[PATCH v4 02/16] dt/bindings: Update binding for PM domain idle states

[Lina Iyer]

From: Axel Haslam <ahaslam+renesas at baylibre.com>

Update DT bindings to describe idle states of PM domains.

Cc: <devicetree at vger.kernel.org>
Signed-off-by: Marc Titinger <mtitinger+renesas at baylibre.com>
Signed-off-by: Lina Iyer <lina.iyer at linaro.org>
[Lina: Added state properties, removed state names, wakeup-latency,
added of_pm_genpd_init() API, pruned commit text]
Signed-off-by: Ulf Hansson <ulf.hansson at linaro.org>
[Ulf: Moved around code to make it compile properly, rebased on top of multiple state support]
---
 .../devicetree/bindings/power/power_domain.txt     | 57 ++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 025b5e7..4960486 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -29,6 +29,10 @@ Optional properties:
    specified by this binding. More details about power domain specifier are
    available in the next section.
 
+- domain-idle-states : A phandle of an idle-state that shall be soaked into a
+                generic domain power state. The idle state definitions are
+                compatible with arm,idle-state specified in [1].
+
 Example:
 
 	power: power-controller at 12340000 {
@@ -59,6 +63,57 @@ The nodes above define two power controllers: 'parent' and 'child'.
 Domains created by the 'child' power controller are subdomains of '0' power
 domain provided by the 'parent' power controller.
 
+Example 3: ARM v7 style CPU PM domains (Linux domain controller)
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7", "arm,armv7";
+			reg = <0x0>;
+			power-domains = <&a7_pd>;
+		};
+
+		CPU1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15", "arm,armv7";
+			reg = <0x0>;
+			power-domains = <&a15_pd>;
+		};
+	};
+
+	pm-domains {
+		a15_pd: a15_pd {
+			/* will have A15 platform ARM_PD_METHOD_OF_DECLARE*/
+			compatible = "arm,cortex-a15";
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
+
+		a7_pd: a7_pd {
+			/* will have a A7 platform ARM_PD_METHOD_OF_DECLARE*/
+			compatible = "arm,cortex-a7";
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
+		};
+
+		CLUSTER_SLEEP_0: state0 {
+			compatible = "arm,idle-state";
+			entry-latency-us = <1000>;
+			exit-latency-us = <2000>;
+			min-residency-us = <10000>;
+		};
+
+		CLUSTER_SLEEP_1: state1 {
+			compatible = "arm,idle-state";
+			entry-latency-us = <5000>;
+			exit-latency-us = <5000>;
+			min-residency-us = <100000>;
+		};
+	};
+
 ==PM domain consumers==
 
 Required properties:
@@ -76,3 +131,5 @@ Example:
 The node above defines a typical PM domain consumer device, which is located
 inside a PM domain with index 0 of a power controller represented by a node
 with the label "power".
+
+[1]. Documentation/devicetree/bindings/arm/idle-states.txt
-- 
2.7.4