[PATCH v6 2/8] arm: parse cpu capacity-dmips-mhz from DT
Vincent Guittot
vincent.guittot at linaro.org
Tue Aug 16 01:20:57 PDT 2016
Hi Juri,
On 19 July 2016 at 14:40, Juri Lelli <juri.lelli at arm.com> wrote:
> With the introduction of cpu capacity-dmips-mhz bindings, CPU capacities
> can now be calculated from values extracted from DT and information
> coming from cpufreq. Add parsing of DT information at boot time, and
> complement it with cpufreq information. We keep code that can produce
> same information, based on different DT properties and hard-coded
> values, as fall-back for backward compatibility.
>
> Caveat: the information provided by this patch will start to be used in
> the future. We need to #define arch_scale_cpu_capacity to something
> provided in arch, so that scheduler's default implementation (which gets
> used if arch_scale_cpu_capacity is not defined) is overwritten.
>
> Cc: Russell King <linux at arm.linux.org.uk>
> Signed-off-by: Juri Lelli <juri.lelli at arm.com>
> ---
>
> Changes from v1:
> - normalize w.r.t. highest capacity found in DT
> - bailout conditions (all-or-nothing)
>
> Changes from v4:
> - parsing modified to reflect change in binding (capacity-dmips-mhz)
>
> Changes from v5:
> - allocate raw_capacity array with kcalloc()
> - pr_err() only for partial capacity information
> ---
> arch/arm/kernel/topology.c | 145 ++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 144 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
> index ec279d161b32..b3094e6eb1f5 100644
> --- a/arch/arm/kernel/topology.c
> +++ b/arch/arm/kernel/topology.c
> @@ -78,6 +78,134 @@ static unsigned long *__cpu_capacity;
> #define cpu_capacity(cpu) __cpu_capacity[cpu]
>
> static unsigned long middle_capacity = 1;
> +static bool cap_from_dt = true;
> +static u32 *raw_capacity;
> +static bool cap_parsing_failed;
> +static u32 capacity_scale;
> +
> +static int __init parse_cpu_capacity(struct device_node *cpu_node, int cpu)
> +{
> + int ret = 1;
> + u32 cpu_capacity;
> +
> + if (cap_parsing_failed)
> + return !ret;
> +
> + ret = of_property_read_u32(cpu_node,
> + "capacity-dmips-mhz",
> + &cpu_capacity);
> + if (!ret) {
> + if (!raw_capacity) {
> + raw_capacity = kcalloc(num_possible_cpus(),
> + sizeof(*raw_capacity),
> + GFP_KERNEL);
> + if (!raw_capacity) {
> + pr_err("cpu_capacity: failed to allocate memory for raw capacities\n");
> + cap_parsing_failed = true;
> + return !ret;
> + }
> + }
> + capacity_scale = max(cpu_capacity, capacity_scale);
> + raw_capacity[cpu] = cpu_capacity;
> + pr_debug("cpu_capacity: %s cpu_capacity=%u (raw)\n",
> + cpu_node->full_name, raw_capacity[cpu]);
> + } else {
> + if (raw_capacity) {
> + pr_err("cpu_capacity: missing %s raw capacity\n",
> + cpu_node->full_name);
> + pr_err("cpu_capacity: partial information: fallback to 1024 for all CPUs\n");
> + }
> + cap_parsing_failed = true;
> + kfree(raw_capacity);
> + }
> +
> + return !ret;
> +}
> +
> +static void normalize_cpu_capacity(void)
> +{
> + u64 capacity;
> + int cpu;
> +
> + if (!raw_capacity || cap_parsing_failed)
> + return;
> +
> + pr_debug("cpu_capacity: capacity_scale=%u\n", capacity_scale);
> + for_each_possible_cpu(cpu) {
> + capacity = (raw_capacity[cpu] << SCHED_CAPACITY_SHIFT)
> + / capacity_scale;
> + set_capacity_scale(cpu, capacity);
> + pr_debug("cpu_capacity: CPU%d cpu_capacity=%lu\n",
> + cpu, arch_scale_cpu_capacity(NULL, cpu));
> + }
> +}
> +
> +#ifdef CONFIG_CPU_FREQ
> +static cpumask_var_t cpus_to_visit;
> +static bool cap_parsing_done;
> +
> +static int
> +init_cpu_capacity_callback(struct notifier_block *nb,
> + unsigned long val,
> + void *data)
> +{
> + struct cpufreq_policy *policy = data;
> + int cpu;
> +
> + if (cap_parsing_failed || cap_parsing_done)
> + return 0;
> +
> + switch (val) {
> + case CPUFREQ_NOTIFY:
> + pr_debug("cpu_capacity: init cpu capacity for CPUs [%*pbl] (to_visit=%*pbl)\n",
> + cpumask_pr_args(policy->related_cpus),
> + cpumask_pr_args(cpus_to_visit));
> + cpumask_andnot(cpus_to_visit,
> + cpus_to_visit,
> + policy->related_cpus);
> + for_each_cpu(cpu, policy->related_cpus) {
> + raw_capacity[cpu] = arch_scale_cpu_capacity(NULL, cpu) *
> + policy->max / 1000UL;
Should it be policy->cpuinfo.max_freq instead of policy->max ?
> + capacity_scale = max(raw_capacity[cpu], capacity_scale);
> + }
> + if (cpumask_empty(cpus_to_visit)) {
> + normalize_cpu_capacity();
> + kfree(raw_capacity);
> + pr_debug("cpu_capacity: parsing done\n");
> + cap_parsing_done = true;
ok so you do that once with the 1st governor that will be registered
for the CPU. Can't you unregister the notifier then ?
> + }
> + }
> + return 0;
> +}
> +
> +static struct notifier_block init_cpu_capacity_notifier = {
> + .notifier_call = init_cpu_capacity_callback,
> +};
> +
> +static int __init register_cpufreq_notifier(void)
> +{
> + if (cap_parsing_failed)
> + return -EINVAL;
> +
> + if (!alloc_cpumask_var(&cpus_to_visit, GFP_KERNEL)) {
> + pr_err("cpu_capacity: failed to allocate memory for cpus_to_visit\n");
> + return -ENOMEM;
> + }
> + cpumask_copy(cpus_to_visit, cpu_possible_mask);
> +
> + return cpufreq_register_notifier(&init_cpu_capacity_notifier,
> + CPUFREQ_POLICY_NOTIFIER);
> +}
> +core_initcall(register_cpufreq_notifier);
> +#else
> +static int __init free_raw_capacity(void)
> +{
> + kfree(raw_capacity);
> +
> + return 0;
> +}
> +core_initcall(free_raw_capacity);
> +#endif
>
> /*
> * Iterate all CPUs' descriptor in DT and compute the efficiency
> @@ -99,6 +227,12 @@ static void __init parse_dt_topology(void)
> __cpu_capacity = kcalloc(nr_cpu_ids, sizeof(*__cpu_capacity),
> GFP_NOWAIT);
>
> + cn = of_find_node_by_path("/cpus");
> + if (!cn) {
> + pr_err("No CPU information found in DT\n");
> + return;
> + }
> +
> for_each_possible_cpu(cpu) {
> const u32 *rate;
> int len;
> @@ -110,6 +244,13 @@ static void __init parse_dt_topology(void)
> continue;
> }
>
> + if (parse_cpu_capacity(cn, cpu)) {
> + of_node_put(cn);
> + continue;
> + }
> +
> + cap_from_dt = false;
> +
> for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++)
> if (of_device_is_compatible(cn, cpu_eff->compatible))
> break;
> @@ -151,6 +292,8 @@ static void __init parse_dt_topology(void)
> middle_capacity = ((max_capacity / 3)
> >> (SCHED_CAPACITY_SHIFT-1)) + 1;
>
> + if (cap_from_dt && !cap_parsing_failed)
> + normalize_cpu_capacity();
> }
>
> /*
> @@ -160,7 +303,7 @@ static void __init parse_dt_topology(void)
> */
> static void update_cpu_capacity(unsigned int cpu)
> {
> - if (!cpu_capacity(cpu))
> + if (!cpu_capacity(cpu) || cap_from_dt)
> return;
>
> set_capacity_scale(cpu, cpu_capacity(cpu) / middle_capacity);
> --
> 2.7.0
>
More information about the linux-arm-kernel
mailing list