[PATCH v3 3/4] media: Add Mediatek MDP Driver
Hans Verkuil
hverkuil at xs4all.nl
Mon Aug 15 05:55:08 PDT 2016
On 08/09/2016 03:58 PM, Minghsiu Tsai wrote:
> Add MDP driver for MT8173
>
> Signed-off-by: Minghsiu Tsai <minghsiu.tsai at mediatek.com>
> ---
> drivers/media/platform/Kconfig | 16 +
> drivers/media/platform/Makefile | 2 +
> drivers/media/platform/mtk-mdp/Makefile | 9 +
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.c | 159 ++++
> drivers/media/platform/mtk-mdp/mtk_mdp_comp.h | 72 ++
> drivers/media/platform/mtk-mdp/mtk_mdp_core.c | 294 ++++++
> drivers/media/platform/mtk-mdp/mtk_mdp_core.h | 240 +++++
> drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h | 126 +++
> drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c | 1263 +++++++++++++++++++++++++
> drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h | 22 +
> drivers/media/platform/mtk-mdp/mtk_mdp_regs.c | 153 +++
> drivers/media/platform/mtk-mdp/mtk_mdp_regs.h | 31 +
> drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c | 145 +++
> drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h | 41 +
> 14 files changed, 2573 insertions(+)
> create mode 100644 drivers/media/platform/mtk-mdp/Makefile
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_comp.c
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_comp.h
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_core.c
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_core.h
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_ipi.h
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.c
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_m2m.h
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_regs.c
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_regs.h
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.c
> create mode 100644 drivers/media/platform/mtk-mdp/mtk_mdp_vpu.h
>
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index f25344b..4bb874b 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -166,6 +166,22 @@ config VIDEO_MEDIATEK_VPU
> To compile this driver as a module, choose M here: the
> module will be called mtk-vpu.
>
> +config VIDEO_MEDIATEK_MDP
> + tristate "Mediatek MDP driver"
> + depends on MTK_IOMMU || COMPILE_TEST
> + depends on VIDEO_DEV && VIDEO_V4L2
> + depends on ARCH_MEDIATEK || COMPILE_TEST
This needs a 'depends on HAS_DMA' as well.
> + select VIDEOBUF2_DMA_CONTIG
> + select V4L2_MEM2MEM_DEV
> + select VIDEO_MEDIATEK_VPU
> + default n
> + ---help---
> + It is a v4l2 driver and present in Mediatek MT8173 SoCs.
> + The driver supports for scaling and color space conversion.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-mdp.
> +
> config VIDEO_MEDIATEK_VCODEC
> tristate "Mediatek Video Codec driver"
> depends on MTK_IOMMU || COMPILE_TEST
<snip>
> +
> +/*
> + * Return true if rectangle a is enclosed in rectangle b, or false otherwise.
> + */
> +static bool mtk_mdp_m2m_is_rectangle_enclosed(struct v4l2_rect *a,
> + struct v4l2_rect *b)
> +{
> + if (a->left < b->left || a->top < b->top)
> + return false;
> +
> + if (a->left + a->width > b->left + b->width)
> + return false;
> +
> + if (a->top + a->height > b->top + b->height)
> + return false;
> +
> + return true;
> +}
> +
> +static int mtk_mdp_m2m_g_selection(struct file *file, void *fh,
> + struct v4l2_selection *s)
> +{
> + struct mtk_mdp_frame *frame;
> + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh);
> +
> + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
> + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)) {
> + mtk_mdp_dbg(1, "[%d] invalid type:%d", ctx->id, s->type);
> + return -EINVAL;
> + }
> +
> + frame = mtk_mdp_ctx_get_frame(ctx, s->type);
> +
> + switch (s->target) {
> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + s->r.left = 0;
> + s->r.top = 0;
> + s->r.width = frame->width;
> + s->r.height = frame->height;
> + return 0;
> +
> + case V4L2_SEL_TGT_COMPOSE:
> + case V4L2_SEL_TGT_CROP:
> + s->r.left = frame->crop.left;
> + s->r.top = frame->crop.top;
> + s->r.width = frame->crop.width;
> + s->r.height = frame->crop.height;
> + return 0;
> + }
This isn't right. For VIDEO_CAPTURE you support the COMPOSE targets, and for
the VIDEO_OUTPUT you support the CROP targets. Right now I can use e.g. TGT_CROP
with VIDEO_CAPTURE, which isn't correct.
s_selection has the same problem.
> +
> + return -EINVAL;
> +}
> +
> +static int mtk_mdp_check_scaler_ratio(struct mtk_mdp_variant *var, int src_w,
> + int src_h, int dst_w, int dst_h, int rot)
> +{
> + int tmp_w, tmp_h;
> +
> + if (rot == 90 || rot == 270) {
> + tmp_w = dst_h;
> + tmp_h = dst_w;
> + } else {
> + tmp_w = dst_w;
> + tmp_h = dst_h;
> + }
> +
> + if ((src_w / tmp_w) > var->h_scale_down_max ||
> + (src_h / tmp_h) > var->v_scale_down_max ||
> + (tmp_w / src_w) > var->h_scale_up_max ||
> + (tmp_h / src_h) > var->v_scale_up_max)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int mtk_mdp_m2m_s_selection(struct file *file, void *fh,
> + struct v4l2_selection *s)
> +{
> + struct mtk_mdp_frame *frame;
> + struct mtk_mdp_ctx *ctx = fh_to_ctx(fh);
> + struct v4l2_crop cr;
> + struct mtk_mdp_variant *variant = ctx->mdp_dev->variant;
> + int ret;
> +
> + cr.type = s->type;
> + cr.c = s->r;
> +
> + if ((s->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) &&
> + (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)) {
> + mtk_mdp_dbg(1, "[%d] invalid type:%d", ctx->id, s->type);
> + return -EINVAL;
> + }
> +
> + ret = mtk_mdp_try_crop(ctx, &cr);
Please don't copy to a v4l2_crop. Just stick to v4l2_selection.
I would prefer not to see struct v4l2_crop in drivers.
> + if (ret)
> + return ret;
> +
> + if (s->flags & V4L2_SEL_FLAG_LE &&
> + !mtk_mdp_m2m_is_rectangle_enclosed(&cr.c, &s->r))
> + return -ERANGE;
> +
> + if (s->flags & V4L2_SEL_FLAG_GE &&
> + !mtk_mdp_m2m_is_rectangle_enclosed(&s->r, &cr.c))
> + return -ERANGE;
As has been discussed for the encoder driver: just adjust the rectangle and
don't return ERANGE. Consider the flags as hints.
The V4L2 documentation is confusing, this will be addressed soon.
> +
> + s->r = cr.c;
> +
> + switch (s->target) {
> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
> + case V4L2_SEL_TGT_COMPOSE:
> + frame = &ctx->s_frame;
> + break;
> +
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + case V4L2_SEL_TGT_CROP:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + frame = &ctx->d_frame;
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + /* Check to see if scaling ratio is within supported range */
> + if (mtk_mdp_ctx_state_is_set(ctx, MTK_MDP_DST_FMT | MTK_MDP_SRC_FMT)) {
> + if (V4L2_TYPE_IS_OUTPUT(s->type)) {
> + ret = mtk_mdp_check_scaler_ratio(variant, cr.c.width,
> + cr.c.height, ctx->d_frame.crop.width,
> + ctx->d_frame.crop.height,
> + ctx->ctrls.rotate->val);
> + } else {
> + ret = mtk_mdp_check_scaler_ratio(variant,
> + ctx->s_frame.crop.width,
> + ctx->s_frame.crop.height, cr.c.width,
> + cr.c.height, ctx->ctrls.rotate->val);
> + }
> +
> + if (ret) {
> + dev_info(&ctx->mdp_dev->pdev->dev,
> + "Out of scaler range");
> + return -EINVAL;
> + }
> + }
> +
> + frame->crop = cr.c;
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops mtk_mdp_m2m_ioctl_ops = {
> + .vidioc_querycap = mtk_mdp_m2m_querycap,
> + .vidioc_enum_fmt_vid_cap_mplane = mtk_mdp_m2m_enum_fmt_mplane_vid_cap,
> + .vidioc_enum_fmt_vid_out_mplane = mtk_mdp_m2m_enum_fmt_mplane_vid_out,
> + .vidioc_g_fmt_vid_cap_mplane = mtk_mdp_m2m_g_fmt_mplane,
> + .vidioc_g_fmt_vid_out_mplane = mtk_mdp_m2m_g_fmt_mplane,
> + .vidioc_try_fmt_vid_cap_mplane = mtk_mdp_m2m_try_fmt_mplane,
> + .vidioc_try_fmt_vid_out_mplane = mtk_mdp_m2m_try_fmt_mplane,
> + .vidioc_s_fmt_vid_cap_mplane = mtk_mdp_m2m_s_fmt_mplane,
> + .vidioc_s_fmt_vid_out_mplane = mtk_mdp_m2m_s_fmt_mplane,
> + .vidioc_reqbufs = mtk_mdp_m2m_reqbufs,
> + .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
> + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
> + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
> + .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
> + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
> + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
> + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
> + .vidioc_streamon = mtk_mdp_m2m_streamon,
> + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
> + .vidioc_g_selection = mtk_mdp_m2m_g_selection,
> + .vidioc_s_selection = mtk_mdp_m2m_s_selection
> +};
> +
> +static int mtk_mdp_m2m_queue_init(void *priv, struct vb2_queue *src_vq,
> + struct vb2_queue *dst_vq)
> +{
> + struct mtk_mdp_ctx *ctx = priv;
> + int ret;
> +
> + memset(src_vq, 0, sizeof(*src_vq));
> + src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
> + src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
> + src_vq->drv_priv = ctx;
> + src_vq->ops = &mtk_mdp_m2m_qops;
> + src_vq->mem_ops = &vb2_dma_contig_memops;
> + src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> + src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + src_vq->dev = &ctx->mdp_dev->pdev->dev;
> +
> + ret = vb2_queue_init(src_vq);
> + if (ret)
> + return ret;
> +
> + memset(dst_vq, 0, sizeof(*dst_vq));
> + dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
> + dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
I wouldn't recommend setting VB2_USERPTR in combination with dma_contig.
That only works if the userptr points to physically contiguous memory,
unless there is an iommu that can fix things up.
> + dst_vq->drv_priv = ctx;
> + dst_vq->ops = &mtk_mdp_m2m_qops;
> + dst_vq->mem_ops = &vb2_dma_contig_memops;
> + dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> + dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + dst_vq->dev = &ctx->mdp_dev->pdev->dev;
> +
> + return vb2_queue_init(dst_vq);
> +}
> +
> +static int mtk_mdp_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct mtk_mdp_ctx *ctx = ctrl_to_ctx(ctrl);
> + struct mtk_mdp_dev *mdp = ctx->mdp_dev;
> + struct mtk_mdp_variant *variant = mdp->variant;
> + u32 state = MTK_MDP_DST_FMT | MTK_MDP_SRC_FMT;
> + int ret = 0;
> +
> + if (ctrl->flags & V4L2_CTRL_FLAG_INACTIVE)
> + return 0;
> +
> + switch (ctrl->id) {
> + case V4L2_CID_HFLIP:
> + ctx->hflip = ctrl->val;
> + break;
> + case V4L2_CID_VFLIP:
> + ctx->vflip = ctrl->val;
> + break;
> + case V4L2_CID_ROTATE:
> + if (mtk_mdp_ctx_state_is_set(ctx, state)) {
> + ret = mtk_mdp_check_scaler_ratio(variant,
> + ctx->s_frame.crop.width,
> + ctx->s_frame.crop.height,
> + ctx->d_frame.crop.width,
> + ctx->d_frame.crop.height,
> + ctx->ctrls.rotate->val);
> +
> + if (ret)
> + return -EINVAL;
> + }
> +
> + ctx->rotation = ctrl->val;
> + break;
> + case V4L2_CID_ALPHA_COMPONENT:
> + ctx->d_frame.alpha = ctrl->val;
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_ctrl_ops mtk_mdp_ctrl_ops = {
> + .s_ctrl = mtk_mdp_s_ctrl,
> +};
> +
> +static int mtk_mdp_ctrls_create(struct mtk_mdp_ctx *ctx)
> +{
> + v4l2_ctrl_handler_init(&ctx->ctrl_handler, MTK_MDP_MAX_CTRL_NUM);
> +
> + ctx->ctrls.rotate = v4l2_ctrl_new_std(&ctx->ctrl_handler,
> + &mtk_mdp_ctrl_ops, V4L2_CID_ROTATE, 0, 270, 90, 0);
> + ctx->ctrls.hflip = v4l2_ctrl_new_std(&ctx->ctrl_handler,
> + &mtk_mdp_ctrl_ops,
> + V4L2_CID_HFLIP,
> + 0, 1, 1, 0);
> + ctx->ctrls.vflip = v4l2_ctrl_new_std(&ctx->ctrl_handler,
> + &mtk_mdp_ctrl_ops,
> + V4L2_CID_VFLIP,
> + 0, 1, 1, 0);
> + ctx->ctrls.global_alpha = v4l2_ctrl_new_std(&ctx->ctrl_handler,
> + &mtk_mdp_ctrl_ops,
> + V4L2_CID_ALPHA_COMPONENT,
> + 0, 255, 1, 0);
> + ctx->ctrls_rdy = ctx->ctrl_handler.error == 0;
> +
> + if (ctx->ctrl_handler.error) {
> + int err = ctx->ctrl_handler.error;
> +
> + v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> + dev_err(&ctx->mdp_dev->pdev->dev,
> + "Failed to create control handlers\n");
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static void mtk_mdp_set_default_params(struct mtk_mdp_ctx *ctx)
> +{
> + struct mtk_mdp_dev *mdp = ctx->mdp_dev;
> + struct mtk_mdp_frame *frame;
> +
> + frame = mtk_mdp_ctx_get_frame(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> + frame->fmt = mtk_mdp_find_fmt_by_index(0,
> + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> + frame->width = mdp->variant->pix_min->org_w;
> + frame->height = mdp->variant->pix_min->org_h;
> + frame->payload[0] = frame->width * frame->height;
> + frame->payload[1] = frame->payload[0] / 2;
> +
> + frame = mtk_mdp_ctx_get_frame(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> + frame->fmt = mtk_mdp_find_fmt_by_index(0,
> + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> + frame->width = mdp->variant->pix_min->target_rot_dis_w;
> + frame->height = mdp->variant->pix_min->target_rot_dis_h;
> + frame->payload[0] = frame->width * frame->height;
> + frame->payload[1] = frame->payload[0] / 2;
> +
> +}
> +
> +static int mtk_mdp_m2m_open(struct file *file)
> +{
> + struct mtk_mdp_dev *mdp = video_drvdata(file);
> + struct video_device *vfd = video_devdata(file);
> + struct mtk_mdp_ctx *ctx = NULL;
> + int ret;
> +
> + if (mutex_lock_interruptible(&mdp->lock))
> + return -ERESTARTSYS;
This lock is taken very early. Move it down to where you really need the lock,
it can certainly be moved to after the kzalloc.
> +
> + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
> + if (!ctx) {
> + ret = -ENOMEM;
> + goto err_ctx_alloc;
> + }
> +
> + mutex_init(&ctx->slock);
> + ctx->id = mdp->id_counter++;
> + v4l2_fh_init(&ctx->fh, vfd);
> + file->private_data = &ctx->fh;
> + ret = mtk_mdp_ctrls_create(ctx);
> + if (ret)
> + goto error_ctrls;
> +
> + /* Use separate control handler per file handle */
> + ctx->fh.ctrl_handler = &ctx->ctrl_handler;
> + v4l2_fh_add(&ctx->fh);
> + INIT_LIST_HEAD(&ctx->list);
> +
> + ctx->mdp_dev = mdp;
> + mtk_mdp_set_default_params(ctx);
> +
> + INIT_WORK(&ctx->work, mtk_mdp_m2m_worker);
> + ctx->m2m_ctx = v4l2_m2m_ctx_init(mdp->m2m_dev, ctx,
> + mtk_mdp_m2m_queue_init);
> + if (IS_ERR(ctx->m2m_ctx)) {
> + dev_err(&mdp->pdev->dev, "Failed to initialize m2m context");
> + ret = PTR_ERR(ctx->m2m_ctx);
> + goto error_m2m_ctx;
> + }
> + ctx->fh.m2m_ctx = ctx->m2m_ctx;
> + if (mdp->ctx_num++ == 0) {
> + ret = vpu_load_firmware(mdp->vpu_dev);
> + if (ret < 0) {
> + dev_err(&mdp->pdev->dev,
> + "vpu_load_firmware failed %d\n", ret);
> + goto err_load_vpu;
> + }
> +
> + ret = mtk_mdp_vpu_register(mdp->pdev);
> + if (ret < 0) {
> + dev_err(&mdp->pdev->dev,
> + "mdp_vpu register failed %d\n", ret);
> + goto err_load_vpu;
> + }
> + }
> +
> + list_add(&ctx->list, &mdp->ctx_list);
> + mutex_unlock(&mdp->lock);
> +
> + mtk_mdp_dbg(0, "%s [%d]", dev_name(&mdp->pdev->dev), ctx->id);
> +
> + return 0;
> +
> +err_load_vpu:
> + mdp->ctx_num--;
> + v4l2_m2m_ctx_release(ctx->m2m_ctx);
> +error_m2m_ctx:
> + v4l2_ctrl_handler_free(&ctx->ctrl_handler);
> +error_ctrls:
> + v4l2_fh_del(&ctx->fh);
> + v4l2_fh_exit(&ctx->fh);
> +err_ctx_alloc:
> + kfree(ctx);
> + mutex_unlock(&mdp->lock);
> +
> + return ret;
> +}
<snip>
More information about the linux-arm-kernel
mailing list