[PATCH V2 7/7] thermal: qoriq: Add thermal management support
Zhang Rui
rui.zhang at intel.com
Fri Aug 19 05:39:30 PDT 2016
On 四, 2016-06-30 at 11:08 +0800, Jia Hongtao wrote:
> This driver add thermal management support by enabling TMU (Thermal
> Monitoring Unit) on QorIQ platform.
>
> It's based on thermal of framework:
> - Trip points defined in device tree.
> - Cpufreq as cooling device registered in qoriq cpufreq driver.
>
> Signed-off-by: Jia Hongtao <hongtao.jia at nxp.com>
The patch looks good to me.
I only need to take this patch, right?
thanks,
rui
> ---
> Changes of V2:
> * Add HAS_IOMEM dependency to fix build error on UM
>
> drivers/thermal/Kconfig | 10 ++
> drivers/thermal/Makefile | 1 +
> drivers/thermal/qoriq_thermal.c | 328
> ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 339 insertions(+)
> create mode 100644 drivers/thermal/qoriq_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 2d702ca..56ef30d 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -195,6 +195,16 @@ config IMX_THERMAL
> cpufreq is used as the cooling device to throttle CPUs
> when the
> passive trip is crossed.
>
> +config QORIQ_THERMAL
> + tristate "QorIQ Thermal Monitoring Unit"
> + depends on THERMAL_OF
> + depends on HAS_IOMEM
> + help
> + Support for Thermal Monitoring Unit (TMU) found on QorIQ
> platforms.
> + It supports one critical trip point and one passive trip
> point. The
> + cpufreq is used as the cooling device to throttle CPUs
> when the
> + passive trip is crossed.
> +
> config SPEAR_THERMAL
> tristate "SPEAr thermal sensor driver"
> depends on PLAT_SPEAR || COMPILE_TEST
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 10b07c1..6662232 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) +=
> db8500_thermal.o
> obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
> obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
> obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
> obj-$(CONFIG_DB8500_CPUFREQ_COOLING) +=
> db8500_cpufreq_cooling.o
> obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
> obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
> diff --git a/drivers/thermal/qoriq_thermal.c
> b/drivers/thermal/qoriq_thermal.c
> new file mode 100644
> index 0000000..644ba52
> --- /dev/null
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -0,0 +1,328 @@
> +/*
> + * Copyright 2016 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> License for
> + * more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/thermal.h>
> +
> +#include "thermal_core.h"
> +
> +#define SITES_MAX 16
> +
> +/*
> + * QorIQ TMU Registers
> + */
> +struct qoriq_tmu_site_regs {
> + u32 tritsr; /* Immediate Temperature Site
> Register */
> + u32 tratsr; /* Average Temperature Site
> Register */
> + u8 res0[0x8];
> +};
> +
> +struct qoriq_tmu_regs {
> + u32 tmr; /* Mode Register */
> +#define TMR_DISABLE 0x0
> +#define TMR_ME 0x80000000
> +#define TMR_ALPF 0x0c000000
> + u32 tsr; /* Status Register */
> + u32 tmtmir; /* Temperature measurement
> interval Register */
> +#define TMTMIR_DEFAULT 0x0000000f
> + u8 res0[0x14];
> + u32 tier; /* Interrupt Enable Register */
> +#define TIER_DISABLE 0x0
> + u32 tidr; /* Interrupt Detect Register */
> + u32 tiscr; /* Interrupt Site Capture Register
> */
> + u32 ticscr; /* Interrupt Critical Site
> Capture Register */
> + u8 res1[0x10];
> + u32 tmhtcrh; /* High Temperature Capture
> Register */
> + u32 tmhtcrl; /* Low Temperature Capture
> Register */
> + u8 res2[0x8];
> + u32 tmhtitr; /* High Temperature Immediate
> Threshold */
> + u32 tmhtatr; /* High Temperature Average
> Threshold */
> + u32 tmhtactr; /* High Temperature Average Crit
> Threshold */
> + u8 res3[0x24];
> + u32 ttcfgr; /* Temperature Configuration
> Register */
> + u32 tscfgr; /* Sensor Configuration Register
> */
> + u8 res4[0x78];
> + struct qoriq_tmu_site_regs site[SITES_MAX];
> + u8 res5[0x9f8];
> + u32 ipbrr0; /* IP Block Revision Register 0
> */
> + u32 ipbrr1; /* IP Block Revision Register 1
> */
> + u8 res6[0x310];
> + u32 ttr0cr; /* Temperature Range 0 Control
> Register */
> + u32 ttr1cr; /* Temperature Range 1 Control
> Register */
> + u32 ttr2cr; /* Temperature Range 2 Control
> Register */
> + u32 ttr3cr; /* Temperature Range 3 Control
> Register */
> +};
> +
> +/*
> + * Thermal zone data
> + */
> +struct qoriq_tmu_data {
> + struct thermal_zone_device *tz;
> + struct qoriq_tmu_regs __iomem *regs;
> + int sensor_id;
> + bool little_endian;
> +};
> +
> +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void
> __iomem *addr)
> +{
> + if (p->little_endian)
> + iowrite32(val, addr);
> + else
> + iowrite32be(val, addr);
> +}
> +
> +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr)
> +{
> + if (p->little_endian)
> + return ioread32(addr);
> + else
> + return ioread32be(addr);
> +}
> +
> +static int tmu_get_temp(void *p, int *temp)
> +{
> + u32 val;
> + struct qoriq_tmu_data *data = p;
> +
> + val = tmu_read(data, &data->regs->site[data-
> >sensor_id].tritsr);
> + *temp = (val & 0xff) * 1000;
> +
> + return 0;
> +}
> +
> +static int qoriq_tmu_get_sensor_id(void)
> +{
> + int ret, id;
> + struct of_phandle_args sensor_specs;
> + struct device_node *np, *sensor_np;
> +
> + np = of_find_node_by_name(NULL, "thermal-zones");
> + if (!np)
> + return -ENODEV;
> +
> + sensor_np = of_get_next_child(np, NULL);
> + ret = of_parse_phandle_with_args(sensor_np, "thermal-
> sensors",
> + "#thermal-sensor-cells",
> + 0, &sensor_specs);
> + if (ret) {
> + of_node_put(np);
> + of_node_put(sensor_np);
> + return ret;
> + }
> +
> + if (sensor_specs.args_count >= 1) {
> + id = sensor_specs.args[0];
> + WARN(sensor_specs.args_count > 1,
> + "%s: too many cells in sensor
> specifier %d\n",
> + sensor_specs.np->name,
> sensor_specs.args_count);
> + } else {
> + id = 0;
> + }
> +
> + of_node_put(np);
> + of_node_put(sensor_np);
> +
> + return id;
> +}
> +
> +static int qoriq_tmu_calibration(struct platform_device *pdev)
> +{
> + int i, val, len;
> + u32 range[4];
> + const u32 *calibration;
> + struct device_node *np = pdev->dev.of_node;
> + struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
> +
> + if (of_property_read_u32_array(np, "fsl,tmu-range", range,
> 4)) {
> + dev_err(&pdev->dev, "missing calibration range.\n");
> + return -ENODEV;
> + }
> +
> + /* Init temperature range registers */
> + tmu_write(data, range[0], &data->regs->ttr0cr);
> + tmu_write(data, range[1], &data->regs->ttr1cr);
> + tmu_write(data, range[2], &data->regs->ttr2cr);
> + tmu_write(data, range[3], &data->regs->ttr3cr);
> +
> + calibration = of_get_property(np, "fsl,tmu-calibration",
> &len);
> + if (calibration == NULL || len % 8) {
> + dev_err(&pdev->dev, "invalid calibration data.\n");
> + return -ENODEV;
> + }
> +
> + for (i = 0; i < len; i += 8, calibration += 2) {
> + val = of_read_number(calibration, 1);
> + tmu_write(data, val, &data->regs->ttcfgr);
> + val = of_read_number(calibration + 1, 1);
> + tmu_write(data, val, &data->regs->tscfgr);
> + }
> +
> + return 0;
> +}
> +
> +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> +{
> + /* Disable interrupt, using polling instead */
> + tmu_write(data, TIER_DISABLE, &data->regs->tier);
> +
> + /* Set update_interval */
> + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir);
> +
> + /* Disable monitoring */
> + tmu_write(data, TMR_DISABLE, &data->regs->tmr);
> +}
> +
> +static struct thermal_zone_of_device_ops tmu_tz_ops = {
> + .get_temp = tmu_get_temp,
> +};
> +
> +static int qoriq_tmu_probe(struct platform_device *pdev)
> +{
> + int ret;
> + const struct thermal_trip *trip;
> + struct qoriq_tmu_data *data;
> + struct device_node *np = pdev->dev.of_node;
> + u32 site = 0;
> +
> + if (!np) {
> + dev_err(&pdev->dev, "Device OF-Node is NULL");
> + return -ENODEV;
> + }
> +
> + data = devm_kzalloc(&pdev->dev, sizeof(struct
> qoriq_tmu_data),
> + GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + platform_set_drvdata(pdev, data);
> +
> + data->little_endian = of_property_read_bool(np, "little-
> endian");
> +
> + data->sensor_id = qoriq_tmu_get_sensor_id();
> + if (data->sensor_id < 0) {
> + dev_err(&pdev->dev, "Failed to get sensor id\n");
> + ret = -ENODEV;
> + goto err_iomap;
> + }
> +
> + data->regs = of_iomap(np, 0);
> + if (!data->regs) {
> + dev_err(&pdev->dev, "Failed to get memory
> region\n");
> + ret = -ENODEV;
> + goto err_iomap;
> + }
> +
> + qoriq_tmu_init_device(data); /* TMU initialization */
> +
> + ret = qoriq_tmu_calibration(pdev); /* TMU calibration
> */
> + if (ret < 0)
> + goto err_tmu;
> +
> + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data-
> >sensor_id,
> + data, &tmu_tz_ops);
> + if (IS_ERR(data->tz)) {
> + ret = PTR_ERR(data->tz);
> + dev_err(&pdev->dev,
> + "Failed to register thermal zone device
> %d\n", ret);
> + goto err_tmu;
> + }
> +
> + trip = of_thermal_get_trip_points(data->tz);
> +
> + /* Enable monitoring */
> + site |= 0x1 << (15 - data->sensor_id);
> + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr);
> +
> + return 0;
> +
> +err_tmu:
> + iounmap(data->regs);
> +
> +err_iomap:
> + platform_set_drvdata(pdev, NULL);
> +
> + return ret;
> +}
> +
> +static int qoriq_tmu_remove(struct platform_device *pdev)
> +{
> + struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
> +
> + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz);
> +
> + /* Disable monitoring */
> + tmu_write(data, TMR_DISABLE, &data->regs->tmr);
> +
> + iounmap(data->regs);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int qoriq_tmu_suspend(struct device *dev)
> +{
> + u32 tmr;
> + struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> +
> + /* Disable monitoring */
> + tmr = tmu_read(data, &data->regs->tmr);
> + tmr &= ~TMR_ME;
> + tmu_write(data, tmr, &data->regs->tmr);
> +
> + return 0;
> +}
> +
> +static int qoriq_tmu_resume(struct device *dev)
> +{
> + u32 tmr;
> + struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> +
> + /* Enable monitoring */
> + tmr = tmu_read(data, &data->regs->tmr);
> + tmr |= TMR_ME;
> + tmu_write(data, tmr, &data->regs->tmr);
> +
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> + qoriq_tmu_suspend, qoriq_tmu_resume);
> +
> +static const struct of_device_id qoriq_tmu_match[] = {
> + { .compatible = "fsl,qoriq-tmu", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, qoriq_tmu_match);
> +
> +static struct platform_driver qoriq_tmu = {
> + .driver = {
> + .name = "qoriq_thermal",
> + .pm = &qoriq_tmu_pm_ops,
> + .of_match_table = qoriq_tmu_match,
> + },
> + .probe = qoriq_tmu_probe,
> + .remove = qoriq_tmu_remove,
> +};
> +module_platform_driver(qoriq_tmu);
> +
> +MODULE_AUTHOR("Jia Hongtao <hongtao.jia at nxp.com>");
> +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.1.0.27.g96db324
>
More information about the linux-arm-kernel
mailing list