[PATCH v2 4/7] phy-sun4i-usb: Add support for phy_set_mode

[Sergei Shtylyov]

Hello.

On 08/15/2016 10:21 PM, Hans de Goede wrote:

> Together with some musb sunxi glue changes this allows run-time dr_mode
> switching support via the "mode" musb sysfs attribute.
>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  drivers/phy/phy-sun4i-usb.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>
> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> index fb2d4f3..d369081 100644
> --- a/drivers/phy/phy-sun4i-usb.c
> +++ b/drivers/phy/phy-sun4i-usb.c
> @@ -427,6 +427,29 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
>  	return 0;
>  }
>
> +static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
> +{
> +	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
> +	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
> +
> +	if (phy->index != 0)
> +		return -EINVAL;
> +
> +	switch (mode) {
> +	case PHY_MODE_USB_HOST:   data->dr_mode = USB_DR_MODE_HOST; break;
> +	case PHY_MODE_USB_DEVICE: data->dr_mode = USB_DR_MODE_PERIPHERAL; break;
> +	case PHY_MODE_USB_OTG:    data->dr_mode = USB_DR_MODE_OTG; break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode);
> +	data->force_session_end = true;
> +	queue_delayed_work(system_wq, &data->detect, 0);
> +
> +	return 0;
> +}
> +
>  void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
>  {
>  	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
[...]

$ scripts/checkpatch.pl 
~/patches/phy-sun4i-usb-Add-support-for-phy_set_mode.patch
ERROR: trailing statements should be on next line
#29: FILE: drivers/phy/phy-sun4i-usb.c:439:
+	case PHY_MODE_USB_HOST:   data->dr_mode = USB_DR_MODE_HOST; break;

ERROR: trailing statements should be on next line
#30: FILE: drivers/phy/phy-sun4i-usb.c:440:
+	case PHY_MODE_USB_DEVICE: data->dr_mode = USB_DR_MODE_PERIPHERAL; break;

ERROR: trailing statements should be on next line
#31: FILE: drivers/phy/phy-sun4i-usb.c:441:
+	case PHY_MODE_USB_OTG:    data->dr_mode = USB_DR_MODE_OTG; break;

total: 3 errors, 0 warnings, 36 lines checked

NOTE: For some of the reported defects, checkpatch may be able to
       mechanically convert to the typical style using --fix or --fix-inplace.

/home/headless/patches/phy-sun4i-usb-Add-support-for-phy_set_mode.patch has 
style problems, please review.

NOTE: If any of the errors are false positives, please report
       them to the maintainer, see CHECKPATCH in MAINTAINERS.

MBR, Sergei