[PATCH v3 5/9] mtd: spi-nor: fsl-quadspi:Support qspi for ls2080a
Yunhui Cui
B56489 at freescale.com
Thu Aug 18 00:38:00 PDT 2016
There is a hardware feature that qspi_amba_base is added
internally by SOC design on ls2080a. So as to software, the driver
need support to the feature.
Signed-off-by: Yunhui Cui <B56489 at freescale.com>
Signed-off-by: Yunhui Cui <yunhui.cui at nxp.com>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 2521370..57eed3c 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -41,6 +41,8 @@
#define QUADSPI_QUIRK_TKT253890 (1 << 2)
/* Controller cannot wake up from wait mode, TKT245618 */
#define QUADSPI_QUIRK_TKT245618 (1 << 3)
+/* QSPI_AMBA_BASE is internally added by SOC design */
+#define QUADSPI_AMBA_BASE_INTERNAL (0x10000)
/* The registers */
#define QUADSPI_MCR 0x00
@@ -217,6 +219,7 @@ enum fsl_qspi_devtype {
FSL_QUADSPI_IMX7D,
FSL_QUADSPI_IMX6UL,
FSL_QUADSPI_LS1021A,
+ FSL_QUADSPI_LS2080A,
};
struct fsl_qspi_devtype_data {
@@ -270,6 +273,14 @@ static struct fsl_qspi_devtype_data ls1021a_data = {
.driver_data = 0,
};
+static struct fsl_qspi_devtype_data ls2080a_data = {
+ .devtype = FSL_QUADSPI_LS2080A,
+ .rxfifo = 128,
+ .txfifo = 64,
+ .ahb_buf_size = 1024,
+ .driver_data = QUADSPI_AMBA_BASE_INTERNAL,
+};
+
#define FSL_QSPI_MAX_CHIP 4
struct fsl_qspi {
struct spi_nor nor[FSL_QSPI_MAX_CHIP];
@@ -312,6 +323,11 @@ static inline int needs_wakeup_wait_mode(struct fsl_qspi *q)
return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618;
}
+static inline int has_added_amba_base_internal(struct fsl_qspi *q)
+{
+ return q->devtype_data->driver_data & QUADSPI_AMBA_BASE_INTERNAL;
+}
+
/*
* R/W functions for big- or little-endian registers:
* The qSPI controller's endian is independent of the CPU core's endian.
@@ -558,8 +574,11 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 cmd, unsigned int addr, int len)
/* save the reg */
reg = qspi_readl(q, base + QUADSPI_MCR);
- qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
- base + QUADSPI_SFAR);
+ if (has_added_amba_base_internal(q))
+ qspi_writel(q, q->chip_base_addr + addr, base + QUADSPI_SFAR);
+ else
+ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr,
+ base + QUADSPI_SFAR);
qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS,
base + QUADSPI_RBCT);
qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR);
@@ -849,6 +868,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
{ .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, },
{ .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, },
{ .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, },
+ { .compatible = "fsl,ls2080a-qspi", .data = (void *)&ls2080a_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
--
2.1.0.27.g96db324
More information about the linux-arm-kernel
mailing list