[PATCH 2/3] dt-bindings: genpd: Add K2G device definitions
Ulf Hansson
ulf.hansson at linaro.org
Thu Aug 25 00:32:47 PDT 2016
On 20 August 2016 at 01:56, Nishanth Menon <nm at ti.com> wrote:
> From: Dave Gerlach <d-gerlach at ti.com>
>
> Provide macros representing each devices index as understood by TI
> SCI to be used in the device node power-domain references. These
> are identifiers for the K2G devices managed by the PMMC. Includes
> contributions from Peter Ujfalusi <peter.ujfalusi at ti.com>
>
> Signed-off-by: Keerthy <j-keerthy at ti.com>
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
> Signed-off-by: Nishanth Menon <nm at ti.com>
I would squash this change into patch 1/3, as the DT documentation
patch refers to dt-bindings/genpd/k2g.h which is added in @subject
patch.
Otherwise feel free to add my tag below, which applied to patch 1/3 as well.
Reviewed-by: Ulf Hansson <ulf.hansson at linaro.org>
Kind regards
Uffe
> ---
> MAINTAINERS | 1 +
> include/dt-bindings/genpd/k2g.h | 90 +++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 91 insertions(+)
> create mode 100644 include/dt-bindings/genpd/k2g.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 657fb6a10286..ea14b08c30bb 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11574,6 +11574,7 @@ F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
> F: drivers/firmware/ti_sci*
> F: include/linux/soc/ti/ti_sci_protocol.h
> F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> +F: include/dt-bindings/genpd/k2g.h
>
> THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
> M: Hans Verkuil <hverkuil at xs4all.nl>
> diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
> new file mode 100644
> index 000000000000..91ad827e0ca1
> --- /dev/null
> +++ b/include/dt-bindings/genpd/k2g.h
> @@ -0,0 +1,90 @@
> +/*
> + * TI K2G SoC Device definitions
> + *
> + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _DT_BINDINGS_GENPD_K2G_H
> +#define _DT_BINDINGS_GENPD_K2G_H
> +
> +/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
> +
> +#define K2G_DEV_PMMC0 0x0000
> +#define K2G_DEV_MLB0 0x0001
> +#define K2G_DEV_DSS0 0x0002
> +#define K2G_DEV_MCBSP0 0x0003
> +#define K2G_DEV_MCASP0 0x0004
> +#define K2G_DEV_MCASP1 0x0005
> +#define K2G_DEV_MCASP2 0x0006
> +#define K2G_DEV_DCAN0 0x0008
> +#define K2G_DEV_DCAN1 0x0009
> +#define K2G_DEV_EMIF0 0x000a
> +#define K2G_DEV_MMCHS0 0x000b
> +#define K2G_DEV_MMCHS1 0x000c
> +#define K2G_DEV_GPMC0 0x000d
> +#define K2G_DEV_ELM0 0x000e
> +#define K2G_DEV_SPI0 0x0010
> +#define K2G_DEV_SPI1 0x0011
> +#define K2G_DEV_SPI2 0x0012
> +#define K2G_DEV_SPI3 0x0013
> +#define K2G_DEV_ICSS0 0x0014
> +#define K2G_DEV_ICSS1 0x0015
> +#define K2G_DEV_USB0 0x0016
> +#define K2G_DEV_USB1 0x0017
> +#define K2G_DEV_NSS0 0x0018
> +#define K2G_DEV_PCIE0 0x0019
> +#define K2G_DEV_GPIO0 0x001b
> +#define K2G_DEV_GPIO1 0x001c
> +#define K2G_DEV_TIMER64_0 0x001d
> +#define K2G_DEV_TIMER64_1 0x001e
> +#define K2G_DEV_TIMER64_2 0x001f
> +#define K2G_DEV_TIMER64_3 0x0020
> +#define K2G_DEV_TIMER64_4 0x0021
> +#define K2G_DEV_TIMER64_5 0x0022
> +#define K2G_DEV_TIMER64_6 0x0023
> +#define K2G_DEV_MSGMGR0 0x0025
> +#define K2G_DEV_BOOTCFG0 0x0026
> +#define K2G_DEV_ARM_BOOTROM0 0x0027
> +#define K2G_DEV_DSP_BOOTROM0 0x0029
> +#define K2G_DEV_DEBUGSS0 0x002b
> +#define K2G_DEV_UART0 0x002c
> +#define K2G_DEV_UART1 0x002d
> +#define K2G_DEV_UART2 0x002e
> +#define K2G_DEV_EHRPWM0 0x002f
> +#define K2G_DEV_EHRPWM1 0x0030
> +#define K2G_DEV_EHRPWM2 0x0031
> +#define K2G_DEV_EHRPWM3 0x0032
> +#define K2G_DEV_EHRPWM4 0x0033
> +#define K2G_DEV_EHRPWM5 0x0034
> +#define K2G_DEV_EQEP0 0x0035
> +#define K2G_DEV_EQEP1 0x0036
> +#define K2G_DEV_EQEP2 0x0037
> +#define K2G_DEV_ECAP0 0x0038
> +#define K2G_DEV_ECAP1 0x0039
> +#define K2G_DEV_I2C0 0x003a
> +#define K2G_DEV_I2C1 0x003b
> +#define K2G_DEV_I2C2 0x003c
> +#define K2G_DEV_EDMA0 0x003f
> +#define K2G_DEV_SEMAPHORE0 0x0040
> +#define K2G_DEV_INTC0 0x0041
> +#define K2G_DEV_GIC0 0x0042
> +#define K2G_DEV_QSPI0 0x0043
> +#define K2G_DEV_ARM_64B_COUNTER0 0x0044
> +#define K2G_DEV_TETRIS0 0x0045
> +#define K2G_DEV_CGEM0 0x0046
> +#define K2G_DEV_MSMC0 0x0047
> +#define K2G_DEV_CBASS0 0x0049
> +#define K2G_DEV_BOARD0 0x004c
> +#define K2G_DEV_EDMA1 0x004f
> +
> +#endif
> --
> 2.9.1.200.gb1ec08f
>
More information about the linux-arm-kernel
mailing list