[PATCH v2 0/7] arm64: dts: Add the dts file for Exynos5433 and TM/TM2E board

[Chanwoo Choi]

This patchset adds the Device Tree file for Samsung 64-bit Exynos5433 SoC
and TM/TM2E board based on Exynos5433. The Exynos5433 has Octa-core CPUs
(quad Cortex-A57 and quad Cortex-A53). The TM2 and TM2E are the Samsung board
based on Exynos5433 SoC.

I sent the Exynos5433 patches[2]. But it was not merged because of sending
the only SoC dtsi patch without board patches. So, I again send the Exynos5433
SoC patches with TM2/TM2E board dts files.

When making the patches, I get the guide from Krzysztof (Exynos SoC maintainer).
The maintainer requires that already developed and verified work should merge
them as one patch. So, this patchset include only three patches for Exynos5433
dtsi, TM2 dts and TM2E dts file.

I tested the display controller by using the modetest tool.
But, Samsung s6e3ha2 panel driver has not yet posted. So, the TM2 dts file
don't include the panel Device Tree node. I'll post the s6e3ha2 panel driver
on separate patch with a dt patch.

Changes from v1:
(https://lkml.org/lkml/2016/8/16/61)
- Merge the cpufreq patch for exynos5433[3] on PM/cpufreq tree.
- Add new patch to support the multiple IORESOURCE_MAP for samsung pinctrl driver.
- Drop the SYSMMU Device-Tree node which will be posted by Marek Szyprowski.
- Fix the code clean issue by Krzysztof Kozlowski and Rob Herring's comment.
- Delete the unnecessary alias from exynos5433-tm2.dts.
- Expand the range of cooling level of CPU device.
- Update the binding method of 'Exynos5433 audio subsystem'

Depends on:
This patchset are based on v4.8-rc3[1] and TM2 sound patches[2].

[1] v4.8-rc3
[2] http://lkml.org/lkml/2015/3/17/843
  : [PATCH v7 0/9] arm64: Add the support for new Exynos5433 SoC
[3] https://lkml.org/lkml/2016/8/16/64
  : [PATCH 3/7] cpufreq: dt: Add exynos5433 compatible to use generic cpufreq driver

Chanwoo Choi (6):
  clocksource: exynos_mct: Add the support for ARM64
  Documentation: bindings: Add Exynos5433 PMU compatible
  pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank
  arm64: dts: exynos: Add dts files for Samsung Exynos5433 64bit SoC
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
  arm64: dts: exynos: Add dts file for Exynos5433-based TM2E board

Joonyoung Shim (1):
  pinctrl: samsung: Add GPF support for Exynos5433

 .../devicetree/bindings/arm/samsung/pmu.txt        |    1 +
 .../bindings/arm/samsung/samsung-boards.txt        |    2 +
 .../bindings/pinctrl/samsung-pinctrl.txt           |   18 +
 arch/arm64/boot/dts/exynos/Makefile                |    5 +-
 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi |  792 ++++++++++++
 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts      |  985 +++++++++++++++
 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts     |   41 +
 .../dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi |   23 +
 .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi     |   22 +
 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi     |  306 +++++
 arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 1327 ++++++++++++++++++++
 drivers/clocksource/Kconfig                        |    2 +-
 drivers/clocksource/exynos_mct.c                   |    4 +
 drivers/pinctrl/samsung/pinctrl-exynos.c           |   52 +-
 drivers/pinctrl/samsung/pinctrl-exynos.h           |   47 +-
 drivers/pinctrl/samsung/pinctrl-samsung.c          |   55 +-
 drivers/pinctrl/samsung/pinctrl-samsung.h          |    7 +-
 17 files changed, 3646 insertions(+), 43 deletions(-)
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi
 create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi

-- 
1.9.1