[PATCH] kvm: arm: Enforce some NS-SVC initialisation

[Marc Zyngier]

On 21/07/16 13:01, Robin Murphy wrote:
> Since the non-secure copies of banked registers lack architecturally
> defined reset values, there is no actual guarantee when entering in Hyp
> from secure-only firmware that the non-secure PL1 state will look the
> way that kernel entry (in particular the decompressor stub) expects.
> So far, we've been getting away with it thanks to implementation details
> of ARMv7 cores and/or bootloader behaviour, but for the sake of forwards
> compatibility let's try to ensure that we have a minimally sane state
> before dropping down into it.
> 
> Signed-off-by: Robin Murphy <robin.murphy at arm.com>
> ---
>  arch/arm/kernel/hyp-stub.S | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
> index 0b1e4a93d67e..7de3fe15ab21 100644
> --- a/arch/arm/kernel/hyp-stub.S
> +++ b/arch/arm/kernel/hyp-stub.S
> @@ -142,6 +142,18 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
>  	and	r7, #0x1f		@ Preserve HPMN
>  	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
>  
> +	@ Make sure NS-SVC is initialised appropriately
> +	mrc	p15, 0, r7, c1, c0, 0	@ SCTLR
> +	orr	r7, #(1 << 5)		@ CP15 barriers enabled
> +	bic	r7, #(3 << 19)		@ WXN and UWXN disabled

I think that while you're doing this, you also may want to clear SED and
ITD so that a BE kernel has a chance to survive its first instruction
(assuming it it uses the decompressor...).

> +	mcr	p15, 0, r7, c1, c0, 0	@ SCTLR
> +
> +	mrc	p15, 0, r7, c0, c0, 0	@ MIDR
> +	mcr	p15, 4, r7, c0, c0, 0	@ VPIDR
> +
> +	mrc	p15, 0, r7, c0, c0, 5	@ MPIDR
> +	mcr	p15, 4, r7, c0, c0, 5	@ VMPIDR
> +
>  #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
>  	@ make CNTP_* and CNTPCT accessible from PL1
>  	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
> 

Otherwise looks good.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...