

At least two other dev told you exactly that in that thread though:
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/439978.html
http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/440024.html

> 
> a13-94v-0:		a082 a23-tj-a23-q88-v4.0_20140815/GSL1680E_700_FW.fw	1024x600 inverted-x
> a13-tzx-713b-v2.1:	a082 a23-tj-a23-q88-v4.0_20140815/GSL1680E_700_FW.fw	1024x600
> a23-q8h-v3:		a082 a23-tj-a23-q88-v4.0_20140815/GSL1688_A70_FW.fw	 800x480 swapped-x-y
> a23-tj-a23-q88-v4.0:	a082 a23-tj-a23-q88-v4.0_20140815/GSL1680E_700_FW.fw	1024x600
> a23-tw-ao721-v41:	a082 a23-tj-a23-q88-v4.0_20140815/GSL1680E_700_FW.fw	1024x600 inverted-x
> a23-ippo-q8h-v1.2:	a082 a23-tj-a23-q88-v4.0_20140815/GSL1688_A70_FW.fw	 800x480 swapped-x-y
> a33-ippo-q8h-v1.2:	a082 a23-tj-a23-q88-v4.0_20140815/GSL1688_A70_FW.fw	 800x480 swapped-x-y
> a33-tzx-723q4:		b482 a33-Q8_V2.4_1118/GSL1680_FW_D702.fw		 960x640 inverted-x
> a33-q8-v2.4-1118:	b482 a33-Q8_V2.4_1118/GSL1680_FW_D702.fw		 960x640
> a33-q8h-v1.5:		b482 a33-q8h-v1.5/GSL1688_A70_FW.fw			 960x640
> 
> I'm working on a q8hardware-mgr (inspired by the beagle bone cape mgr)
> to automatically detect the touchscreen controller as well as the controller id
> (the 2nd column above), and it will need to set a filename for the firmware
> file based on this, deriving this from the machine compatible will
> simply not work here.

I'm not sure why we need to stick to some insane naming scheme. Or why
can't we use symlinks.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160826/a8242ec7/attachment.sig>