[PATCH v2 6/7] ARM: KVM: Get ready to use vgic-v3
Vladimir Murzin
vladimir.murzin at arm.com
Tue Aug 16 03:46:57 PDT 2016
We need to take care we have everything vgic-v3 expects from us before
a quantum leap:
- provide required macros via uapi.h
- handle access to GICv3 cpu interface from the guest
- provide mapping between arm64 version of GICv3 cpu registers and arm's
The later is handled via redirection of read{write}_gicreg() and
required mainly because 64-bit wide ICH_LR is split in two 32-bit
halves (ICH_LR and ICH_LRC) accessed independently.
Signed-off-by: Vladimir Murzin <vladimir.murzin at arm.com>
---
arch/arm/include/asm/arch_gicv3.h | 64 +++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/kvm_asm.h | 3 ++
arch/arm/include/uapi/asm/kvm.h | 7 ++++
arch/arm/kvm/coproc.c | 36 +++++++++++++++++++++
4 files changed, 110 insertions(+)
diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index af25c32..f93f6bd 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -96,6 +96,70 @@
#define ICH_AP1R2 __AP1Rx(2)
#define ICH_AP1R3 __AP1Rx(3)
+/* A32-to-A64 mappings used by VGIC save/restore */
+
+#define CPUIF_MAP(a32, a64) \
+static inline void write_ ## a64(u32 val) \
+{ \
+ write_sysreg(val, a32); \
+} \
+static inline u32 read_ ## a64(void) \
+{ \
+ return read_sysreg(a32); \
+} \
+
+#define CPUIF_MAP_LO_HI(a32lo, a32hi, a64) \
+static inline void write_ ## a64(u64 val) \
+{ \
+ write_sysreg((u32)val, a32lo); \
+ write_sysreg((u32)(val >> 32), a32hi); \
+} \
+static inline u64 read_ ## a64(void) \
+{ \
+ u64 val = read_sysreg(a32lo); \
+ \
+ val |= (u64)read_sysreg(a32hi) << 32; \
+ \
+ return val; \
+}
+
+CPUIF_MAP(ICH_HCR, ICH_HCR_EL2)
+CPUIF_MAP(ICH_VTR, ICH_VTR_EL2)
+CPUIF_MAP(ICH_MISR, ICH_MISR_EL2)
+CPUIF_MAP(ICH_EISR, ICH_EISR_EL2)
+CPUIF_MAP(ICH_ELSR, ICH_ELSR_EL2)
+CPUIF_MAP(ICH_VMCR, ICH_VMCR_EL2)
+CPUIF_MAP(ICH_AP0R3, ICH_AP0R3_EL2)
+CPUIF_MAP(ICH_AP0R2, ICH_AP0R2_EL2)
+CPUIF_MAP(ICH_AP0R1, ICH_AP0R1_EL2)
+CPUIF_MAP(ICH_AP0R0, ICH_AP0R0_EL2)
+CPUIF_MAP(ICH_AP1R3, ICH_AP1R3_EL2)
+CPUIF_MAP(ICH_AP1R2, ICH_AP1R2_EL2)
+CPUIF_MAP(ICH_AP1R1, ICH_AP1R1_EL2)
+CPUIF_MAP(ICH_AP1R0, ICH_AP1R0_EL2)
+CPUIF_MAP(ICC_HSRE, ICC_SRE_EL2)
+CPUIF_MAP(ICC_SRE, ICC_SRE_EL1)
+
+CPUIF_MAP_LO_HI(ICH_LR15, ICH_LRC15, ICH_LR15_EL2)
+CPUIF_MAP_LO_HI(ICH_LR14, ICH_LRC14, ICH_LR14_EL2)
+CPUIF_MAP_LO_HI(ICH_LR13, ICH_LRC13, ICH_LR13_EL2)
+CPUIF_MAP_LO_HI(ICH_LR12, ICH_LRC12, ICH_LR12_EL2)
+CPUIF_MAP_LO_HI(ICH_LR11, ICH_LRC11, ICH_LR11_EL2)
+CPUIF_MAP_LO_HI(ICH_LR10, ICH_LRC10, ICH_LR10_EL2)
+CPUIF_MAP_LO_HI(ICH_LR9, ICH_LRC9, ICH_LR9_EL2)
+CPUIF_MAP_LO_HI(ICH_LR8, ICH_LRC8, ICH_LR8_EL2)
+CPUIF_MAP_LO_HI(ICH_LR7, ICH_LRC7, ICH_LR7_EL2)
+CPUIF_MAP_LO_HI(ICH_LR6, ICH_LRC6, ICH_LR6_EL2)
+CPUIF_MAP_LO_HI(ICH_LR5, ICH_LRC5, ICH_LR5_EL2)
+CPUIF_MAP_LO_HI(ICH_LR4, ICH_LRC4, ICH_LR4_EL2)
+CPUIF_MAP_LO_HI(ICH_LR3, ICH_LRC3, ICH_LR3_EL2)
+CPUIF_MAP_LO_HI(ICH_LR2, ICH_LRC2, ICH_LR2_EL2)
+CPUIF_MAP_LO_HI(ICH_LR1, ICH_LRC1, ICH_LR1_EL2)
+CPUIF_MAP_LO_HI(ICH_LR0, ICH_LRC0, ICH_LR0_EL2)
+
+#define read_gicreg(r) read_##r()
+#define write_gicreg(v, r) write_##r(v)
+
/* Low-level accessors */
static inline void gic_write_eoir(u32 irq)
diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h
index 58faff5..dfccf94 100644
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@@ -68,6 +68,9 @@ extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
extern void __init_stage2_translation(void);
extern void __kvm_hyp_reset(unsigned long);
+
+extern u64 __vgic_v3_get_ich_vtr_el2(void);
+extern void __vgic_v3_init_lrs(void);
#endif
#endif /* __ARM_KVM_ASM_H__ */
diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
index a2b3eb3..b38c10c 100644
--- a/arch/arm/include/uapi/asm/kvm.h
+++ b/arch/arm/include/uapi/asm/kvm.h
@@ -84,6 +84,13 @@ struct kvm_regs {
#define KVM_VGIC_V2_DIST_SIZE 0x1000
#define KVM_VGIC_V2_CPU_SIZE 0x2000
+/* Supported VGICv3 address types */
+#define KVM_VGIC_V3_ADDR_TYPE_DIST 2
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST 3
+
+#define KVM_VGIC_V3_DIST_SIZE SZ_64K
+#define KVM_VGIC_V3_REDIST_SIZE (2 * SZ_64K)
+
#define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */
#define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */
diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c
index 1bb2b79..10c0244 100644
--- a/arch/arm/kvm/coproc.c
+++ b/arch/arm/kvm/coproc.c
@@ -228,6 +228,36 @@ bool access_vm_reg(struct kvm_vcpu *vcpu,
return true;
}
+static bool access_gic_sgi(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ u64 reg;
+
+ if (!p->is_write)
+ return read_from_write_only(vcpu, p);
+
+ reg = *vcpu_reg(vcpu, p->Rt2);
+ reg <<= 32;
+ reg |= *vcpu_reg(vcpu, p->Rt1) ;
+
+ vgic_v3_dispatch_sgi(vcpu, reg);
+
+ return true;
+}
+
+static bool access_gic_sre(struct kvm_vcpu *vcpu,
+ const struct coproc_params *p,
+ const struct coproc_reg *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ *vcpu_reg(vcpu, p->Rt1) = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+
+ return true;
+}
+
/*
* We could trap ID_DFR0 and tell the guest we don't support performance
* monitoring. Unfortunately the patch to make the kernel check ID_DFR0 was
@@ -361,10 +391,16 @@ static const struct coproc_reg cp15_regs[] = {
{ CRn(10), CRm( 3), Op1( 0), Op2( 1), is32,
access_vm_reg, reset_unknown, c10_AMAIR1},
+ /* ICC_SGI1R */
+ { CRm64(12), Op1( 0), is64, access_gic_sgi},
+
/* VBAR: swapped by interrupt.S. */
{ CRn(12), CRm( 0), Op1( 0), Op2( 0), is32,
NULL, reset_val, c12_VBAR, 0x00000000 },
+ /* ICC_SRE */
+ { CRn(12), CRm(12), Op1( 0), Op2(5), is32, access_gic_sre },
+
/* CONTEXTIDR/TPIDRURW/TPIDRURO/TPIDRPRW: swapped by interrupt.S. */
{ CRn(13), CRm( 0), Op1( 0), Op2( 1), is32,
access_vm_reg, reset_val, c13_CID, 0x00000000 },
--
1.7.9.5
More information about the linux-arm-kernel
mailing list