[RFCv2][PATCH 2/5] arm: Implement ARCH_HAS_FORCE_CACHE

Russell King - ARM Linux linux at armlinux.org.uk
Wed Aug 10 16:22:58 PDT 2016


On Mon, Aug 08, 2016 at 10:49:34AM -0700, Laura Abbott wrote:
> +/*
> + * Make an area consistent for devices.
> + * Note: Drivers should NOT use this function directly, as it will break
> + * platforms with CONFIG_DMABOUNCE.
> + * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
> + */
> +void __dma_page_cpu_to_dev(struct page *page, unsigned long off,
> +	size_t size, enum dma_data_direction dir)
> +{
> +	phys_addr_t paddr;
> +
> +	dma_cache_maint_page(page, off, size, dir, dmac_map_area);
> +
> +	paddr = page_to_phys(page) + off;
> +	if (dir == DMA_FROM_DEVICE) {
> +		outer_inv_range(paddr, paddr + size);
> +	} else {
> +		outer_clean_range(paddr, paddr + size);
> +	}
> +	/* FIXME: non-speculating: flush on bidirectional mappings? */
> +}
> +
> +void __dma_page_dev_to_cpu(struct page *page, unsigned long off,
> +	size_t size, enum dma_data_direction dir)
> +{
> +	phys_addr_t paddr = page_to_phys(page) + off;
> +
> +	/* FIXME: non-speculating: not required */
> +	/* in any case, don't bother invalidating if DMA to device */
> +	if (dir != DMA_TO_DEVICE) {
> +		outer_inv_range(paddr, paddr + size);
> +
> +		dma_cache_maint_page(page, off, size, dir, dmac_unmap_area);
> +	}
> +
> +	/*
> +	 * Mark the D-cache clean for these pages to avoid extra flushing.
> +	 */
> +	if (dir != DMA_TO_DEVICE && size >= PAGE_SIZE) {
> +		unsigned long pfn;
> +		size_t left = size;
> +
> +		pfn = page_to_pfn(page) + off / PAGE_SIZE;
> +		off %= PAGE_SIZE;
> +		if (off) {
> +			pfn++;
> +			left -= PAGE_SIZE - off;
> +		}
> +		while (left >= PAGE_SIZE) {
> +			page = pfn_to_page(pfn++);
> +			set_bit(PG_dcache_clean, &page->flags);
> +			left -= PAGE_SIZE;
> +		}
> +	}
> +}

I _really_ don't want these exposed in any shape or form to driver
code.  I've seen too many hacks out there where people have gone
under the cover of the APIs they should be using, and headed straight
for the low-level functionality - adding function prototypes to get
at stuff they have no business doing.  Moving this here is just
asking for it to be abused.

> +
> +void kernel_force_cache_clean(struct page *page, size_t size)
> +{
> +	__dma_page_cpu_to_dev(page, 0, size, DMA_BIDIRECTIONAL);
> +}
> +
> +void kernel_force_cache_invalidate(struct page *page, size_t size)
> +{
> +	__dma_page_dev_to_cpu(page, 0, size, DMA_BIDIRECTIONAL);
> +}

Nothing in our implementation of these DMA operations guarantees
that those mean "clean" and "invalidate".  The DMA operations are
there so that CPUs can implement whatever they need at the map and
unmap times - and I've been very careful not to specify which cache
operations are involved.

For example, on older CPUs, __dma_page_dev_to_cpu() is almost
always a no-op.

If you want something that does something specific, then we need
something designed to do something specific.  Please don't re-use
what you think will fit.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.



More information about the linux-arm-kernel mailing list