[PATCH 0/2] Fix Qualcomm 8064/8660 interrupt flags

[Andy Gross]

On Wed, Aug 17, 2016 at 01:47:40PM -0700, Bjorn Andersson wrote:
> On Wed 17 Aug 12:43 PDT 2016, Andy Gross wrote:
> 
> > On Wed, Aug 17, 2016 at 10:56:22AM +0200, Linus Walleij wrote:
> > > On Fri, Aug 5, 2016 at 10:38 AM, Linus Walleij <linus.walleij at linaro.org> wrote:
> > > 
> > > > This came out after some frustration with trying to flag a PM8058
> > > > interrupt line on the APQ8060 (MSM8660) to trigger on falling
> > > > edges. It was conflicting badly with predefined contradictory
> > > > flags in the device tree for the entire GPIO block. The same
> > > > seems to hold for the MPP GPIO IRQs.
> > > 
> > > Andy are you funneling these two patches for fixes?
> > 
> > I looked at these last night.  What's the outcome of John's issues with the
> > patch not fixing his problem?  Do these need to be taken irrespective of his
> > plight?
> > 
> 
> John's issue was that the order of operations was changed in the IRQ
> framework, so that upon passing through the set_type() in the TLMM
> driver I would overwrite, and hence disable, the chained IRQ handler -
> as I should.
> 
> As the PMIC interrupt is chained from the TLMM no interrupts was
> delivered.
> 
> 
> So please move forward with these changes.

Ah ok.  I'll queue these up.

Andy