[PATCH 04/10] reset: meson: add driver Kconfig option

[Neil Armstrong]

On 08/24/2016 03:28 PM, Philipp Zabel wrote:
> Visible only if COMPILE_TEST is enabled, this allows to include the
> driver in build tests.
> 
> Cc: Neil Armstrong <narmstrong at baylibre.com>
> Signed-off-by: Philipp Zabel <p.zabel at pengutronix.de>
> ---
>  drivers/reset/Kconfig  | 6 ++++++
>  drivers/reset/Makefile | 2 +-
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 8e33de2..fdf942d 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -34,6 +34,12 @@ config RESET_LPC18XX
>  	  This enables the LPC18xx/43 reset driver that supports the reset
>  	  controllers on AR71xx SoCs.
>  
> +config RESET_MESON
> +	bool "Meson Reset Driver" if COMPILE_TEST
> +	default ARCH_MESON
> +	help
> +	  This enables the reset driver for Amlogic Meson SoCs.
> +
>  config RESET_OXNAS
>  	bool
>  
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 25aa05a..1408cba 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -1,7 +1,6 @@
>  obj-y += core.o
>  obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
>  obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o
> -obj-$(CONFIG_ARCH_MESON) += reset-meson.o
>  obj-$(CONFIG_ARCH_STM32) += reset-stm32.o
>  obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
>  obj-$(CONFIG_ARCH_STI) += sti/
> @@ -10,6 +9,7 @@ obj-$(CONFIG_ARCH_ZYNQ) += reset-zynq.o
>  obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
>  obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
>  obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> +obj-$(CONFIG_RESET_MESON) += reset-meson.o
>  obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
>  obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
>  obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
> 


Acked-by: Neil Armstrong <narmstrong at baylibre.com>