[PATCH 03/14] rpmsg: rpmsg_send() operations takes rpmsg_endpoint
Loic PALLARDY
loic.pallardy at st.com
Thu Aug 18 00:36:09 PDT 2016
> -----Original Message-----
> From: linux-remoteproc-owner at vger.kernel.org [mailto:linux-remoteproc-
> owner at vger.kernel.org] On Behalf Of Bjorn Andersson
> Sent: Tuesday, August 16, 2016 2:17 AM
> To: Ohad Ben-Cohen <ohad at wizery.com>; Bjorn Andersson
> <bjorn.andersson at linaro.org>
> Cc: linux-remoteproc at vger.kernel.org; linux-arm-msm at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
> Subject: [PATCH 03/14] rpmsg: rpmsg_send() operations takes
> rpmsg_endpoint
>
> The rpmsg_send() operations has been taking a rpmsg_device, but this
> forces users of secondary rpmsg_endpoints to use the rpmsg_sendto()
> interface - by extracting source and destination from the given data
> structures. If we instead pass the rpmsg_endpoint to these functions a
> service can use rpmsg_sendto() to respond to messages, even on secondary
> endpoints.
>
> In addition this would allow us to support operations on multiple
> channels in future backends that does not support off-channel
> operations.
>
Hi Bjorn,
This patch is modifying rpmsg API by using rpmsg_endpoint as argument
instead of rpmsg_device.
But associated port of rpmsg_client_sample driver is missing in your patch series.
Please find inline few comments.
> Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
> ---
> drivers/rpmsg/virtio_rpmsg_bus.c | 4 +--
> include/linux/rpmsg.h | 70 +++++++++++++++++++++++-----------------
> 2 files changed, 42 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c
> b/drivers/rpmsg/virtio_rpmsg_bus.c
> index c4bd89ea7681..1b63f4b7c2bd 100644
> --- a/drivers/rpmsg/virtio_rpmsg_bus.c
> +++ b/drivers/rpmsg/virtio_rpmsg_bus.c
> @@ -382,7 +382,7 @@ static int rpmsg_dev_probe(struct device *dev)
> nsm.addr = rpdev->src;
Since endpoint is now used to indicate source, I'm wondering if it is possible
to suppress src field from struct rpmsg_channel and rely only on endpoint addr?
Else maybe confusing (which src addr used at the end: rpdev or ept?)
> nsm.flags = RPMSG_NS_CREATE;
>
> - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm),
> RPMSG_NS_ADDR);
> + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm),
> RPMSG_NS_ADDR);
> if (err)
> dev_err(dev, "failed to announce service %d\n", err);
> }
> @@ -407,7 +407,7 @@ static int rpmsg_dev_remove(struct device *dev)
> nsm.addr = rpdev->src;
> nsm.flags = RPMSG_NS_DESTROY;
>
> - err = rpmsg_sendto(rpdev, &nsm, sizeof(nsm),
> RPMSG_NS_ADDR);
> + err = rpmsg_sendto(rpdev->ept, &nsm, sizeof(nsm),
> RPMSG_NS_ADDR);
> if (err)
> dev_err(dev, "failed to announce service %d\n", err);
> }
> diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h
> index 2b97c711a5e3..88e302c011e6 100644
> --- a/include/linux/rpmsg.h
> +++ b/include/linux/rpmsg.h
> @@ -193,13 +193,14 @@ rpmsg_send_offchannel_raw(struct
> rpmsg_channel *, u32, u32, void *, int, bool);
>
> /**
> * rpmsg_send() - send a message across to the remote processor
> - * @rpdev: the rpmsg channel
> + * @ept: the rpmsg endpoint
> * @data: payload of message
> * @len: length of payload
> *
> - * This function sends @data of length @len on the @rpdev channel.
> - * The message will be sent to the remote processor which the @rpdev
> - * channel belongs to, using @rpdev's source and destination addresses.
> + * This function sends @data of length @len on the @ept endpoint.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address and its associated rpmsg
> + * device destination addresses.
> * In case there are no TX buffers available, the function will block until
> * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> * happens, -ERESTARTSYS is returned.
> @@ -208,23 +209,24 @@ rpmsg_send_offchannel_raw(struct
> rpmsg_channel *, u32, u32, void *, int, bool);
> *
> * Returns 0 on success and an appropriate error value on failure.
> */
> -static inline int rpmsg_send(struct rpmsg_channel *rpdev, void *data, int
> len)
> +static inline int rpmsg_send(struct rpmsg_endpoint *ept, void *data, int
> len)
> {
> - u32 src = rpdev->src, dst = rpdev->dst;
> + struct rpmsg_channel *rpdev = ept->rpdev;
> + u32 src = ept->addr, dst = rpdev->dst;
As this function is part of rpmsg API, it will be good to verify pointers before use.
>
> return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
> }
>
> /**
> * rpmsg_sendto() - send a message across to the remote processor, specify
> dst
> - * @rpdev: the rpmsg channel
> + * @ept: the rpmsg endpoint
> * @data: payload of message
> * @len: length of payload
> * @dst: destination address
> *
> * This function sends @data of length @len to the remote @dst address.
> - * The message will be sent to the remote processor which the @rpdev
> - * channel belongs to, using @rpdev's source address.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address as source.
> * In case there are no TX buffers available, the function will block until
> * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> * happens, -ERESTARTSYS is returned.
> @@ -234,16 +236,17 @@ static inline int rpmsg_send(struct rpmsg_channel
> *rpdev, void *data, int len)
> * Returns 0 on success and an appropriate error value on failure.
> */
> static inline
> -int rpmsg_sendto(struct rpmsg_channel *rpdev, void *data, int len, u32 dst)
> +int rpmsg_sendto(struct rpmsg_endpoint *ept, void *data, int len, u32 dst)
> {
> - u32 src = rpdev->src;
> + struct rpmsg_channel *rpdev = ept->rpdev;
> + u32 src = ept->addr;
ditto
>
> return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
> }
>
> /**
> * rpmsg_send_offchannel() - send a message using explicit src/dst
> addresses
> - * @rpdev: the rpmsg channel
> + * @ept: the rpmsg endpoint
> * @src: source address
> * @dst: destination address
> * @data: payload of message
> @@ -251,8 +254,8 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev, void
> *data, int len, u32 dst)
> *
> * This function sends @data of length @len to the remote @dst address,
> * and uses @src as the source address.
> - * The message will be sent to the remote processor which the @rpdev
> - * channel belongs to.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to.
> * In case there are no TX buffers available, the function will block until
> * one becomes available, or a timeout of 15 seconds elapses. When the
> latter
> * happens, -ERESTARTSYS is returned.
> @@ -262,21 +265,24 @@ int rpmsg_sendto(struct rpmsg_channel *rpdev,
> void *data, int len, u32 dst)
> * Returns 0 on success and an appropriate error value on failure.
> */
> static inline
> -int rpmsg_send_offchannel(struct rpmsg_channel *rpdev, u32 src, u32 dst,
> +int rpmsg_send_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
> void *data, int len)
> {
> + struct rpmsg_channel *rpdev = ept->rpdev;
ditto
> +
> return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, true);
> }
>
> /**
> * rpmsg_send() - send a message across to the remote processor
Function name and description not aligned with code.
Should be rpmsg_trysend
May be in another patch...
> - * @rpdev: the rpmsg channel
> + * @ept: the rpmsg endpoint
> * @data: payload of message
> * @len: length of payload
> *
> - * This function sends @data of length @len on the @rpdev channel.
> - * The message will be sent to the remote processor which the @rpdev
> - * channel belongs to, using @rpdev's source and destination addresses.
> + * This function sends @data of length @len on the @ept endpoint.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's addres as source and its associated
> + * rpdev's address as destination.
> * In case there are no TX buffers available, the function will immediately
> * return -ENOMEM without waiting until one becomes available.
> *
> @@ -285,23 +291,24 @@ int rpmsg_send_offchannel(struct rpmsg_channel
> *rpdev, u32 src, u32 dst,
> * Returns 0 on success and an appropriate error value on failure.
> */
> static inline
> -int rpmsg_trysend(struct rpmsg_channel *rpdev, void *data, int len)
> +int rpmsg_trysend(struct rpmsg_endpoint *ept, void *data, int len)
> {
> - u32 src = rpdev->src, dst = rpdev->dst;
> + struct rpmsg_channel *rpdev = ept->rpdev;
> + u32 src = ept->addr, dst = rpdev->dst;
Pointer check before use
>
> return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
> }
>
> /**
> * rpmsg_sendto() - send a message across to the remote processor, specify
> dst
Function name should be rpmsg_trysendto
> - * @rpdev: the rpmsg channel
> + * @ept: the rpmsg endpoint
> * @data: payload of message
> * @len: length of payload
> * @dst: destination address
> *
> * This function sends @data of length @len to the remote @dst address.
> - * The message will be sent to the remote processor which the @rpdev
> - * channel belongs to, using @rpdev's source address.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to, using @ept's address as source.
> * In case there are no TX buffers available, the function will immediately
> * return -ENOMEM without waiting until one becomes available.
> *
> @@ -310,16 +317,17 @@ int rpmsg_trysend(struct rpmsg_channel *rpdev,
> void *data, int len)
> * Returns 0 on success and an appropriate error value on failure.
> */
> static inline
> -int rpmsg_trysendto(struct rpmsg_channel *rpdev, void *data, int len, u32
> dst)
> +int rpmsg_trysendto(struct rpmsg_endpoint *ept, void *data, int len, u32
> dst)
> {
> - u32 src = rpdev->src;
> + struct rpmsg_channel *rpdev = ept->rpdev;
> + u32 src = ept->addr;
Check pointer before use
>
> return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
> }
>
> /**
> * rpmsg_send_offchannel() - send a message using explicit src/dst
> addresses
Description for rpmsg_trysend_offchannel...
> - * @rpdev: the rpmsg channel
> + * @ept: the rpmsg endpoint
> * @src: source address
> * @dst: destination address
> * @data: payload of message
> @@ -327,8 +335,8 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev,
> void *data, int len, u32 dst)
> *
> * This function sends @data of length @len to the remote @dst address,
> * and uses @src as the source address.
> - * The message will be sent to the remote processor which the @rpdev
> - * channel belongs to.
> + * The message will be sent to the remote processor which the @ept
> + * endpoint belongs to.
> * In case there are no TX buffers available, the function will immediately
> * return -ENOMEM without waiting until one becomes available.
> *
> @@ -337,9 +345,11 @@ int rpmsg_trysendto(struct rpmsg_channel *rpdev,
> void *data, int len, u32 dst)
> * Returns 0 on success and an appropriate error value on failure.
> */
> static inline
> -int rpmsg_trysend_offchannel(struct rpmsg_channel *rpdev, u32 src, u32
> dst,
> +int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32
> dst,
> void *data, int len)
> {
> + struct rpmsg_channel *rpdev = ept->rpdev;
> +
Point check before use
> return rpmsg_send_offchannel_raw(rpdev, src, dst, data, len, false);
> }
Regards,
Loic
>
> --
> 2.5.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-remoteproc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list