[PATCH v2 0/4] meson: Meson8b and GXBB DWMAC glue driver

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sat Aug 20 02:35:34 PDT 2016


This adds a DWMAC glue driver for the PRG_ETHERNET registers found in
Meson8b and GXBB SoCs. Based on the "old" meson6b-dwmac glue driver
the register layout is completely different.
Thus I introduced a separate driver.

Changes since v1:
- make clkin1 mandatory because the internal mux expects two clocks
  (in other words: this makes the driver consistent with how the
  hardware actually works)
- expose the MPLL2 clock for use by DT so we can pass it to the ethmac
- added a .remove function to the glue driver which disables and
  unprepares the clocks on driver removal


Martin Blumenstingl (4):
  net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
  clk: gxbb: expose MPLL2 clock for use by DT
  net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
  ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver

 .../devicetree/bindings/net/meson-dwmac.txt        |  45 ++-
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   8 +-
 drivers/clk/meson/gxbb.h                           |   2 +-
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c    | 329 +++++++++++++++++++++
 include/dt-bindings/clock/gxbb-clkc.h              |   1 +
 6 files changed, 374 insertions(+), 13 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c

-- 
2.9.3




More information about the linux-arm-kernel mailing list