[PATCH v3 0/9] Add MT8173 Video Decoder Driver

Tiffany Lin tiffany.lin at mediatek.com
Mon Aug 15 02:03:41 PDT 2016


Hi Hans,

I upstream v4 on 8/10, I don't know why this version is not shown in
https://patchwork.kernel.org.
But I could see it in other link.
http://www.spinics.net/lists/arm-kernel/msg523095.html
I refine DocBook and vb2 queue_setup function in v4.

For the MT21 format, if I put MT21 into separate patch, this patch
series will build fail, I was confused how to fix this issue?


For VP9, I will merge this three patchs to V4L2 Decoder patch series.
 * linux-media: [v1,1/3] videodev2.h: add V4L2_PIX_FMT_VP9 format.
     - http://patchwork.linuxtv.org/patch/34392/
 * linux-media: [v1,3/3] V4L: add VP9 format documentation
     - http://patchwork.linuxtv.org/patch/34393/
 * linux-media: [v1,2/3] v4l2-ioctl: add VP9 format description.
     - http://patchwork.linuxtv.org/patch/34394/


best regards,
Tiffany


On Mon, 2016-08-15 at 10:30 +0200, Hans Verkuil wrote:
> Hi Tiffany,
> 
> This needs a v4: the DocBook format has been replaced by sphinx, and I also see that
> the vb2 queue_setup function is out-of-date (the allocation contexts no longer exist).
> 
> There were also a lot of comments about the MT21 format. I recommend splitting off the
> code adding MT21 into separate patches at the end of the patch series. That way if there
> are more comments it is easy to merge everything but those patches relating to MT21.
> 
> Can you also add the patches for the new V4L2_PIX_FMT_VP9 to this patch series? Those
> needs to be updated as well due to the move to sphinx.
> 
> Thanks!
> 
> 	Hans
> 
> On 05/30/2016 02:29 PM, Tiffany Lin wrote:
> > ==============
> >  Introduction
> > ==============
> > 
> > The purpose of this series is to add the driver for video codec hw embedded in the Mediatek's MT8173 SoCs.
> > Mediatek Video Codec is able to handle video decoding of in a range of formats.
> > 
> > This patch series add Mediatek block format V4L2_PIX_FMT_MT21, the decoder driver will decoded bitstream to
> > V4L2_PIX_FMT_MT21 format.
> > 
> > This patch series rely on MTK VPU driver in patch series "Add MT8173 Video Encoder Driver and VPU Driver"[1]
> > and patch "CHROMIUM: v4l: Add V4L2_PIX_FMT_VP9 definition"[2] for VP9 support.
> > Mediatek Video Decoder driver rely on VPU driver to load, communicate with VPU.
> > 
> > Internally the driver uses videobuf2 framework and MTK IOMMU and MTK SMI both have been merged in v4.6-rc1.
> > 
> > [1]https://patchwork.linuxtv.org/patch/33734/
> > [2]https://chromium-review.googlesource.com/#/c/245241/
> > 
> > ==================
> >  Device interface
> > ==================
> > 
> > In principle the driver bases on v4l2 memory-to-memory framework:
> > it provides a single video node and each opened file handle gets its own private context with separate
> > buffer queues. Each context consist of 2 buffer queues: OUTPUT (for source buffers, i.e. bitstream)
> > and CAPTURE (for destination buffers, i.e. decoded video frames).
> > OUTPUT and CAPTURE buffer could be MMAP or DMABUF memory type.
> > VIDIOC_G_CTRL and VIDIOC_G_EXT_CTRLS return V4L2_CID_MIN_BUFFERS_FOR_CAPTURE only when dirver in MTK_STATE_HEADER
> > state, or it will return EAGAIN.
> > Driver do not support subscribe event for control 'User Controls' for now.
> > And it default support export DMABUF for other display drivers.
> > 
> > Change in v3:
> > 1. Refine vdec hw clock setting
> > 2. Refine vp9 codec driver
> > 3. Refine v4l2 codec driver
> > 
> > Change in v2:
> > 1. Add documentation for V4L2_PIX_FMT_MT21
> > 2. Remove DRM_FORMAT_MT21
> > 2. Refine code according to review comments
> > 
> > v4l2-compliance test output:
> > localhost Encode # ./v4l2-compliance -d /dev/video0
> > Driver Info:
> >         Driver name   : mtk-vcodec-dec
> >         Card type     : platform:mt8173
> >         Bus info      : platform:mt8173
> >         Driver version: 4.4.0
> >         Capabilities  : 0x84204000
> >                 Video Memory-to-Memory Multiplanar
> >                 Streaming
> >                 Extended Pix Format
> >                 Device Capabilities
> >         Device Caps   : 0x04204000
> >                 Video Memory-to-Memory Multiplanar
> >                 Streaming
> >                 Extended Pix Format
> > 
> > Compliance test for device /dev/video0 (not using libv4l2):
> > 
> > Required ioctls:
> >         test VIDIOC_QUERYCAP: OK
> > 
> > Allow for multiple opens:
> >         test second video open: OK
> >         test VIDIOC_QUERYCAP: OK
> >         test VIDIOC_G/S_PRIORITY: OK
> > 
> > Debug ioctls:
> >         test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> >         test VIDIOC_LOG_STATUS: OK (Not Supported)
> > 
> > Input ioctls:
> >         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> >         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> >         test VIDIOC_ENUMAUDIO: OK (Not Supported)
> >         test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> >         test VIDIOC_G/S_AUDIO: OK (Not Supported)
> >         Inputs: 0 Audio Inputs: 0 Tuners: 0
> > 
> > Output ioctls:
> >         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> >         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> >         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> >         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> >         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> >         Outputs: 0 Audio Outputs: 0 Modulators: 0
> > 
> > Input/Output configuration ioctls:
> >         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> >         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> >         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> >         test VIDIOC_G/S_EDID: OK (Not Supported)
> > 
> >         Control ioctls:
> >                 test VIDIOC_QUERYCTRL/MENU: OK
> >                 fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-controls.cpp(357): g_ctrl returned an error (11)
> >                 test VIDIOC_G/S_CTRL: FAIL
> >                 fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-controls.cpp(579): g_ext_ctrls returned an error (11)
> >                 test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
> >                 fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-controls.cpp(721): subscribe event for control 'User Controls' failed
> >                 test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: FAIL
> >                 test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> >                 Standard Controls: 2 Private Controls: 0
> > 
> >         Format ioctls:
> >                 test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> >                 test VIDIOC_G/S_PARM: OK (Not Supported)
> >                 test VIDIOC_G_FBUF: OK (Not Supported)
> >                 fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-formats.cpp(405): expected EINVAL, but got 11 when getting format for buftype 9
> >                 test VIDIOC_G_FMT: FAIL
> >                 test VIDIOC_TRY_FMT: OK (Not Supported)
> >                 test VIDIOC_S_FMT: OK (Not Supported)
> >                 test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> > 
> >         Codec ioctls:
> >                 test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> >                 test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> >                 test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> > 
> >         Buffer ioctls:
> >                 test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> >                 fail: ../../../v4l-utils-1.6.0/utils/v4l2-compliance/v4l2-test-buffers.cpp(500): q.has_expbuf(node)
> >                 test VIDIOC_EXPBUF: FAIL
> > 
> > 
> > Total: 38, Succeeded: 33, Failed: 5, Warnings: 0
> > 
> > 
> > Andrew-CT Chen (1):
> >   VPU: mediatek: Add decode support
> > 
> > Tiffany Lin (8):
> >   v4l: add Mediatek compressed video block format
> >   DocBook/v4l: Add compressed video formats used on MT8173 codec driver
> >   dt-bindings: Add a binding for Mediatek Video Decoder
> >   vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver
> >   vcodec: mediatek: Add Mediatek H264 Video Decoder Driver
> >   vcodec: mediatek: Add Mediatek VP8 Video Decoder Driver
> >   vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver
> >   arm64: dts: mediatek: Add Video Decoder for MT8173
> > 
> >  Documentation/DocBook/media/v4l/pixfmt.xml         |    6 +
> >  .../devicetree/bindings/media/mediatek-vcodec.txt  |   57 +-
> >  arch/arm64/boot/dts/mediatek/mt8173.dtsi           |   44 +
> >  drivers/media/platform/mtk-vcodec/Makefile         |   15 +-
> >  drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c | 1348 ++++++++++++++++++++
> >  drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h |   88 ++
> >  .../media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c |  408 ++++++
> >  .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c  |  206 +++
> >  .../media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h  |   28 +
> >  drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h |   88 +-
> >  .../media/platform/mtk-vcodec/mtk_vcodec_intr.c    |    4 +-
> >  .../media/platform/mtk-vcodec/mtk_vcodec_intr.h    |    2 +-
> >  .../media/platform/mtk-vcodec/mtk_vcodec_util.c    |   31 +-
> >  .../media/platform/mtk-vcodec/mtk_vcodec_util.h    |    7 +-
> >  .../media/platform/mtk-vcodec/vdec/vdec_h264_if.c  |  503 ++++++++
> >  .../media/platform/mtk-vcodec/vdec/vdec_vp8_if.c   |  630 +++++++++
> >  .../media/platform/mtk-vcodec/vdec/vdec_vp9_if.c   |  967 ++++++++++++++
> >  drivers/media/platform/mtk-vcodec/vdec_drv_base.h  |   56 +
> >  drivers/media/platform/mtk-vcodec/vdec_drv_if.c    |  117 ++
> >  drivers/media/platform/mtk-vcodec/vdec_drv_if.h    |  101 ++
> >  drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h   |  103 ++
> >  drivers/media/platform/mtk-vcodec/vdec_vpu_if.c    |  168 +++
> >  drivers/media/platform/mtk-vcodec/vdec_vpu_if.h    |   96 ++
> >  drivers/media/platform/mtk-vpu/mtk_vpu.c           |   12 +
> >  drivers/media/platform/mtk-vpu/mtk_vpu.h           |   27 +
> >  include/uapi/linux/videodev2.h                     |    1 +
> >  26 files changed, 5090 insertions(+), 23 deletions(-)
> >  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec.h
> >  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_drv.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_pm.h
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_if.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_vp8_if.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_vp9_if.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec_drv_base.h
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec_drv_if.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec_drv_if.h
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec_ipi_msg.h
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec_vpu_if.c
> >  create mode 100644 drivers/media/platform/mtk-vcodec/vdec_vpu_if.h
> > 





More information about the linux-arm-kernel mailing list