[PATCH v4 1/2] Documentation: synopsys-dw-mshc: add binding for resets

[Shawn Lin]

在 2016/8/10 16:03, Guodong Xu 写道:
> Add resets property to synopsys-dw-mshc bindings. It is intended to
> represent the hardware reset signal present internally in some host
> controller IC designs.
>
> See Documentation/devicetree/bindings/reset/reset.txt for details.
>
> Signed-off-by: Guodong Xu <guodong.xu at linaro.org>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
>  Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> index 8636f5a..4e00e85 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
> @@ -39,6 +39,10 @@ Required Properties:
>
>  Optional properties:
>
> +* resets: phandle + reset specifier pair, intended to represent hardware
> +  reset signal present internally in some host controller IC designs.
> +  See Documentation/devicetree/bindings/reset/reset.txt for details.
> +
>  * clocks: from common clock binding: handle to biu and ciu clocks for the
>    bus interface unit clock and the card interface unit clock.
>
>

Reviewed-by: Shawn Lin <shawn.lin at rock-chips.com>

-- 
Best Regards
Shawn Lin