[PATCH v2 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board

[Krzysztof Kozlowski]

On Fri, Aug 26, 2016 at 06:32:36PM +0200, Krzysztof Kozlowski wrote:
> On Wed, Aug 24, 2016 at 10:49:10PM +0900, Chanwoo Choi wrote:
> > This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board.
> > This board fully support the all things for mobile target.
> > 
> > This patch supports the following devices:
> > 1. basic SoC
> > - Initial booting for Samsung Exynos5433 SoC
> > - DRAM LPDDR3 (3GB)
> > - eMMC (32GB)
> > - ARM architecture timer
> > 
> > 2. power management devices
> > - Sasmung S2MPS13 PMIC for the power supply
> > - CPUFREQ for big.LITTLE cores
> > - TMU for big.LITTLE cores and GPU
> > - ADC with thermistor to measure the temperature of AP/Battery/Charger
> > - Maxim MAX77843 Interface PMIC (MUIC/Haptic/Regulator)
> > 
> > 3. sound devices
> > - I2S for sound bus
> > - LPASS for sound power control
> > - Wolfson WM5110 for sound codec
> > - Maxim MAX98504 for speaker amplifier
> > - TM2 ASoC Machine device driver node
> > 
> > 3. display devices
> > - DECON, DSI and MIC for the panel output
> > 
> > 4. usb devices
> > - USB 3.0 DRD (Dual Role Device)
> > - USB 3.0 Host controller
> > 
> > 5. storage devices
> > - MSHC (Mobile Storae Host Controller) for eMMC device
> 
> Not fixed. Mobile Storage.
> 
> Everything else looks fine, so fix above only if you are going to resend
> everything. If there won't be resend, I can fix it when applying.

Ah, I saw the kbuild report. The patchset needs a resend fixing this -
spit the makefile change into two.


Best regards,
Krzysztof